Low-voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans

IEC 60364-7-721:2017(E) lays down particular requirements applying to electrical circuits and equipment intended for the use of the caravan for habitation purposes. This new edition includes the following significant technical changes with respect to the previous edition: - a minimum height of not less than 500 mm above the base of the cylinders is now required for cables passing through the gas cylinder compartment; - it is now required that each independent installation shall be provided with its own main isolating switch which shall disconnect all live conductors and which shall be suitably placed in a readily accessible location in the caravan.

Errichten von Niederspannungsanlagen - Teil 7-721: Anforderungen für Betriebsstätten, Räume und Anlagen besonderer Art - Elektrische Anlagen in Caravans und Motorcaravans

Installations électriques à basse tension - Partie 7-721: Exigences pour les installations ou emplacements spéciaux - Installations électriques dans les caravanes et caravanes à moteur

Nizkonapetostne električne inštalacije - 7-721. del: Zahteve za posebne inštalacije ali lokacije - Električne inštalacije v počitniških prikolicah in avtodomih

Posebne zahteve tega dela standarda IEC 60364 se uporabljajo za električne inštalacije v počitniških prikolicah in avtodomih.
Uporabljajo se za električna vezja in opremo, predvidena za uporabo v počitniških prikolicah, namenjenih za bivanje.
Ne uporabljajo se za električna vezja in opremo, namenjena za avtomobile.
Ne uporabljajo se za električne inštalacije v mobilnih hišicah, hišicah v avtokampih in prevoznih enotah.
OPOMBA 1: Za mobilne hišice in hišice v avtokampih veljajo splošne zahteve.
OPOMBA 2: Za prevozne enote glej standard IEC 60364-7-717.
OPOMBA 3: Za namene tega dokumenta so počitniške prikolice in avtodomi imenovani »bivalne prikolice«.
Za take namestitve v bivalnih prikolicah lahko veljajo posebne zahteve nekaterih delov skupine standardov IEC 60364-7, na primer standarda IEC 60364-7-701.

General Information

Status
Published
Publication Date
14-Feb-2019
Current Stage
6060 - Document made available
Due Date
15-Feb-2019
Completion Date
15-Feb-2019

RELATIONS

Buy Standard

Standardization document
HD 60364-7-721:2019
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST HD 60364-7-721:2019
01-junij-2019
Nadomešča:
SIST HD 60364-7-721:2009

Nizkonapetostne električne inštalacije - 7-721. del: Zahteve za posebne inštalacije

ali lokacije - Električne inštalacije v počitniških prikolicah in avtodomih

Low-voltage electrical installations - Part 7-721: Requirements for special installations or

locations - Electrical installations in caravans and motor caravans

Errichten von Niederspannungsanlagen - Teil 7-721: Anforderungen für Betriebsstätten,

Räume und Anlagen besonderer Art - Elektrische Anlagen in Caravans und
Motorcaravans

Installations électriques à basse tension - Partie 7-721: Exigences pour les installations

ou emplacements spéciaux - Installations électriques dans les caravanes et caravanes à

moteur
Ta slovenski standard je istoveten z: HD 60364-7-721:2019
ICS:
43.100 Osebni avtomobili. Bivalne Passenger cars. Caravans
prikolice in lahke prikolice and light trailers
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
SIST HD 60364-7-721:2019 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST HD 60364-7-721:2019
---------------------- Page: 2 ----------------------
SIST HD 60364-7-721:2019
HARMONIZATION DOCUMENT HD 60364-7-721
DOCUMENT D'HARMONISATION
HARMONISIERUNGSDOKUMENT
February 2019
ICS 29.020; 91.140.50 Supersedes HD 60364-7-721:2009
English Version
Low-voltage electrical installations - Part 7-721: Requirements
for special installations or locations - Electrical installations in
caravans and motor caravans
(IEC 60364-7-721:2017, modified)

Installations électriques à basse tension - Partie 7-721: Errichten von Niederspannungsanlagen - Teil 7-721:

Exigences pour les installations ou emplacements spéciaux Anforderungen für Betriebsstätten, Räume und Anlagen

- Installations électriques dans les caravanes et caravanes besonderer Art - Elektrische Anlagen in Caravans und

à moteur Motorcaravans
(IEC 60364-7-721:2017) (IEC 60364-7-721:2017)

This Harmonization Document was approved by CENELEC on 2018-12-17. CENELEC members are bound to comply with the

CEN/CENELEC Internal Regulations which stipulate the conditions for implementation of this Harmonization Document at national level.

