Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, round flange, solder mounting - Product standard

This standard specifies the characteristics of hermetic receptacles with round flange attached by soldering in the family of circular electrical connectors coupled by bayonet ring.
It applies to class defined in Table 3.
For plugs and protective covers, see EN 3372 008 and EN 3372 006 respectively.

Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 005: Hermetischer fester Steckverbinder mit rundem Schweiß- oder Lötflansch – Produktnorm

Série aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes température d'utilisation - 65 °C à 175 °C ou 200 °C continu - Partie 005 : Embase hermétique à collerette ronde fixée par soudure - Norme de produit

Aeronavtika - Konektorji, električni, okrogli, zaščiteni kontakt, z bajonetnim sklapljanjem, stalna delovna temperatura med -65 °C in 175 °C ali 200 °C - 005. del: Podlaga, hermetična, z okroglo, varjeno ali spajkano prirobnico - Standard za proizvod

General Information

Status
Published
Publication Date
10-Jul-2007
Technical Committee
Drafting Committee
Current Stage
9093 - Decision to confirm - Review Enquiry

Buy Standard

Standard
EN 3372-005:2009
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SURL]YRGLuft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 005: Hermetischer fester Steckverbinder mit rundem Schweiß- oder Lötflansch – ProduktnormSérie aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes température d'utilisation - 65 °C à 175 °C ou 200 °C continu - Partie 005 : Embase hermétique à collerette ronde fixée par soudure - Norme de produitAerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, round flange, solder mounting - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3372-005:2007SIST EN 3372-005:2009en,de01-september-2009SIST EN 3372-005:2009SLOVENSKI

STANDARD
SIST EN 3372-005:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3372-005
July 2007 ICS 49.060 English Version

Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous -Part 005: Receptacle, hermetic, round flange, solder mounting -Product standard

Série aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes, température d'utilisation - 65 °C à 175 ° C ou 200 °C continu - Partie 005 : Embase hermétique à collerette ronde fixée par soudure - Norme de produit

Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 005: Hermetischer fester Steckverbinder mit rundem Schweiß- oder Lötflansch - Produktnorm This European Standard was approved by CEN on 24 June 2006.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36

B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3372-005:2007: ESIST EN 3372-005:2009

EN 3372-005:2007 (E) 2 Contents Page Foreword..............................................................................................................................................................3 1 Scope......................................................................................................................................................4 2 Normative references............................................................................................................................4 3 Terms and definitions...........................................................................................................................4 4 Required characteristics.......................................................................................................................5 5 Designation............................................................................................................................................7 6 Marking...................................................................................................................................................7 7 Technical specification.........................................................................................................................7

SIST EN 3372-005:2009

EN 3372-005:2007 (E) 3 Foreword This document (EN 3372-005:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance wi

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.