EN 61386-1:2004
(Main)Conduit systems for cable management - Part 1: General requirements
Conduit systems for cable management - Part 1: General requirements
Specifies requirements and tests for conduit systems, including conduits and conduit fittings, for the protection and management of insulated conductors and/or cables in electrical installations or in communication systems up to 1 000 V a.c. and/or 1 500 V d.c.
Elektroinstallationsrohrsysteme für elektrische Energie und für Informationen - Teil 1: Allgemeine Anforderungen
Systèmes de conduits pour la gestion du câblage - Partie 1: Règles générales
La première partie de la CEI 1386 spécifie les règles et les essais applicables aux systèmes de conduits, incluant conduits et accessoires de conduits, pour la protection et le rangement des conducteurs et/ou des câbles isolés dans les installations électriques ou les systèmes de télécommunication jusqu'à 1 000 V c.a. et/ou 1 500 V c.c.
Sistemi kanalov za električne inštalacije – 1. del: Splošne zahteve (IEC 61386-1:1996 + A1:2000)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 61386-1:2004
STANDARD
september 2004
Sistemi kanalov za električne inštalacije – 1. del: Splošne zahteve (IEC 61386-
1:1996 + A1:2000)
Conduit systems for electrical installations - Part 1: General requirements (IEC
61386-1:1996 + A1:2000)
ICS 29.120.10 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 61386-1
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2004
ICS 29.120.10 Supersedes EN 50086-1:1993
English version
Conduit systems for electrical installations
Part 1: General requirements
(IEC 61386-1:1996 + A1:2000)
Systèmes de conduits pour installations Elektroinstallationsrohrsysteme für
électriques elektrische Energie und für Informationen
Partie 1: Règles générales Teil 1: Allgemeine Anforderungen
(CEI 61386-1:1996 + A1:2000) (IEC 61386-1:1996 + A1:2000)
This European Standard was approved by CENELEC on 2003-09-23. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61386-1:2004 E
Foreword
The text of the International Standard IEC 61386-1:1996 + A1:2000, prepared by SC 23A, Cable
management systems, of IEC TC 23, Electrical accessories, was submitted to the Unique Acceptance
Procedure and was approved by CENELEC as EN 61386-1 on 2003-09-23.
This European Standard supersedes EN 50086-1:1993 + corrigendum February 2001.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2004-10-01
national standard or by endorsement
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) –
This part 1 of EN 61386 is to be used in conjunction with the appropriate part 2, which contains
clauses to supplement or modify the corresponding clauses in part 1, to provide the relevant particular
requirements for each type of product. A conduit system which conforms to this standard is deemed
safe for use.
In this standard, the following print types are used:
- requirements: in roman type;
- test specifications: in italic type;
- explanatory matter: in smaller roman type.
Annexes ZA and ZB have been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61386-1:1996 + A1:2000 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 61386-1:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60417 1973 Graphical symbols for use on equipment - HD 243 S12 1995
Index, survey and compilation of the
single sheets
IEC 60423 (mod) 1993 Conduits for electrical purposes - Outside EN 60423 1994
diameters of conduits for electrical
installations and threads for conduits and
fittings
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code) + corr. May 1993
IEC 60670 1989 General requirements for enclosures for - -
accessories for household and similar
fixed electrical installations
2)
IEC 60695-2-1/1 1994 Fire hazard testing EN 60695-2-1/1 1996
Part 2: Test methods –
Section 1/sheet 1: Glow-wire end-product
test and guidance
3)
IEC 60695-2-4/1 1991 Part 2: Test methods – EN 60695-2-4/1 1993
Section 4/sheet 1: 1 kW nominal
pre-mixed test flame and guidance
___________
1)
IEC 60417:1973 and its supplements are superseded by the IEC 60417 database, which is to be used instead.
2)
EN 60695-2-1/1:1996 is superseded by EN 60695-2-11:2001, which is based on IEC 60695-2-11:2000.
3)
EN 60695-2-4/1:1993 is superseded by EN 60695-11-2:2003, which is based on IEC 60695-11-2:2003.