Up-to-date lists and bibliographical references concerning such national implementations may be obtained on application to the CEN-

CENELEC Management Centre or to any CENELEC member.

This Harmonization Document exists in three official versions (English, French, German).

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,

Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. HD 60364-7-721:2019 E
---------------------- Page: 3 ----------------------
SIST HD 60364-7-721:2019
HD 60364-7-721:2019 (E)
European foreword

The text of document 64/2200/FDIS, future edition 2 of IEC 60364-7-721, prepared by IEC/TC 64 "Electrical

installations and protection against electrical shock" was submitted to the IEC-CENELEC parallel vote and

approved by CENELEC as HD 60364-7-721:2019.

A draft amendment, which covers common modifications to IEC 60364-7-721 (64/2200/FDIS), was prepared

by CLC/TC 64 "Electrical installations and protection against electric shock" and approved by CENELEC.

The following dates are fixed:
• latest date by which this document has (dop) 2019-12-17
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-12-17
standards conflicting with this document
have to be withdrawn
This document supersedes HD 60364-7-721:2009.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Clauses, subclauses, notes, tables, figures and annexes which are additional to those in

IEC 60364-7-721:2017 are prefixed “Z”.
Endorsement notice

The text of the International Standard IEC 60364-7-721:2017 was approved by CENELEC as a European

Standard with agreed common modifications.
---------------------- Page: 4 ----------------------
SIST HD 60364-7-721:2019
HD 60364-7-721:2019 (E)
721.3.1.3
Add the term “caravan holiday home” below the term “mobile home”
721.521
721.521 Types of wiring systems
Replace 712.512.2 by:
721.521.2 The wiring system shall use one or more of the following:

a) insulated single-core cables, with flexible class 5 conductors, in conduits, conduit system, trunking or

trunking system;

b) insulated single-core cables, with stranded class 2 conductors (minimum of 7 strands); in conduit,

conduit systems, trunking, or trunking system;
c) sheathed flexible cables.
All cables shall as a minimum meet the requirements of EN 60332-1-2.
Conduits and conduits systems shall comply with the relevant part of EN 61386.

Cable trunking, cable trunking systems and cable ducting systems shall comply with the relevant part of EN

50085.
---------------------- Page: 5 ----------------------
SIST HD 60364-7-721:2019
HD 60364-7-721:2019 (E)
Add the following Annexes ZA and ZB
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by

(mod), the relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is

available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60038 - IEC standard voltages EN 60038 -
IEC 60309-2 - Plugs, socket-outlets and couplers for EN 60309-2 -
industrial purposes -- Part 2: Dimensional
interchangeability requirements for pin and
contact-tube accessories
IEC 60332-1-2 - Tests on electric and optical fibre cables EN 60332-1-2 -
under fire conditions -- Part 1-2: Test for
vertical flame propagation for a single
insulated wire or cable - Procedure for 1 kW
pre-mixed flame
IEC 60947-2 - Low voltage switchgear and controlgear - Part EN 60947-2 -
2: Circuit-breakers
IEC 61008-1 - Residual current operated circuit-breakers EN 61008-1 -
without integral overcurrent protection for
household and similar uses (RCCB's) -- Part
1: General rules
IEC 61009-1 - Residual current operated circuit-breakers EN 61009-1 -
with integral overcurrent protection for
household and similar uses (RCBOs) -- Part
1: General rules
IEC 61084 series Cable trunking and ducting systems for - -
electrical installations
IEC 61386 series Conduit systems for cable management EN 61386 series
IEC 62423 - Type F and type B residual current operated EN 62423 -
circuit-breakers with and without integral
overcurrent protection for household and
similar uses
---------------------- Page: 6 ----------------------
SIST HD 60364-7-721:2019
HD 60364-7-721:2019 (E)
Annex ZB
(normative)
Special national conditions

Special national condition: National characteristic or practice that cannot be changed even over a long

period, e.g. climatic conditions, electrical earthing conditions.
NOTE If it affects harmonization, it forms part of the Harmonization Document.

