EN 61169-29:2005

Radio-frequency connectors - Part 29: Sectional specification - Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) - Characteristic impedance 50 ohms (type 1,0/2,3) - 50 omhs and 75 ohms applications

Is a sectional specification (SS) and provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with screw, snap-on, push-pull or quick-lock, slide-in coupling (rack and panel applications) with a characteristic impedance of 50 Ω (type 1,0/2,3) for 50 Ω and 75 Ω applications

Hochfrequenz-Steckverbinder - Teil 29: Rahmenspezifikation - Koaxiale Miniatur-Hochfrequenzsteckverbinder mit Schraub-, Einrast-, Push-pull- oder Schnellverschluss-, Einschubkupplung (Einschubausführung) - Wellenwiderstand 50-Ohm (Typ 1,0/2,3) - 50-Ohm- und 75-Ohm-Anwendungen

Connecteurs pour fréquences radioélectriques - Partie 29: Spécification intermédiaire - Connecteurs coaxiaux miniatures pour fréquences radioélectriques avec accouplements de type vis, pousser-tirer et encliquetage, ou glis (applications de "panneau" et "fond de panier") - Impédance caractéristique 50 ohms (type 1,0/2,3) - Applications à 50 ohms et 75 ohms

Radiofrekvenčni konektorji - 29. del: Področna specifikacija - Miniaturni radiofrekvenčni koaksialni konektorji: navojni, natični, zaklepni, zdrsni (za stojalo in ploščo) - Karakteristična impedanca 50 ohmov (tip 1.0/2,3) - Uporaba za 50 ohmov in 75 ohmov (IEC 61169-29:2005)

General Information

• Status: Published
• Publication Date: 07-Sep-2005
• Withdrawal Date: 30-Jun-2008
• ICS: 33.120.30 - RF connectors
• Technical Committee: CLC/SR 46F - RF and microwave passive components
• Drafting Committee: IEC/SC 46F - IEC_SC_46F
• Parallel Committee: IEC/SC 46F - IEC_SC_46F
• Current Stage: 6060 - Document made available - Publishing
• Completion Date: 08-Sep-2005
• Ref Project: SIST EN 61169-29:2008 - Radio-frequency connectors -- Part 29: Sectional specification - Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) - Characteristic impedance 50 ohms (type 1,0/2,3) - 50 omhs and 75 ohms applications

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2008
5DGLRIUHNYHQþQLNRQHNWRUMLGHO3RGURþQDVSHFLILNDFLMD0LQLDWXUQL
UDGLRIUHNYHQþQLNRDNVLDOQLNRQHNWRUMLQDYRMQLQDWLþQL]DNOHSQL]GUVQL]DVWRMDOR
LQSORãþR.DUDNWHULVWLþQDLPSHGDQFDRKPRYWLS8SRUDED]D
RKPRYLQRKPRY,(&
Radio-frequency connectors - Part 29: Sectional specification - Miniature radio frequency
coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and
panel applications) - Characteristic impedance 50 ohms (type 1,0/2,3) - 50 omhs and 75
ohms applications (IEC 61169-29:2005)
Hochfrequenz-Steckverbinder - Teil 29: Rahmenspezifikation - Koaxiale Miniatur-
Hochfrequenzsteckverbinder mit Schraub-, Einrast-, Push-pull- oder Schnellverschluss-,
Einschubkupplung (Einschubausführung) - Wellenwiderstand 50-Ohm (Typ 1,0/2,3) - 50-
Ohm- und 75-Ohm-Anwendungen (IEC 61169-29:2005)
Connecteurs pour fréquences radioélectriques - Partie 29: Spécification intermédiaire -
Connecteurs coaxiaux miniatures pour fréquences radioélectriques avec accouplements
de type vis, pousser-tirer et encliquetage, ou glis (applications de "panneau" et "fond de
panier") - Impédance caractéristique 50 ohms (type 1,0/2,3) - Applications a 50 ohms et
75 ohms (IEC 61169-29:2005)
Ta slovenski standard je istoveten z: EN 61169-29:2005
ICS:
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML R.F. connectors
5)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61169-29
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2005

