SIST EN 13647:2011
(Main)Wood flooring and wood panelling and cladding - Determination of geometrical characteristics
Wood flooring and wood panelling and cladding - Determination of geometrical characteristics
This European Standard specifies methods of measuring the geometrical characteristics of wood flooring and wood panelling and cladding elements.
This document does not specify sampling, which is intended to be found in the product standards or test methods and it does not apply to elements which are installed.
Holzfussböden und Wand-und Deckenbekleidungen aus Holz - Bestimmung geometrischer Eigenschaften
Diese Europäische Norm legt Messverfahren für die Bestimmung der geometrischen Eigenschaften von Holzfußböden sowie von Elementen für Wand- und Deckenbekleidungen aus Holz fest.
Die Probenahme wird in dieser Europäischen Norm nicht festgelegt, sie ist den Produktnormen oder Prüfverfahren zu entnehmen. Diese Norm gilt nicht für eingebaute Elemente.
Planchers en bois et lambris et bardages en bois - Mesure des caractéristiques géométriques
Le présent document définit des méthodes de mesure des caractéristiques géométriques des éléments de planchers, de lambris et de bardages en bois.
Le présent document ne définit pas l'échantillonnage que l'on doit trouver dans les normes de produit ou les méthodes d'essais et elle ne s'applique pas aux éléments installés.
Lesene talne obloge in lesen opaž ter lesne obloge zidu - Ugotavljanje geometrijskih lastnosti
Ta evropski standard določa metode merjenja geometrijskih lastnosti lesenih talnih oblog in elementov lesnih oblog zidu ter lesenega opaža. Ta dokument ne določa vzorčenja, ki ga je najti v proizvodnih standardih, ali testnih metod in se ne uporablja za vgrajene elemente.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lesene talne obloge in lesen opaž ter lesne obloge zidu - Ugotavljanje geometrijskih lastnostiHolzfussböden und Wand-und Deckenbekleidungen aus Holz - Bestimmung geometrischer EigenschaftenPlanchers en bois et lambris et bardages en bois - Mesure des caractéristiques géométriquesWood flooring and wood panelling and cladding - Determination of geometrical characteristics97.150Netekstilne talne oblogeNon-textile floor coverings79.080Polizdelki iz lesaSemi-manufactures of timberICS:Ta slovenski standard je istoveten z:EN 13647:2011SIST EN 13647:2011en,fr,de01-oktober-2011SIST EN 13647:2011SLOVENSKI
STANDARDSIST EN 13647:20031DGRPHãþD
SIST EN 13647:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13647
May 2011 ICS 79.080 Supersedes EN 13647:2002English Version
Wood flooring and wood panelling and cladding - Determination of geometrical characteristics
Planchers en bois et lambris et bardages en bois - Détermination des caractéristiques géométriques
Holzfußböden und Wand- und Deckenbekleidungen aus Holz - Bestimmung geometrischer Eigenschaften This European Standard was approved by CEN on 14 April 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13647:2011: ESIST EN 13647:2011
EN 13647:2011 (E) 2 Contents Page Foreword .4 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Principles .5 4.1 General .5 4.2 Dimensions .5 4.3 Angles .5 4.4 Warp .5 4.4.1 Cup .5 4.4.2 Bow .7 4.4.3 Spring .8 4.5 Lipping .9 5 Equipment . 10 5.1 General . 10 5.2 Equipment to measure the dimensions . 10 5.2.1 Calliper . 10 5.2.2 Micrometer . 10 5.2.3 Graduated rule . 10 5.3 Equipment to measure angle values . 10 5.3.1 General . 10 5.3.2 Equipment for square cut elements . 11 5.3.3 Equipment for mitre-cut elements . 11 5.4 Equipment to measure warp . 11 5.4.1 Equipment to measure cup . 11 5.4.2 Calibration plate . 11 5.4.3 Equipment to measure bow and spring . 11 5.4.4 Equipment to measure lipping . 11 5.4.5 Conditioning equipment, if relevant . 11 6 Procedure . 12 6.1 Dimensions and shape . 12 6.2 Conditioning . 12 6.3 Measurement and recording . 12 6.4 Dimensions . 12 6.4.1 Length and width of the element . 12 6.4.2 Thickness of the element . 12 6.5 Additional dimensions, if relevant . 13 6.5.1 Overall dimensions . 13 6.5.2 Depth of the groove . 13 6.5.3 Width of the tongue . 13 6.5.4 Thickness of the tongue . 14 6.5.5 Width of the groove . 14 6.5.6 Undercut . 14 6.5.7 Thickness of the upper lip . 14 6.5.8 Thickness above the groove . 14 6.6 Angles . 15 6.6.1 Squareness . 15 SIST EN 13647:2011
EN 13647:2011 (E) 3 6.6.2 Mitre cuts . 15 6.7 Warp . 15 6.7.1 Cup . 15 6.7.2 Bow . 16 6.7.3 Spring . 16 6.7.4 Lipping . 16 7 Expression of results . 16 7.1 Dimensions . 16 7.1.1 Length and width of the element . 16 7.1.2 Thickness of the element. 16 7.2 Additional dimensions, if relevant . 17 7.2.1 Overall dimensions . 17 7.2.2 Depth of the groove . 17 7.2.3 Width of the tongue . 17 7.2.4 Undercut . 17 7.2.5 Thickness of the tongue . 17 7.2.6 Width of the tongue . 17 7.2.7 Thickness of the upper lip . 17 7.2.8 Thickness above the groove . 17 7.3 Angle measurement . 17 7.3.1 Squareness . 17 7.3.2 Mitre cuts . 18 7.4 Warp . 18 7.4.1 Cup . 18 7.4.2 Bow . 18 7.4.3 Spring . 18 7.4.4 Lipping . 18 8 Test report . 18 Annex A (informative)
Apparatus for square cut elements . 19 Annex B (normative)
Test rig to measure cup . 20
SIST EN 13647:2011
EN 13647:2011 (E) 4 Foreword This document (EN 13647:2011) has been prepared by Technical Committee CEN/TC N7o “oound and sawn timber”, the secretariat of which is held by AcNlo. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2011, and conflicting national standards shall be withdrawn at the latest by November 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13647:2002. Compared with EN 13647:2002, the following modifications have been made: a) In 6.2, the NOTE has been completed, b) 6.3 has been improved, c) New presentation of 6.5, d) New figures for 6.5.2 "Depth of the groove" , e) New figures for 6.5.3 "Width of the tongue", f) New figures for "undercut"
g) Adding of accuracy of "length and width of the element" in 7.1.1, h) New values of "bow", in 7.4.2, i) New values of "spring" in 7.4.3 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Introduction This document is one of a series of standards specifying requirements and test methods for wood flooring and wood panelling and cladding. The measurements should be carried out as specified in this standard or with any other equipment or principles giving at least the same accuracy. SIST EN 13647:2011
EN 13647:2011 (E) 5 1 Scope This European Standard specifies methods of measuring the geometrical characteristics of wood flooring and wood panelling and cladding elements. This European Standard does not specify sampling, which is intended to be found in the product standards or test methods and it does not apply to elements which are installed. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13756:2002, Wood flooring – Terminology 3 Terms and definitions For the purposes of this document, the ter
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.