For the countries in which the relevant special national conditions apply these provisions are normative, for

other countries they are informative.
Country Clause Special national condition
DE 721.1 Scope
Add the following new note:
NOTE Z1 For extra low-voltage d.c. 12 V installations EN 1648-1 or EN 1648-
2 apply
GB 721.41 Add the following notes at the end of the subclause:
In the United Kingdom, UK law requires that the distributor shall not connect
his combined
neutral and protective conductor to any metalwork in a caravan or boat
(Regulation 9(4) of
The Electricity Safety, Quality and Continuity Regulations 2002 No. 2665).
DE 721.528.2.1 Replace the first Paragraph by the following ones:
“No electrical equipment including wiring systems, except
a) ELV-equipment for gas-supply control,
b) cables running through a gas compartment
shall be installed in any gas cylinder storage compartment.
ELV cables and electrical equipment may only be installed within the LPG
cylinder compartment or housing if the installation serves the operation of the
gas cylinder (e.g. indication of empty gas cylinders) or is for use within the
compartment or housing. Such electrical installations and components shall be
constructed and installed so that they are not a potential source of ignition.
Where cables have to run through such a compartment such cables shall be
protected against mechanical damage by installation within conduit or duct
passing through the compartment.”
DE 721.55.1.1 Replace this subclause by:
Any a.c. electrical inlet on the caravan shall be in compliance with EN 60309-2.
DE 721.55.2.6 In the first Paragraph delete the following text:
“If the appliance inlet installed under 721.55.1.1 complies only with EN 60309-
1,”
DE Annex B Add the following note after the heading:
(informative)
NOTE Z2 This annex does not apply to extra low-voltage d.c. 12 V
Extra low-
installations complying with EN 1648-1 and EN 1648-2.
voltage d.c.
installations
---------------------- Page: 7 ----------------------
SIST HD 60364-7-721:2019
HD 60364-7-721:2019 (E)
Country Clause Special national condition
DE Bibliography Add the following references:
EN 1648-1, Leisure accommodation vehicles – 12 V direct current extra low
voltage electrical installations – Part 1: Caravans
EN 1648-2, Leisure accommodation vehicles – 12 V direct current extra low
voltage electrical installations – Part 2: Motor caravans
B.721.521.2 Add "or flexible" after the word "stranded".
---------------------- Page: 8 ----------------------
SIST HD 60364-7-721:2019
IEC 60364-7-721
Edition 2.0 2017-06
INTERNATIONAL
STANDARD
Low-voltage electrical installations –
Part 7-721: Requirements for special installations or locations – Electrical
installations in caravans and motor caravans
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.020; 91.140.50 ISBN 978-2-8322-4425-8

Warning! Make sure that you obtained this publication from an authorized distributor.

® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 9 ----------------------
SIST HD 60364-7-721:2019
– 2 – IEC 60364-7-721:2017 © IEC 2017
CONTENTS

FOREWORD ........................................................................................................................... 4

INTRODUCTION ..................................................................................................................... 6

721 Electrical installations in caravans and motor caravans ................................................... 7

721.1 Scope .............................................................................................................. 7

721.2 Normative references ....................................................................................... 7

721.3 Terms and definitions ....................................................................................... 8

721.31 Purposes, supplies and structure ..................................................................... 8

721.313 Supplies ........................................................................................................... 8

721.4 Protection for safety ......................................................................................... 9

721.41 Protection against electric shock ...................................................................... 9

721.411 Protective measure: automatic disconnection of supply .................................... 9

721.413 Protective measure: electrical separation ......................................................... 9

721.414 Protective measure: extra-low voltage provided by SELV and PELV ................. 9

721.415 Additional protection ........................................................................................ 9

721.43 Protection against overcurrent ....................................................................... 10

721.5 Selection and erection of equipment .............................................................. 10

721.51 Common rules ................................................................................................ 10

721.510 Introduction .................................................................................................... 10

721.512 Operational conditions and external influences .............................................. 10

721.514 Identification .................................................................................................. 10

721.52 Wiring systems ............................................................................................... 10

721.521 Types of wiring systems ................................................................................. 10

721.522 Selection and erection of wiring systems in relation to external

influences ...................................................................................................... 11

721.524 Cross-sectional areas of conductors .............................................................. 11

721.526 Electrical connections .................................................................................... 11

721.528 Proximity of wiring systems to other services ................................................. 11

721.53 Isolation, switching and control ...................................................................... 12

721.536 Isolation and switching ................................................................................... 12

721.54 Earthing arrangements and protective conductors .......................................... 12

721.543 Protective conductors ..................................................................................... 12

721.55 Other equipment ............................................................................................ 12

Annex A (normative) Instructions for electricity supply ......................................................... 14

