EN ISO 734-2:2008

Oilseed meals - Determination of oil content - Part 2: Rapid extraction method (ISO 734-2:2008)

This part of ISO 734 specifies an extraction method which may be used to assess the efficiency of a de-oiling process by comparing the oil content of the oilseed with the residual oil content of the corresponding extraction meals, pellets and expeller cakes. It is not applicable to disputed cases, for which ISO 734-1 is applicable. It is applicable to oilseed meals obtained from oilseeds by expelling or by extraction with a solvent, as well as to the pellets made from the residues.

Ölsamenschrote - Bestimmung des Ölgehaltes - Teil 2: Schnellextraktionsverfahren (ISO 734-2:2008)

Dieser Teil von ISO 734 legt ein Extraktionsverfahren fest, das zur Beurteilung der Wirksamkeit von Ölgewinnungsverfahren durch Vergleich des Ölgehaltes der Ölsamen mit dem Restölgehalt in den jeweiligen Extraktionsschroten, Pellets und Ölkuchen verwendet werden darf.
Das Verfahren ist nicht anwendbar auf strittige Fälle, für die ISO 734-1 anwendbar ist.
Das Verfahren ist anwendbar auf Ölsamenschrote, die durch Pressen oder durch Extraktion mit einem Lösungsmittel aus Ölsamen gewonnen wurden, sowie auf die aus den Rückständen hergestellten Pellets.

Tourteaux de graines oléagineuses - Détermination de la teneur en huile - Partie 2: Méthode rapide par extraction (ISO 734-2:2008)

Ostanki tropin - Določevanje olja - 2. del: Metoda hitre ekstrakcije (ISO 734-2:2008)

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-2008
• Withdrawal Date: 06-Apr-2010
• ICS: 67.200.20 - Oilseeds
• Technical Committee: CEN/TC 307 - Oilseeds, vegetables and animal fats and oils and their by-products - Methods of sampling and analys
• Drafting Committee: CEN/TC 307 - Oilseeds, vegetables and animal fats and oils and their by-products - Methods of sampling and analys
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 07-Apr-2010
• Completion Date: 07-Apr-2010
• Ref Project: SIST EN ISO 734-2:2009 - Oilseed meals - Determination of oil content - Part 2: Rapid extraction method (ISO 734-2:2008)

Relations

• Replaces: EN ISO 734-2:2000 - Oilseed residues - Determination of oil content - Part 2: Rapid extraction method (ISO 734-2:1998)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 734-2:2010 - Oilseed meals - Determination of oil content - Part 2: Rapid extraction method (ISO 734-2:2008, corrected version 2009-06-01)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 734-2:2009
01-januar-2009
1DGRPHãþD
SIST EN ISO 734-2:2001
2VWDQNLWURSLQ'RORþHYDQMHROMDGHO0HWRGDKLWUHHNVWUDNFLMH,62
Oilseed meals - Determination of oil content - Part 2: Rapid extraction method (ISO 734-
2:2008)
Ölsamenschrote - Bestimmung des Ölgehaltes - Teil 2: Schnellextraktionsverfahren (ISO
734-2:2008)
Tourteaux de graines oléagineuses - Détermination de la teneur en huile - Partie 2:
Méthode rapide par extraction (ISO 734-2:2008)
Ta slovenski standard je istoveten z: EN ISO 734-2:2008
ICS:
67.200.20 Oljnice Oilseeds
SIST EN ISO 734-2:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 734-2:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 734-2:2009
EUROPEAN STANDARD
EN ISO 734-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2008
ICS 67.200.20 Supersedes EN ISO 734-2:2000
English Version
Oilseed meals - Determination of oil content - Part 2: Rapid
extraction method (ISO 734-2:2008)
Tourteaux de graines oléagineuses - Détermination de la Ölsamenschrote - Bestimmung des Ölgehaltes - Teil 2:
teneur en huile - Partie 2: Méthode rapide par extraction Schnellextraktionsverfahren (ISO 734-2:2008)
(ISO 734-2:2008)
This European Standard was approved by CEN on 21 June 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 734-2:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 734-2:2009
EN ISO 734-2:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 734-2:2009
EN ISO 734-2:2008 (E)
Foreword
This document (EN ISO 734-2:2008) has been prepared by Technical Committee ISO/TC 34 "Agricultural
food products" in collaboration with Technical Committee CEN/TC 307 “Oilseeds, vegetable and animal fats
and oils and their by-products - Methods of sampling and analysis” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2009, and conflicting national standards shall be withdrawn at
the latest by January 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 734-2:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 734-2:2008 has been approved by CEN as a EN ISO 734-2:2008 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 734-2:2009

---------------------- Page: 6 ----------------------

SIST EN ISO 734-2:2009

INTERNATIONAL ISO
STANDARD 734-2
Second edition
2008-07-01


Oilseed meals — Determination of oil
content —
Part 2:
Rapid extraction method
Tourteaux de graines oléagineuses — Détermination de la teneur en
huile —
Partie 2: Méthode rapide par extraction




Referen
...