Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)

Zerstörungsfreie Prüfung von Stahlrohren - Teil 1: Automatisierte elektromagnetische Prüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) Stahlrohre zum Nachweis der Dichtheit - Änderung 1: Änderung der Maße der Bezugsnut; Änderung der Zulässigkeitskriterien (ISO 10893-1:2011/Amd 1:2020)

No scope available

Essais non destructifs des tubes en acier - Partie 1: Contrôle automatisé électromagnétique pour vérification de l'étanchéité hydraulique des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1: Changement de dimensions de l'entaille de référence; changement des critères d'acceptation (ISO 10893-1:2011/Amd 1:2020)

Neporušitveno preskušanje jeklenih cevi - 1. del: Avtomatizirano elektromagnetno preskušanje brezšivnih in varjenih (razen obločno varjenih pod praškom) jeklenih cevi za preverjanje neprepustnosti - Dopolnilo A1: Sprememba dimenzij zareze - sprememba meril sprejemljivosti (ISO 10893-1:2011/Amd 1:2020)

General Information

Status
Published
Publication Date
09-Jun-2020
Withdrawal Date
30-Dec-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
10-Jun-2020
Completion Date
10-Jun-2020

Relations

Buy Standard

Amendment
EN ISO 10893-1:2011/A1:2020
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
EN ISO 10893-1:2011/oprA1:2019
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10893-1:2011/A1:2020
01-september-2020
Neporušitveno preskušanje jeklenih cevi - 1. del: Avtomatizirano elektromagnetno
preskušanje brezšivnih in varjenih (razen obločno varjenih pod praškom) jeklenih
cevi za preverjanje neprepustnosti - Dopolnilo A1: Sprememba dimenzij zareze -
sprememba meril sprejemljivosti (ISO 10893-1:2011/Amd 1:2020)
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of
seamless and welded (except submerged arc-welded) steel tubes for the verification of
hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch -
change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 1: Automatisierte elektromagnetische
Prüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter)
Stahlrohre zum Nachweis der Dichtheit - Änderung 1 (ISO 10893-1:2011/Amd 1:2020)
Essais non destructifs des tubes en acier - Partie 1: Contrôle automatisé
électromagnétique pour vérification de l'étanchéité hydraulique des tubes en acier sans
soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1:
Changement de dimensions de l'entaille de référence; changement critères d'acceptation
(ISO 10893-1:2011/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 10893-1:2011/A1:2020
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
SIST EN ISO 10893-1:2011/A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10893-1:2011/A1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 10893-1:2011/A1:2020


EN ISO 10893-1:2011/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2020
EUROPÄISCHE NORM
ICS 77.140.75; 77.040.20; 23.040.10
English Version

Non-destructive testing of steel tubes - Part 1: Automated
electromagnetic testing of seamless and welded (except
submerged arc-welded) steel tubes for the verification of
hydraulic leaktightness - Amendment 1: Change of
dimensions of the reference notch; change acceptance
criteria (ISO 10893-1:2011/Amd 1:2020)
Essais non destructifs des tubes en acier - Partie 1: Zerstörungsfreie Prüfung von Stahlrohren - Teil 1:
Contrôle automatisé électromagnétique pour Automatisierte elektromagnetische Prüfung nahtloser
vérification de l'étanchéité hydraulique des tubes en und geschweißter (ausgenommen
acier sans soudure et soudés (sauf à l'arc immergé sous unterpulvergeschweißter) Stahlrohre zum Nachweis
flux en poudre) - Amendement 1: Changement de der Dichtheit - Änderung 1 (ISO 10893-1:2011/Amd
dimensions de l'entaille de référence; changement des 1:2020)
critères d'acceptation (ISO 10893-1:2011/Amd
1:2020)
This amendment A1 modifies the European Standard EN ISO 10893-1:2011; it was approved by CEN on 11 May 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10893-1:2011/A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 10893-1:2011/A1:2020
EN ISO 10893-1:2011/A1:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 10893-1:2011/A1:2020
EN ISO 10893-1:2011/A1:2020 (E)
European foreword
This document (EN ISO 10893-1:2011/A1:2020) has been prepared by Technical Committee ISO/TC 17
"Stee
...

SLOVENSKI STANDARD
SIST EN ISO 10893-1:2011/oprA1:2019
01-november-2019
Neporušitveno preskušanje jeklenih cevi - 1. del: Avtomatizirano elektromagnetno
preskušanje brezšivnih in varjenih (razen obločno varjenih pod praškom) jeklenih
cevi za preverjanje neprepustnosti - Dopolnilo A1: Sprememba dimenzij zareze -
sprememba meril sprejemljivosti (ISO 10893-1:2011/DAM 1:2019)
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of
seamless and welded (except submerged arc-welded) steel tubes for the verification of
hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch -
change acceptance criteria (ISO 10893-1:2011/DAM 1:2019)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 1: Automatisierte elektromagnetische
Prüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter)
Stahlrohre zum Nachweis der Dichtheit - Änderung 1 (ISO 10893-1:2011/DAM 1:2019)
Essais non destructifs des tubes en acier - Partie 1: Contrôle automatisé
électromagnétique pour vérification de l'étanchéité hydraulique des tubes en acier sans
soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1:
Changement de dimensions de l'entaille de référence; changement critères d'acceptation
(ISO 10893-1:2011/DAM 1:2019)
Ta slovenski standard je istoveten z: EN ISO 10893-1:2011/prA1
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
SIST EN ISO 10893-1:2011/oprA1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10893-1:2011/oprA1:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 10893-1:2011/oprA1:2019
DRAFT AMENDMENT
ISO 10893-1:2011/DAM 1
ISO/TC 17/SC 19 Secretariat: UNI
Voting begins on: Voting terminates on:
2019-08-20 2019-11-12
Non-destructive testing of steel tubes —
Part 1:
Automated electromagnetic testing of seamless and
welded (except submerged arc-welded) steel tubes for the
verification of hydraulic leaktightness
AMENDMENT 1: Change of dimensions of the reference notch;
change acceptance criteria
Essais non destructifs des tubes en acier —
Partie 1: Contrôle automatisé électromagnétique pour vérification de l'étanchéité hydraulique des tubes en
acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre)
AMENDEMENT 1: Changement de dimensions de l'encoche de référence; changement critères d'acceptation
ICS: 23.040.10; 77.040.20; 77.140.75
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.