Annex B (informative) Extra low-voltage DC installations ..................................................... 15

Annex C (informative) Current-carrying capacities ............................................................... 21

Annex D (informative) List of notes concerning certain countries ......................................... 24

Bibliography .......................................................................................................................... 25

Figure C.721.1 – Graph for obtaining minimum cross-sectional area for conductors for

fixed wiring installations with a voltage drop of 0,8 V ............................................................ 21

Figure C.721.2 – Graph for obtaining minimum cross-sectional area for conductors for

battery cable installations with a voltage drop of 0,3 V .......................................................... 22

---------------------- Page: 10 ----------------------
SIST HD 60364-7-721:2019
IEC 60364-7-721:2017 © IEC 2017 – 3 –
Table 721.1 – Cross-sectional areas of flexible cords and cables for caravan

connection ............................................................................................................................ 13

Table B.721.1 – Functional allocation and cross-sectional areas of cores for caravan

connectors ............................................................................................................................ 18

---------------------- Page: 11 ----------------------
SIST HD 60364-7-721:2019
– 4 – IEC 60364-7-721:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LOW-VOLTAGE ELECTRICAL INSTALLATIONS –
Part 7-721: Requirements for special installations or locations –
Electrical installations in caravans and motor caravans
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 60364-7-721 has been prepared by IEC technical committee 64:

Electrical installations and protection against electrical shock.

This second edition cancels and replaces the first edition published in 2007. This edition

constitutes a technical revision.

This edition includes the following significant technical changes with respect to the previous

edition:

a) A minimum height of not less than 500 mm above the base of the cylinders is now required

for cables passing through the gas cylinder compartment. Where cables have to run

through a compartment such cables shall be protected against mechanical damage by

installation within a continuous conduit or duct passing through the compartment
(721.528.3.1).
---------------------- Page: 12 ----------------------
SIST HD 60364-7-721:2019
IEC 60364-7-721:2017 © IEC 2017 – 5 –

b) It is now required that each independent installation shall be provided with its own main

isolating switch which shall disconnect all live conductors and which shall be suitably

placed in a readily accessible location in the caravan.(721.536.2.1.1)

c) The clause numbers for the protective measures not permitted (obstacles, placing out of

reach, non-conducting locations and earth-free local equipotential bonding) have been

changed.
The text of this International Standard is based on the following documents:
FDIS Report on voting
64/2200/FDIS 64/2210/RVD

Full information on the voting for the approval of this International Standard can be found in

the report on voting indicated in the above table.

This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

A list of all parts in the IEC 60364 series, published under the general title Low-voltage

electrical installations, can be found on the IEC website.

The reader's attention is drawn to the fact that Annex D lists all of the “in-some-country”

clauses on differing practices of a less permanent nature relating to the subject of this

standard.

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to

the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
---------------------- Page: 13 ----------------------
SIST HD 60364-7-721:2019
– 6 – IEC 60364-7-721:2017 © IEC 2017
INTRODUCTION

For the purpose of this part (IEC 60364-7-721) the requirements of the general Parts 1 to 6 of

IEC 60364 apply.

The IEC 60364-7-7XX parts of IEC 60364 contain particular requirements for special

installations or locations which are based on the requirements of the general parts of

IEC 60364 (IEC 60364-1 to IEC 60364-6). These IEC 60364-7-7XX parts are considered in

conjunction with the requirements of the general parts.

The particular requirements of this part of IEC 60364 supplement, modify or replace certain of

the requirements of the general parts of IEC 60364 being valid at the time of publication of

this part. The absence of reference to the exclusion of a part or a clause of a general part

means that the corresponding clauses of the general part are applicable (undated reference).

Requirements of other 7XX parts being relevant for installations covered by this part also

apply. This part may therefore also supplement, modify or replace certain of these

requirements valid at the time of publication of this part.

The clause numbering of this part follows the pattern and corresponding references of

IEC 60364. The numbers following the particular number of this part are those of the

corresponding parts, or clauses of the other parts of the IEC 60364 series, valid at the time of

publication of this part, as indicated in the normative references of this document (dated

reference).

If requirements or explanations additional to those of the other parts of the IEC 60364 series

are needed, the numbering of such items appears as 721.101, 721.102, 721.103 etc.

