iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1904:2000

(Main)

Precious metals - The finenesses of solders used with precious metal jewellery alloys

Precious metals - The finenesses of solders used with precious metal jewellery alloys

This European Standard specifies the precious metal content in solders suitable for use in the production of jewellery made of precious metal alloys.

Edelmetall - Nennfeingehalte von Loten für Edelmetall-Schmucklegierungen

Diese Europäische Norm legt den Edelmetallgehalt in Loten fest, die zur Anwendung in der Schmuckherstellung aus Edelmetallegierungen geeignet sind.

Métaux précieux - Titre des soudures utilisées pour les alliages de métaux précieux pour les articles de joaillerie

La présente norme européenne prescrit la teneur en métaux précieux des soudures qui conviennent pour la production d'articles de joaillerie faits d'alliages de métaux précieux.

Plemenite kovine - Čistine spajk za spajkanje zlitin iz plemenitih kovin za izdelavo nakita

General Information

Status
Published
Publication Date
19-Sep-2000
Withdrawal Date
30-Mar-2001
ICS
39.060 - Jewellery
Technical Committee
CEN/TC 410 - Project Committee - Consumer confidence and nomenclature in the diamond industry
Drafting Committee
CEN/TC 283/WG 1 - Sampling and analysis
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
08-Jun-2022
Ref Project
SIST EN 1904:2002 - Precious metals - The finenesses of solders used with precious metal jewellery alloys

Buy Standard

EN 1904:2002EN 1904:2002
PreviousNext
Standard
EN 1904:2002
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QDNLWDEdelmetall - Nennfeingehalte von Loten für Edelmetall-SchmucklegierungenMétaux précieux - Titre des soudures utilisées pour les alliages de métaux précieux pour les articles de joailleriePrecious metals - The finenesses of solders used with pre
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 11427:2024(Main)
Jewellery and precious metals - Determination of silver - Potentiometry using potassium bromide (ISO 11427:2024)
SIST EN ISO 11427:2024

This document specifies a volumetric method for the determination of silver on a material considered homogeneous. The silver content of the sample lies preferably between (100 and 999,0) parts per thousand (‰) by mass. Fineness above 999,0 ‰ can be determined using a spectroscopy method by difference (e.g. ISO 15096).
This method is intended to be used as the reference method for the determination of fineness in alloys covered by ISO 9202.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11210:2023(Main)
Jewellery and precious metals - Determination of platinum - Gravimetry using ammonium chloride (ISO 11210:2023)
SIST EN ISO 11210:2023

This document specifies a gravimetric method for the determination of platinum on a material considered homogeneous. The platinum content of the sample lies preferably between 50 and 999 parts per thousand (‰) by mass. Fineness above 999 ‰ can be determined using a spectroscopy method by difference (e.g. ISO 15093).
This method is also intended to be used as one of the recommended methods for the determination of fineness in jewellery alloys covered by ISO 9202.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11490:2023(Main)
Jewellery and precious metals - Determination of palladium - Gravimetry using dimethylglyoxime (ISO 11490:2023)
SIST EN ISO 11490:2023

This document specifies a gravimetric method for the determination of palladium on a material considered homogeneous. The palladium content of the sample lies preferably between 50 and 999 parts per thousand (‰) by mass. Fineness above 999 ‰ can be determined using a spectroscopy method by difference (e.g. ISO 15093).
This method is also intended to be used as one of the recommended methods for the determination of fineness in jewellery alloys covered by ISO 9202.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11426:2021(Main)
Jewellery and precious metals - Determination of gold - Cupellation method (fire assay) (ISO 11426:2021)
SIST EN ISO 11426:2021

