EN 60794-3-12:2013
(Main)Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
IEC 60794-3-12:2012 is a detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling to ensure compatibility with ISO/IEC 11801 and ISO/IEC 24702. Those standards have requirements to ensure that models work for generic cabling and system performances. Values in this standard support these models. This second edition cancels and replaces the first edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - reference to ISO/IEC 24702; - reference to Fibre B6 (IEC 60793-2-50); - reference to Fibre A1a.3 (IEC 60793-2-10); - reference to the OS2 Fibre as defined by ISO/IEC 11801; - reference to the OM4 Fibre as defined by ISO/IEC 11801. Keywords: buried optical telecommunication cables, ISO/IEC 11801 and ISO/IEC 24702 This publication is to be read in conjunction with IEC 60794-1-1:2011, IEC 60794-1-2:2003 and IEC 60794-3-10:2009.
Lichtwellenleiterkabel - Teil 3-12: LWL-Außenkabel - Produktspezifikation für LWL-Fernmelde-Erd- und Röhrenkabel für anwendungsneutrale Standortverkabelung
Câbles à fibres optiques - Partie 3-12: Câbles extérieurs - Spécification particulière pour les câbles optiques de télécommunication destinés à être installés dans des conduites ou à être directement enterrés et utilisés dans le câblage de locaux
La CEI 60794-3-12:2012 est une spécification particulière de câbles optiques de télécommunication destinés à être installés dans des conduites ou à être directement enterrés et utilisés dans les câblages de sites. Le but est d'assurer la compatibilité avec l'ISO/CEI 11801 et l'ISO/CEI 24702. Ces normes contiennent des exigences destinées à assurer le fonctionnement des modèles concernant le câblage générique et les performances du système. Les valeurs indiquées dans la présente norme sont compatibles avec ces modèles. Cette seconde édition annule et remplace la première édition, publiée en 2005. La présente édition constitue une révision technique. La présente édition intègre les modifications techniques significatives suivantes par rapport à l'édition précédente: - référence à l'ISO/CEI 24702; - référence aux fibres de catégorie B6 (CEI 60793-2-50); - référence aux fibres de catégorie A1a.3 (CEI 60793-2-10); - référence à la catégorie de fibre OS2 tel que défini par l'ISO/CEI 11801; - référence à la catégorie de fibre OM4 tel que défini par l'ISO/CEI 11801. Mots clés: câbles optiques de télécommunication enterrés, ISO/CEI 11801 et l'ISO/CEI 24702 Cette publication doit être lue conjointement avec la CEI 60794-1-2:2003 et CEI 60794-3-10:2009>
Optični kabli - 3-12. del: Kabli za zunanjo montažo - Podrobna specifikacija za optične telekomunikacijske kable v kanalih ali neposredno zakopane za okabljenje prostorov
Ta del standarda IEC 60794 je podrobna specifikacija za optične telekomunikacijske kable, ki so v kanalih ali neposredno zakopani, za uporabo v okabljenju prostorov, da se zagotovi skladnost s standardoma ISO/IEC 11801 in ISO/IEC 24702. Ti standardi vključujejo zahteve za zagotovitev delovanja modelov za generično okabljenje in delovanje sistema. Vrednosti v tem standardu podpirajo te modele. Zahteve skupinske specifikacije IEC 60794-3-10 se uporabljajo za kable, ki jih zajema ta standard. Posebne zahteve iz točke 4 tega standarda določajo posebno možnost glede na zahteve iz standarda IEC 60794-3-10 ali dodatne zahteve.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2013
2SWLþQLNDEOLGHO .DEOL]D]XQDQMRPRQWDåR3RGUREQDVSHFLILNDFLMD]D
RSWLþQHWHOHNRPXQLNDFLMVNHNDEOHYNDQDOLKDOLQHSRVUHGQR]DNRSDQH]DRNDEOMHQMH
SURVWRURY
Optical fibre cables - Part 3-12: Outdoor optical fibre cables - Detailed specification for
duct and directly buried optical telecommunication cables for use in premises cabling
Lichtwellenleiterkabel - Teil 3-12: LWL-Außenkabel - Produktspezifikation für LWL-
Fernmelde-Erd- und Röhrenkabel für anwendungsneutrale Standortverkabelung
Ta slovenski standard je istoveten z: EN 60794-3-12:2013
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60794-3-12
NORME EUROPÉENNE
June 2013
EUROPÄISCHE NORM
ICS 33.180.10 Supersedes EN 60794-3-12:2006
English version
Optical fibre cables -
Part 3-12: Outdoor cables -
Detailed specification for duct and directly buried optical
telecommunication cables for use in premises cabling
(IEC 60794-3-12:2012)
Câbles à fibres optiques - Lichtwellenleiterkabel -
Partie 3-12: Câbles extérieurs - Teil 3-12: LWL-Außenkabel -
Spécification particulière pour les câbles Produktspezifikation für LWL-Fernmelde-
optiques de télécommunication destinés à Erd- und Röhrenkabel für
être installés dans des conduites ou à être anwendungsneutrale Standortverkabelung
directement enterrés et utilisés dans le (IEC 60794-3-12:2012)
câblage de locaux
(CEI 60794-3-12:2012)
This European Standard was approved by CENELEC on 2013-01-16. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60794-3-12:2013 E
Foreword
The text of document 86A/1471/FDIS, future edition 2 of IEC 60794-3-12, prepared by SC 86A, "Fibres
and cables", of IEC TC 86, "Fibre optics" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 60794-3-12:2013.
