EN 60454-3-19:2003

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides

Contains the requirements for pressure-sensitive adhesive tapes made with various backing materials with both sides covered with a pressure-sensitive adhesive. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application, and not based on this specification alone.

Selbstklebende Bänder für elektrotechnische Anwendungen - Teil 3: Bestimmungen für einzelne Materialien - Blatt 19: Selbstklebende Bänder aus verschiedenen Trägermaterialien mit beidseitigem Klebstoffauftrag

Rubans adhésifs sensibles à la pression à usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 19: Rubans fabriqués à partir de différents matériaux supports avec un adhésif sensible à la pression sur les deux faces

Contient les exigences relatives aux rubans adhésifs sensibles à la pression constitués de différents matériaux supports recouverts sur les deux faces d'un adhésif sensible à la pression. Les matériaux qui sont conformes à cette spécification satisfont à des niveaux de performance établis. Cependant, il convient que le choix d'un matériau par un utilisateur pour une application particulière soit fondé sur les exigences réelles nécessaires pour obtenir les performances satisfaisantes pour cette application et non pas fondé sur cette seule spécification.

Samolepilni trakovi za elektrotehnične namene - 3. del: Specifikacije za posamezne materiale - 19. list: Trakovi iz različnih nosilnih materialov z na pritisk občutljivim lepilom na obeh straneh (IEC 60454-3-19:2003)

General Information

• Status: Published
• Publication Date: 13-Jul-2003
• Withdrawal Date: 30-Jun-2006
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/SC 15C - IEC_SC_15C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 14-Jul-2003
• Completion Date: 14-Jul-2003
• Ref Project: SIST EN 60454-3-19:2004 - Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides

Standards Content (Sample)

SLOVENSKI SIST EN 60454-3-19:2004

STANDARD
september 2004
Samolepilni trakovi za elektrotehnične namene - 3. del: Specifikacije za
posamezne materiale - 19. list: Trakovi iz različnih nosilnih materialov z na
pritisk občutljivim lepilom na obeh straneh (IEC 60454-3-19:2003)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for
individual materials - Sheet 19: Tapes made from various backing materials with
pressure-sensitive adhesive on both sides (IEC 60454-3-19:2003)
ICS 29.035.01 Referenčna številka
SIST EN 60454-3-19:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60454-3-19
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2003

ICS 29.035.20


English version


Pressure-sensitive adhesive tapes for electrical purposes
Part 3: Specifications for individual materials
Sheet 19: Tapes made from various backing materials
with pressure-sensitive adhesive on both sides
(IEC 60454-3-19:2003)


Rubans adhésifs sensibles à la pression  Selbstklebende Bänder für
à usages électriques elektrotechnische Anwendungen
Partie 3: Spécifications pour matériaux Teil 3: Bestimmungen für einzelne
particuliers Materialien
Feuille 19: Rubans fabriqués à partir Blatt 19: Selbstklebende Bänder
de différents matériaux supports aus verschiedenen Trägermaterialien
avec un adhésif sensible à la pression mit beidseitigem Klebstoffauftrag
sur les deux faces (IEC 60454-3-19:2003)
(CEI 60454-3-19:2003)



This European Standard was approved by CENELEC on 2003-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60454-3-19:2003 E

---------------------- Page: 2 ----------------------

EN 60454-3-19:2003 - 2 -
Foreword
The text of document 15C/1475/FDIS, future edition 1 of IEC 60454-3-19, prepared by SC 15C,
Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60454-3-19 on 2003-07-01.

The following dates were fixed:

– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-04-01

– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-07-01

Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________

Endorsement notice

The text of the International Standard IEC 60454-3-19:2003 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60454-3-19:2003
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60426 1973 Test methods for determining - -
e
...