EN 4495:2006

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C

This standard specifies the characteristics of bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating.
Classification: 1 100 MPa  ) / 315 °C.

Luft- und Raumfahrt - Sechskant-Passschrauben, kurzes Gewinde, aus Titanlegierung, anodisiert, mit Aluminium pigmentierter Beschichtung, metrische Reihe - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 °C

Diese Norm legt die Eigenschaften von Sechskant-Passschrauben mit kurzem Gewinde, aus Titanlegierung, anodisiert, mit aluminiumpigmentierter Beschichtung, metrische Reihe fest.
Klasse: 1 100 MPa )/315 °C )

Série aérospatiale - Vis à tête hexagonale normale, fût normal à tolérance serrée, filetage court, en alliage de titane, anodisées, avec revêtement alumino-organique, série métrique - Classification : 1 100 MPa (à température ambiante) / 315 °C

Aeronavtika - Sorniki, normalna šestroba glava, ozka toleranca, kratek navoj, iz titanove zlitine, anodizirani, z aluminijem pigmentiranim premazom, metrska serija - Klasifikacija: 1100 MPa (pri temperaturi okolice)/315 °C

General Information

• Status: Published
• Publication Date: 13-Jun-2006
• Withdrawal Date: 30-Dec-2006
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 31-May-2017
• Ref Project: SIST EN 4495:2009 - Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4495:2009
01-maj-2009
Aeronavtika - Sorniki, normalna šestroba glava, ozka toleranca, kratek navoj, iz
titanove zlitine, anodizirani, z aluminijem pigmentiranim premazom, metrska serija
- Klasifikacija: 1100 MPa (pri temperaturi okolice)/315 °C
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short
thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series -
Classification: 1 100 MPa (at ambient temperature) / 315 °C
Luft- und Raumfahrt - Sechskant-Passschrauben, kurzes Gewinde, aus Titanlegierung,
anodisiert, mit Aluminium pigmentierter Beschichtung, metrische Reihe - Klasse: 1 100
MPa (bei Raumtemperatur) / 315 °C
Série aérospatiale - Vis à tête hexagonale normale, fût normal à tolérance serrée,
filetage court, en alliage de titane, anodisées, avec revêtement alumino-organique, série
métrique - Classification : 1 100 MPa (à température ambiante) / 315 °C
Ta slovenski standard je istoveten z: EN 4495:2006
ICS:
49.025.20 Aluminij Aluminium
49.025.30 Titan Titanium
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN 4495:2009 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4495:2009

---------------------- Page: 2 ----------------------

SIST EN 4495:2009


EUROPEAN STANDARD EN 4495

NORME EUROPÉENNE

EUROPÄISCHE NORM June 2006
ICS 49.030.20
English Version
Aerospace series - Bolts, normal hexagonal head, close
tolerance normal shank, short thread, in titanium alloy, anodized,
with aluminium pigmented coating, metric series - Classification:
1 100 MPa (at ambient temperature) / 315 °C
Série aérospatiale - Vis à tête hexagonale normale, fût Luft- und Raumfahrt - Sechskant-Paßschrauben, kurzes
normal à tolérance serrée, filetage court, en alliage de
Gewinde, aus Titanlegierung, anodisiert, mit Aluminium
titane, anodisées, avec revêtement alumino-organique, pigmenttete Beschichtung, metrische Reihe - Klasse: 1 100
série métrique - Classification : 1 100 MPa (à température MPa (bei Raumtemperatur) / 315 °C
ambiante) / 315 °C
This European Standard was approved by CEN on 13 January 2006.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4495:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4495:2009
EN 4495:2006 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Required characteristics.5
4 Designation .9
5 Marking .9
6 Technical specification .9
7 Oversized bolts . 10

2

---------------------- Page
...