ICS 33.120.30
English version
Radio-frequency connectors
Part 29: Sectional specification –
Miniature radio frequency coaxial connectors model screw, snap-on,
push-pull or quick-lock, slide-in (rack and panel applications) –
Characteristic impedance 50 ohms (type 1,0/2,3) –
50 ohms and 75 ohms applications
(IEC 61169-29:2005)
Connecteurs pour fréquences radioélectriques Hochfrequenz-Steckverbinder
Partie 29: Spécification intermédiaire – Teil 29: Rahmenspezifikation –
Connecteurs coaxiaux miniatures pour Koaxiale Miniatur-Hochfrequenzsteckverbinder
fréquences radioélectriques avec mit Schraub-, Einrast-, Push-pull- oder
accouplements de type vis, pousser-tirer Schnellverschluss-, Einschubkupplung
et encliquetage, ou glis (applications de (Einschubausführung) –
"panneau" et "fond de panier") – Wellenwiderstand 50-Ohm (Typ 1,0/2,3) –
Impédance caractéristique 50 ohms 50-Ohm- und 75-Ohm-Anwendungen
(type 1,0/2,3) – (IEC 61169-29:2005)
Applications à 50 ohms et 75 ohms
(CEI 61169-29:2005)
This European Standard was approved by CENELEC on 2005-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61169-29:2005 E
Foreword
The text of document 46F/27/FDIS, future edition 1 of IEC 61169-29, prepared by SC 46F, R.F. and
microwave passive components, of IEC TC 46, Cables, wires, waveguides, R.F. connectors, R.F. and
microwave passive components and accessories, was submitted to IEC-CENELEC parallel vote and
was approved by CENELEC as EN 61169-29 on 2005-07-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61169-29:2005 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61169-29:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 61169-1 1992 Radio-frequency connectors EN 61169-1 1994
Part 1: Generic specification - General
requirements and measuring methods

NORME CEI
INTERNATIONALE
IEC
61169-29
INTERNATIONAL
Première édition
STANDARD
First edition
2005-06
Connecteurs pour fréquences radioélectriques –
Partie 29:
Spécification intermédiaire –
Connecteurs coaxiaux miniatures pour fréquences
radioélectriques avec accouplements de type vis,
pousser-tirer et encliquetage, ou glis (applications
de «panneau» et «fond de panier») –
Impédance caractéristique 50 Ω (type 1,0/2,3) –
Applications à 50 Ω et 75 Ω
Radio-frequency connectors –
Part 29:
Sectional specification –
Miniature radio frequency coaxial connectors
model screw, snap-on, push-pull or quick-lock,
slide-in (rack and panel applications ) –
Characteristic impedance 50 Ω (type 1,0/2,3) –
50 Ω and 75 Ω applications
 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
U
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61169-29  IEC:2005 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references .9
3 IEC type designation .11
4 Interface information.13
4.1 Dimensions .13
4.2 Gauges .21
5 Quality assessment procedures.29
5.1 General .29
5.2 Ratings and characteristics .29
5.3 Test schedule and inspection requirements .37
5.4 Procedures.43
6 Instructions for preparation of detail specifications .43
6.1 General .43
6.2 Identification of the detail specification .43
6.3 Identification of the component.43
6.4 Performance.45
6.5 Marking, ordering information and related matters .45
6.6 Selection of tests, test conditions and severities.45
6.7 Blank detail specification pro-forma for type 1,0/2,3 connector .47

Figure 1 – Interfaces (for dimensions, see Table 1) .13
Figure 2 – Locking devices (for dimensions, see Table 2) .17
Figure 3 – Gauge pin for centre contact of socket connector.21
Figure 4 – Outer contact sizing and retention force gauges A and B .23
Figure 5 – Plug .25
Figure 6 – Socket .27

Table 1 – Dimensions of the interfaces .15
Table 2 – Dimensions of the locking devices.19

61169-29  IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO-FREQUENCY CONNECTORS –
Part 29: Sectional specification –
Miniature radio frequency coaxial connectors model screw, snap-on,
push-pull or quick-lock, slide-in (rack and panel applications) –
Characterisctic impedance 50 Ω (type 1,0/2,3) –
50 Ω and 75 Ω applications
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61169-29 has been prepared by subcommittee 46F: R.F. and
microwave passive components of IEC technical committee 46: Cables, wires, waveguides,
R.F. connectors, R.F. and microwave passive components and accessories.
...