EN 14423:2013+A1:2016/prA2:2018

Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar

This European Standard specifies the design, materials and dimensions of fittings for clamp type coupling assemblies for use with nominal sizes DN 15 to DN 50 steam and hot water hoses. It covers assemblies up to a maximum working pressure of 18 bar ) (corresponding to a saturated steam temperature of 210 °C).

Schlaucharmaturen mit Klemmfassung für Dampf bis 18 bar

Raccords avec colliers de serrage pour tuyaux à vapeur utilisant une pression jusqu'à 18 bar

Cevne armature z objemkami za cevi za paro do 18 bar - Dopolnilo A2

General Information

• Status: Not Published
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218/WG 5 - Couplings and hose fittings
• Ref Project: SIST EN 14423:2013+A1:2016/oprA2:2018 - Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar

Relations

• Merged Into: EN 14423:2013+A2:2019 - Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
• Effective Date: 19-Jan-2023
• Amends: EN 14423:2013+A1:2016 - Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
• Effective Date: 19-Jul-2017

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2018
Cevne armature z objemkami za cevi za paro do 18 bar - Dopolnilo A2
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18
bar
Schlaucharmaturen mit Klemmfassung für Dampf bis 18 bar
Raccords avec colliers de serrage pour tuyaux à vapeur utilisant une pression jusqu'à 18
bar
Ta slovenski standard je istoveten z: EN 14423:2013+A1:2016/prA2:2018
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN en,fr,de
14423:2013+A1:2016/oprA2:2018
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 14423:2013+A1:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA2
August 2018
ICS 23.040.70
English Version
Clamp type coupling assemblies for use with steam hoses
rated for pressures up to 18 bar
Schlaucharmaturen mit Klemmfassung für Dampf bis
18 bar
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 218.

This draft amendment A2, if approved, will modify the European Standard EN 14423:2013+A1:2016. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icelan
...