Annex ZB
(informative)
Tests to be carried out for conduit systems
complying with EN 50086-1:1993
This annex contains the following additional tests which are necessary to be carried out on conduit
systems already complying with EN 50086-1:1993 in order for them to be declared to meet the
requirements of EN 61386–1:2003.
10.3 Impact test
NOTE The test has to be carried out because the compliance after the test has to be checked with a gauge.
13.1.3.2 Test with 1kW flame
NOTE The test has to be carried out because the combustion has been expanded to include flaming or glowing.
___________
NORME
CEI
INTERNATIONALE
IEC
1386-1
INTERNATIONAL
Première édition
STANDARD
First edition
1996-11
Systèmes de conduits pour installations
électriques –
Partie 1:
Règles générales
Conduit systems for electrical installations –
Part 1:
General requirements
CEI 1996 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized
utilisée sous quelque forme que ce soit et par aucun procédé, in any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission
microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher
Bureau central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève, Suisse
CODE PRIX
Commission Electrotechnique Internationale
V
International Electrotechnical Commission PRICE CODE
Pour prix, voir catalogue en vigueur
For price, see current catalogue
1386-1 IEC:1996 – 3 –
CONTENTS
Page
FOREWORD . 5
Clause
1 Scope . 7
2 Normative references . 7
3 Definitions. 7
4 General requirements. 11
5 General conditions for tests . 11
6 Classification. 13
7 Marking and documentation. 17
8 Dimensions . 19
9 Construction. 19
10 Mechanical properties . 23
11 Electrical properties. 31
12 Thermal properties . 35
13 Fire effects. 41
14 External influences. 41
15 Electromagnetic compatibility . 45
Figures
1 Arrangement for compression test . 46
2 Impact test apparatus. 47
3 Assembly of conduit and conduit fittings for bonding test. 48
4 Arrangement for insulation resistance and electric strength test – Rigid conduit. 49
5 Arrangement for insulation resistance and electric strength test – Pliable
and flexible conduit . 50
6 Enclosure for burning test. 51
7 Arrangement for burning test . 52
8 Test apparatus for burning resistance to heat . 53
Annex A – Classification coding for conduit systems . 63
1386-1 IEC:1996 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
__________
CONDUIT SYSTEMS FOR ELECTRICAL INSTALLATIONS –
Part 1: General requirements
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international co-operation on all questions concerning standardization in the electrical and electronic
fields. To this end and in addition to other activities, the IEC publishes International Standards. Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt
with may participate in this preparatory work. International, governmental and non-governmental organizations
liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the
form of standards, technical reports or guides and they are accepted by the National Committees in that
sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the
subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 1386-1 has been prepared by subcommittee 23A: Cable
management systems, of IEC technical committee 23: Electrical accessories.
The text of this standard is based on the following documents:
FDIS Report on voting
23A/260/FDIS 23A/274/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This part 1 is to be used in conjunction with the appropriate part 2, which contains clauses to
supplement or modify the corresponding clauses in part 1, to provide the relevant particular
requirements for each type of product. A conduit system which conforms to this standard is
deemed safe for use.
In this publication, the following print types are used:
– Requirements proper: in roman type.
– Test specifications: in italic type.
– Explanatory matter: in smaller roman type.
Annex A is an integral part of this standard.
1386-1 IEC:1996 – 7 –
CONDUIT SYSTEMS FOR ELECTRICAL INSTALLATIONS –
Part 1: General requirements
1 Scope
This part of IEC 1386 specifies requirements and tests for conduit systems, including conduits
and conduit fittings, for the protection and management of insulated conductors and/or cables
in electrical installations or in communication systems up to 1000 V a.c. and/or 1500 V d.c. This
standard applies to metallic, non-metallic and composite conduit systems, including threaded
and non-threaded entries which terminate the system. This standard does not apply to
enclosures and connecting boxes which come within the scope of IEC 670.
NOTES
1 Certain conduit systems may also be suitable for use in hazardous atmospheres. Regard should then be
taken of the extra requirements necessary for equipment to be installed in such conditions.
2 Earthing conductors may or may not be insulated.
2 Normative references
The f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.