EN 61300-2-34:2009

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures

IEC 61300-2-34:2009(E) provides the procedure for testing fibre optic interconnecting components and closures. The object of this test is to define a standard test method to assess the effects of short term exposure to fluids and lubricants on fibre optic interconnecting components and closures. The main changes from the previous edition are as follows: the procedure and severity have been reconsidered.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-34: Beständigkeit von Verbindungsbauteilen und Muffen gegen Lösemittel und verschmutzende Flüssigkeiten

Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures fondamentales d'essais et de mesures - Partie 2-34: Essais - Résistance des composants d’interconnexion et des boîtiers aux solvants et aux fluides contaminants

La CEI 61300-2-34:2009 est relatif aux essais des composants d'interconnexion et des boîtiers pour fibres optiques. L'objet de cet essai est de définir une méthode d'essai normalisée destinée à évaluer les effets d'une exposition de courte durée des composants d'interconnexion et des boîtiers pour fibres optiques aux fluides et lubrifiants. Les principales modifications par rapport à l'édition précédente sont les suivantes: la procédure et la sévérité ont été réexaminées.

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-34. del: Odpornost proti topilom in kužnim tekočinam iz povezovalnih komponent in ohišij (IEC 61300-2-34:2009)

General Information

• Status: Published
• Publication Date: 14-Jul-2009
• Withdrawal Date: 31-May-2010
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-Jul-2009
• Completion Date: 15-Jul-2009
• Ref Project: SIST EN 61300-2-34:2009 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures (IEC 61300-2-34:2009)

Relations

• Replaces: EN 61300-2-34:1997 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 61300-2-34:2024 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids
• Effective Date: 26-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2009
1DGRPHãþD
SIST EN 61300-2-34:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXVQLLQPHULOQL
SRVWRSNLGHO2GSRUQRVWSURWLWRSLORPLQNXåQLPWHNRþLQDPL]SRYH]RYDOQLK
NRPSRQHQWLQRKLãLM,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating
fluids of interconnecting components and closures (IEC 61300-2-34:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-34: Beständigkeit von Verbindungsbauteilen und Muffen gegen
Lösemittel und verschmutzende Flüssigkeiten (IEC 61300-2-34:2009)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures
fondamentales d'essais et de mesures - Partie 2-34 : Essais - Résistance des
composants d’interconnexion et des boîtiers aux solvants et aux fluides contaminants
(CEI 61300-2-34:2009)
Ta slovenski standard je istoveten z: EN 61300-2-34:2009
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61300-2-34
NORME EUROPÉENNE
July 2009
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61300-2-34:1997

English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-34: Tests -
Resistance to solvents and contaminating fluids
of interconnecting components and closures
(IEC 61300-2-34:2009)
Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Procédures fondamentales d'essais und passive Bauteile -
et de mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-34: Essais - Teil 2-34: Beständigkeit
Résistance des composants von Verbindungsbauteilen
d’interconnexion et des boîtiers und Muffen gegen Lösemittel
aux solvants et aux fluides contaminants und verschmutzende Flüssigkeiten
(CEI 61300-2-34:2009) (IEC 61300-2-34:2009)

This European Standard was approved by CENELEC on 2009-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-34:2009 E
Foreword
The text of document 86B/2826/FDIS, future edition 2 of IEC 61300-2-34, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-34 on 2009-06-01.
This European Standard supersedes EN 61300-2-34:1997.
The main changes from EN 61300-2-34:1997 are as follows: the procedure and severity have been
reconsidered.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-34:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60068-2-74 NOTE  Harmonized as EN 60068-2-74:1999 (not modified).
__________
– 3 – EN 61300-2-34:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 2003
passive components - Basic test and
measurement procedures -
Part 1: General and guidance
1)
Undated reference.
2)
Valid edition at date of issue.

IEC 61300-2-34 ®
Edition 2.0 2009-05
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures –
Part 2-34: Tests – Resistance to solvents and contaminating fluids of
interconnecting components and closures

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
J
ICS 33.180.20 ISBN 2-8318-1041-0
– 2 – 61300-2-34 © IEC:2009(E)
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references.5
3 General description.5
4 Apparatus.5
4.1 Containers.5
4.2 Fluids .5
4.3 Heat source.6
4.4 Oven .6
5 Procedure.6
5.1 General .6
5.2 Preconditioning.6
5.3 Initial examinations and measurements.6
5.4 Conditioning .6
5.5 Recovery .6
5.6 Final examinations and measurements .6
6 Severity .7
6.1 General .7
6.2 Exposure and drying duration.7
6.3 Fuels, lubricants, hydraulic fluids, cleaning agents and moisture repellents
and anti-freeze agents .7
7 Details to be specified.8
Bibliography .9

Table 1 – Preferred test durations .7
Table 2 – Preferred drying durations.7
Table 3 – List of test fluids .8

61300-2-34 © IEC:2009(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 2-34: Tests –
Resistance to solvents and contaminating fluids
of interconnecting components and closures

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61300-2-34 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
This second edition cancels and replaces the first edition published in 1995. The main changes
from the previous edition are as follows: the procedure and severity have been reconsidered.

– 4 – 61300-2-34 © IEC:2009(E)
The text of this standard is based on the following documents:
FDIS Report on voting
86B/2826/FDIS 86B/2851/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 61300 series, under the general title Fibre optic interconnecting
devices and passive components – Basic test and measurement procedures, can be found on
the IEC website.
The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publ
...