This document specifies a cupellation method (fire assay) for the determination of gold on a material considered homogeneous. The gold content of the sample lies preferably between 100 and 999,5 parts per thousand (‰) by weight. Fineness above 999,5 ‰ can be determined using a spectroscopy method by difference (e.g. ISO 15093).
The procedure is applicable to most types of gold samples. Some modifications are indicated for specific cases (presence of large amount of base metals, platinum or palladium, silver). It is not compatible with the presence above trace levels of iridium, rhodium and ruthenium (more than 0,25 ‰ for the sum of all three elements).
This method is also intended to be used as the recommended method for the determination of fineness in jewellery alloys covered by ISO 9202.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11494:2019(Main)
Jewellery and precious metals - Determination of platinum in platinum alloys - ICP-OES method using an internal standard element (ISO 11494:2019)
SIST EN ISO 11494:2019

This document describes an analytical procedure for the determination of platinum in platinum alloys with a nominal content up to 990 ‰ (parts per thousand), including alloys according to ISO 9202.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11495:2019(Main)
Jewellery and precious metals - Determination of palladium in palladium alloys - ICP-OES method using an internal standard element (ISO 11495:2019)
SIST EN ISO 11495:2019

This document describes an analytical procedure for the determination of palladium in palladium alloys with a nominal content up to 990 ? (parts per thousand), including alloys according to ISO 9202.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18323:2015(Main)
Jewellery - Consumer confidence in the diamond industry (ISO 18323:2015)
SIST EN ISO 18323:2015

ISO 18323:2015 specifies a set of permitted descriptors for the diamond industry and is specifically designed to be understood by the consumer. The Standard also includes a series of definitions which aim to provide further clarity for traders and maintain consumer confidence in the diamond industry as a whole.
ISO 18323:2015 will cover the nomenclature to be used by those involved in the buying and selling of diamonds, treated diamonds, synthetic diamonds, composite diamonds and imitations of diamonds.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 14547:2005(Main)
Sampling schemes for third party conformity assessment of fineness in precious metal articles
SIST-TP CEN/TR 14547:2006

This Technical Report specifies an acceptance sampling system of single sampling plans both for inspection by attributes and for inspection by variables. The attributes plans are of the accept-zero form, i.e. no lot is accepted if the sample from it contains one or more nonconforming articles. (For the purposes of this Technical Report, a nonconforming article is a precious metal article containing less than the nominal proportion by weight of the precious metal). The variables plans generally require smaller sample sizes than the attributes plans, but require the precious metal content of all the sampled articles to exceed the nominal content by at least a specified amount.
The objective of this Technical Report is to provide accept-zero schemes and procedures for assuring an upper limit to the long-term percentage of nonconforming precious metal articles in the market place (i.e. the percentage of articles reaching the market place that contain less than the nominal proportion of precious metal) by means of the lowest practicable sample sizes. The upper limit provided by this Technical Report is 1,47% nonconforming. The objective is achieved in three ways:
a)   the sample size reduces as the total number of articles accepted in all the lots since the last non-acceptance increases;
b)   if quality is consistently high, then subject to certain conditions it will be possible to switch from sampling by attributes to sampling by variables;
c)   under sampling by variables, further reductions in sample size may be achieved by switching from the unknown standard deviation method (the "s" method) to the known standard deviation method (the "s" method) if there is sufficient evidence that the process standard deviation is constant....

  • Technical report
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 28653:1992(Main)
Jewellery - Ring-sizes - Definition, measurement and designation (ISO 8653:1986)
SIST EN 28653:1998

Defines ring-size as inner circumference of the ring measured in mm.

  • Standard
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11427:2024(Main)
Jewellery and precious metals - Determination of silver - Potentiometry using potassium bromide (ISO 11427:2024)
SIST EN ISO 11427:2024

This document specifies a volumetric method for the determination of silver on a material considered homogeneous. The silver content of the sample lies preferably between (100 and 999,0) parts per thousand (‰) by mass. Fineness above 999,0 ‰ can be determined using a spectroscopy method by difference (e.g. ISO 15096).
This method is intended to be used as the reference method for the determination of fineness in alloys covered by ISO 9202.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day