In the case where new or amended general parts with modified numbering were published

after this part was issued, the clause numbers referring to a general part in this 721 part may

no longer align with the latest edition of the general part. Dated references should be

observed.
---------------------- Page: 14 ----------------------
SIST HD 60364-7-721:2019
IEC 60364-7-721:2017 © IEC 2017 – 7 –
LOW-VOLTAGE ELECTRICAL INSTALLATIONS –
Part 7-721: Requirements for special installations or locations –
Electrical installations in caravans and motor caravans
721 Electrical installations in caravans and motor caravans
721.1 Scope

The particular requirements of this part of IEC 60364 apply to electrical installations in

caravans and motor caravans.

They apply to those electrical circuits and equipment intended for the use of the caravan for

habitation purposes.

They do not apply to those electrical circuits and equipment for automotive purposes.

They do not apply to the electrical installations of mobile homes, residential park homes and

transportable units.

NOTE 1 For mobile homes and residential park homes the general requirements apply.

NOTE 2 For transportable units see IEC 60364-7-717.

NOTE 3 For the purposes of this document, caravans and motor caravans are referred to as “caravans”

The particular requirements of some parts from the IEC 60364-7 series can also apply to such

installations in caravans, for example IEC 60364-7-701.
721.2 Normative references

The following documents are referred to in the text in such a way that some or all of their

content constitutes requirements of this document. For dated references, only the edition

cited applies. For undated references, the latest edition of the referenced document (including

any amendments) applies
IEC 60038, IEC standard voltages

IEC 60309-2, Plugs, socket-outlets and couplers for industrial purposes – Part 2: Dimensional

interchangeability requirements for pin and contact-tube accessories

IEC 60332-1-2, Tests on electric and optical fibre cables under fire conditions – Part 1-2: Test

for vertical flame propagation for a single insulated wire or cable – Procedure for 1 kW pre-

mixed flame
IEC 60947-2, Low-voltage switchgear and controlgear – Part 2: Circuit-breakers

IEC 61008-1, Residual current operated circuit-breakers without integral overcurrent

protection for household and similar uses (RCCBs) – Part 1: General rules

IEC 61009-1, Residual current operated circuit-breakers with integral overcurrent protection

for household and similar uses (RCBOs) – Part 1: General rules

IEC 61084 (all parts), Cables trunking and ducting systems for electrical installations

---------------------- Page: 15 ----------------------
SIST HD 60364-7-721:2019
– 8 – IEC 60364-7-721:2017 © IEC 2017
IEC 61386 (all parts), Conduit systems for cable management

IEC 62423, Type F and Type B residual current operated circuit-breakers with and without

integral overcurrent protection for household and similar uses
721.3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following

addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
721.3.1
leisure accommodation vehicle

unit of living accommodation for temporary or seasonal occupation that may meet the

requirements for the construction and use of road vehicles
721.3.1.1
caravan

trailer leisure accommodation vehicle, used for touring, that meets the requirements for the

construction and use of road vehicles
721.3.1.2
motor caravan

self-propelled leisure accommodation vehicle, used for touring, that meets the requirements

for the construction and use of road vehicles

Note 1 to entry: A motor caravan is either adapted from a series production vehicle, or designed and built on an

existing chassis, with or without the driving cab, the accommodation being either fixed or dismountable.

721.3.1.3
mobile home

transportable leisure accommodation vehicle that includes means for mobility but does not

meet the requirements for the construction and use of road vehicles
721.3.1.4
residential park home
factory produced relocatable dwelling
721.31 Purposes, supplies and structure
721.313 Supplies
721.313.1 General

721.313.1.101 The nominal supply system voltage shall be selected from IEC 60038.

The nominal AC supply voltage of the installation of the caravan shall not exceed 230 V

single-phase, or 400 V three-phase.

The nominal DC supply voltage of the installation of the caravan shall not exceed 48 V.

---------------------- Page: 16 ----------------------
SIST HD 60364-7-721:2019
IEC 60364-7-721:2017 © IEC 2017 – 9 –
721.4 Protection for safety
721.41 Protection against electric shock
721.410.3.5
Add the following:

The protective measures of obstacles and placing out of reach as specified in Annex B of

IEC 60364-4-41:2005 shall not be used.
721.410.3.6
Add the following:
The protective measures of non-
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.