EN 62148-17:2014
(Main)Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors
Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors
IEC 62148-17:2013 covers physical interface specification of transmitter and receiver components with dual coaxial RF connectors. Keywords: interface specification, transmitter and receiver components, dual coaxial RF connectors.
Aktive Lichtwellenleiterbauelemente und -geräte – Gehäuse- und Schnittstellennormen – Teil 17: Sende- und Empfangsbauteile mit dualen HF-Koaxialsteckverbindern
Composants et dispositifs actifs à fibres optiques – Normes de boitiers et d’interface – Partie 17: Composants émetteurs et récepteurs munis de connecteurs coaxiaux RF doubles
La CEI 62148-17:2013 concerne la spécification de l'interface physique des composants émetteurs et récepteurs munis de connecteurs coaxiaux RF doubles. Mots clés: spécification de l'interface, composants émetteurs et récepteurs, connecteurs coaxiaux RF doubles.
Aktivne komponente in naprave optičnih vlaken - Standardi za okrove in vmesnike - 17. del: Oddajniške in sprejemniške komponente z dvojnimi koaksialnimi radiofrekvenčnimi (RF) konektorji (IEC 62148-17:2013)
Ta del standarda IEC 62148 zajema specifikacije fizičnega vmesnika oddajniških in sprejemniških komponent z dvojnimi koksialnimi radiofrekvenčnimi (RF) konektorji.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2014
$NWLYQHNRPSRQHQWHLQQDSUDYHRSWLþQLKYODNHQ6WDQGDUGL]DRNURYHLQYPHVQLNH
GHO 2GGDMQLãNHLQVSUHMHPQLãNHNRPSRQHQWH]GYRMQLPLNRDNVLDOQLPL
UDGLRIUHNYHQþQLPL 5) NRQHNWRUML ,(&
Fiber optic active components and devices - Package and interface standards - Part 17:
Transmitter and receiver components with dual coaxial RF connectors
Ta slovenski standard je istoveten z: EN 62148-17:2014
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 62148-17
NORME EUROPÉENNE
March 2014
EUROPÄISCHE NORM
ICS 33.180.99
English version
Fiber optic active components and devices -
Package and interface standards -
Part 17: Transmitter and receiver components with dual coaxial RF
connectors
(IEC 62148-17:2013)
Composants et dispositifs actifs à fibres Aktive Lichtwellenleiterbauelemente und -
optiques – Normes de boitiers et geräte – Gehäuse- und
d’interface – Partie 17: Composants Schnittstellennormen – Teil 17: Sende-
émetteurs et récepteurs munis de und Empfangsbauteile mit dualen HF-
connecteurs coaxiaux RF doubles Koaxialsteckverbindern
(CEI 62148-17:2013) (IEC 62148-17:2013)
This European Standard was approved by CENELEC on 2013-10-30. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62148-17:2014 E
Foreword
The text of document 86C/1165/FDIS, future edition 1 of IEC 62148-17, prepared by SC 86C, "Fibre optic
systems and active devices", of IEC TC 86, "Fibre optics" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 62148-17:2014.
The following dates are fixed:
(dop) 2014-09-21
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-10-30
standards conflicting with the
document have to be withdrawn
This standard is to be read in conjunction with EN 62148-1.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62148-17:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60191 (all parts) NOTE Harmonized as EN 60191 (all parts).
IEC 60825-1 NOTE Harmonized as EN 60825-1.
IEC 60825-2 NOTE Harmonized as EN 60825-2.
IEC 61281-1 NOTE Harmonized as EN 61281-1.
IEC 62007-1 NOTE Harmonized as EN 62007-1.
IEC 62007-2 NOTE Harmonized as EN 62007-2.
ISO 1101 NOTE Harmonized as EN ISO 1101.
- 3 - EN 62148-17:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC Guide 107 Electromagnetic compatibility - Guide to the - -
drafting of electromagnetic compatibility
publications
IEC 60793-2-50 Optical fibres - Part 2-50: Product EN 60793-2-50
specifications - Sectional specification for
class B single-mode fibres
IEC 60874-1 Fibre optic interconnecting devices and EN 60874-1
passive components - Connectors for optical
fibres and cables - Part 1: Generic
specification
IEC 62148-1 Fibre optic active components and devices - EN 62148-1
Package and interface standards - Part 1:
General and guidance
IEC 62148-17 ®
Edition 1.0 2013-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Package and interface standards –
Part 17: Transmitter and receiver components with dual coaxial RF connectors
Composants et dispositifs actifs à fibres optiques – Normes de boitiers et
d’interface –
Partie 17: Composants émetteurs et récepteurs munis de connecteurs coaxiaux
RF doubles
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX N
ICS 33.180.99 ISBN 978-2-8322-1108-3
– 2 – 62148-17 © IEC:2013
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Abbreviations . 5
4 Electromagnetic compatibility (EMC) requirements . 5
5 Classification . 6
6 Specification of transmitter component with dual coaxial RF connectors . 6
6.1 General . 6
6.2 Pigtail interface . 6
6.3 Electrical interface . 6
6.3.1 General . 6
6.3.2 Numbering of electrical terminals . 6
6.3.3 Coaxial connector . 7
6.3.4 Electrical terminal assignment . 7
6.4 Package outline and footprint . 8
6.4.1 Drawing of package outline . 8
6.4.2 Drawing of footprint . 10
7 Specification of receiver component with dual coaxial RF connectors . 10
7.1 General . 10
7.2 Pigtail interface . 11
7.3 Electrical interface . 11
7.3.1 General . 11
7.3.2 Numbering of electrical terminals . 11
7.3.3 Coaxial connector . 11
7.3.4 Electrical terminal assignment . 11
7.4 Package outline and footprint . 12
7.4.1 Drawing of package outline . 12
7.4.2 Drawing of footprint . 13
Bibliography . 15
Figure 1 – Electrical terminal numbering assignments for transmitter component with
dual coaxial RF connectors . 6
Figure 2 – Coaxial RF connector interface . 7
Figure 3 – Package outline drawing . 9
Figure 4 – Recommended pattern layout for the PCB . 10
Figure 5 – Electrical terminal numbering assignments for receiver component with dual
coaxial RF connectors . 11
Figure 6 – Package outline . 13
Figure 7 – Recommended pattern layout for the PCB . 14
Table 1 – Terminal function definitions . 8
Table 2 – Terminal function definitions . 12
62148-17 © IEC:2013 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PACKAGE AND INTERFACE STANDARDS –
Part 17: Transmitter and receiver components
with dual coaxial RF connectors
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC Nat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.