The following dates are fixed:
• latest date by which the document has (dop) 2013-12-28
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-01-16
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60794-3-12:2006.
12:2006:
– reference to ISO/IEC 24702;
– reference to Fibre B6 (EN 60793-2-50);
– reference to Fibre A1a.3 (EN 60793-2-10);
– reference to the OS2 Fibre as defined by ISO/IEC 11801
– reference to the OM4 Fibre as defined by ISO/IEC 11801.
This International Standard is to be used in conjunction with EN 60794-1-1, EN 60794-1-2 and EN 60794-
3-10.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60794-3-12:2012 was approved by CENELEC as a European
Standard without any modification.
- 3 - EN 60794-3-12:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60793-2-10 2011 Optical fibres - EN 60793-2-10 2011
Part 2-10: Product specifications - Sectional
specification for category A1 multimode fibres
IEC 60793-2-50 2012 Optical fibres - EN 60793-2-50 2013
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres
IEC 60794-1-1 - Optical fibre cables - EN 60794-1-1 -
Part 1-1: Generic specification - General
IEC 60794-1-2 - Optical fibre cables - EN 60794-1-2 -
Part 1-2: Generic specification - Basic optical
cable test procedures
IEC 60794-3 - Optical fibre cables - EN 60794-3 -
Part 3: Sectional specification - Outdoor
cables
IEC 60794-3-10 - Optical fibre cables - EN 60794-3-10 -
Part 3-10: Outdoor cables - Family
specification for duct, directly buried and
lashed aerial optical telecommunication
cables
ISO/IEC 11801 - Information technology - - -
Generic cabling for customer premises
ISO/IEC 24702 - Information technology - - -
Generic cabling - Industrial premises
IEC 60794-3-12 ®
Edition 2.0 2012-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Optical fibre cables –
Part 3-12: Outdoor cables – Detailed specification for duct and directly buried
optical telecommunication cables for use in premises cabling
Câbles à fibres optiques –
Partie 3-12: Câbles extérieurs – Spécification particulière pour les câbles
optiques de télécommunication destinés à être installés dans des conduites ou
à être directement enterrés et utilisés dans le câblage de locaux
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX J
ICS 33.180.10 ISBN 978-2-83220-509-9
– 2 – 60794-3-12 © IEC:2012
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 General requirements . 6
4 Particular requirements . 6
4.1 General . 6
4.2 MICE (mechanical, ingress, climatic and chemical and electromagnetic)
characteristics . 6
4.3 Transmission requirements. 7
4.3.1 Attenuation of cabled fibre . 7
4.3.2 Fibre bandwidth requirements . 7
4.3.3 Polarization mode dispersion (PMD) requirements . 8
Bibliography . 9
Table 1 – Multimode maximum cable attenuation coefficient (dB/km) . 7
Table 2 – Single-mode maximum cable attenuation coefficient (dB/km) . 7
Table 3 – Minimum multimode fibre bandwidth (MHz × km) . 8
60794-3-12 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL FIBRE CABLES –
Part 3-12: Outdoor cables –
Detailed specification for duct and directly buried optical
telecommunication cables for use in premises cabling
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60794-3-12 has been prepared by subcommittee SC 86A: Fibres
and cables, of IEC technical committee 86: Fibre optics.
This second edition cancels and replaces the first edition published in 2005. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
– reference to ISO/IEC 24702;
– reference to Fibre B6 (IEC 60793-2-50);
– reference to Fibre A1a.3 (IEC 60793-2-10);
– reference to the OS2 Fibre as defined by ISO/IEC 11801;
– reference to the OM4 Fibre as defined by ISO/IEC 11801.
– 4 – 60794-3-12 © IEC:2012
This International Standard is to be used in conjunction with IEC 60794-1-1, IEC 60794-1-2
and IEC 60794-3-10.
The text of this standard is based on the following documents:
FDIS Report on voting
86A/1471/FDIS 86A/1486/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of IEC 60794 series, published under the general title Optical fibre cables,
can be found on the IEC website
The committee has decided that the contents of this publication will remain unchanged until
the stability date i
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.