Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode

This part of IEC 61300 describes a test to quantitatively assess the capability of connector terminated patchcord cable assemblies to withstand static loads without uncoupling of the connector, physical damage to the assembly or permanent degradation of optical performance. This test is intended to apply to terminated reinforced jacketed cable of any diameter, both singlemode and multimode.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-50: Prüfungen - Festigkeitsprüfung für Lichtwellenleiter-Steckverbinder - Einmoden und Mehrmoden

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-50: Essais - Essai de résistance des connecteurs à fibres optiques sous charge statique - Unimodal et multimodal

La présente partie de la CEI 61300 décrit un essai destiné à évaluer de façon quantitative la capacité d'un cordon, assemblage d'un câble muni de connecteurs, à supporter des charges statiques sans désaccouplage du connecteur, sans détérioration physique de l'ensemble, et sans dégradation permanente des performances optiques. Cet essai est destiné à être appliqué aux câbles de tout diamètre, terminés par gaine renforcée, à la fois unimodaux et multimodaux.

Osnovno preskušanje in merilni postopki - 2-50. del: Preskusi - Preskus preverjanja konektorjev za optične kable - Enorodni in večrodni (IEC 61300-2-50:2007)

General Information

Status
Published
Publication Date
02-Aug-2007
Withdrawal Date
30-Jun-2010
Current Stage
6060 - Document made available - Publishing
Start Date
03-Aug-2007
Completion Date
03-Aug-2007

Relations

Buy Standard

Standard
EN 61300-2-50:2007
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-50:2007
01-december-2007
2VQRYQRSUHVNXãDQMHLQPHULOQLSRVWRSNL±GHO3UHVNXVL±3UHVNXV
SUHYHUMDQMDNRQHNWRUMHY]DRSWLþQHNDEOH±(QRURGQLLQYHþURGQL ,(&

Basic test and measurement procedures -- Part 2-50: Tests - Fibre optic connector proof
test - singlemode and multimode (IEC 61300-2-50:2007)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-50: Prüfungen - Festigkeitsprüfung für Lichtwellenleiter-
Steckverbinder - Einmoden und Mehrmoden (IEC 61300-2-50:2007)
Dispositifs d'interconnexion et composants passifs a fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 2-50: Essais - Essai de résistance des
connecteurs a fibres optiques sous charge statique - Unimodal et multimodal (IEC 61300
-2-50:2007)
Ta slovenski standard je istoveten z: EN 61300-2-50:2007
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-50:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61300-2-50

NORME EUROPÉENNE
August 2007
EUROPÄISCHE NORM

ICS 33.180.20


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-50: Tests -
Fibre optic connector proof test with static load -
Singlemode and multimode
(IEC 61300-2-50:2007)

Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Méthodes fondamentales d'essais und passive Bauteile -
et de mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-50: Essais - Teil 2-50: Prüfungen -
Essai de résistance des connecteurs Festigkeitsprüfung
à fibres optiques sous charge statique - für Lichtwellenleiter-Steckverbinder -
Unimodal et multimodal Einmoden und Mehrmoden
(CEI 61300-2-50:2007) (IEC 61300-2-50:2007)


This European Standard was approved by CENELEC on 2007-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-50:2007 E

---------------------- Page: 2 ----------------------

EN 61300-2-50:2007 - 2 -
Foreword
The text of document 86B/2509/FDIS, future edition 1 of IEC 61300-2-50, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-50 on 2007-07-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-07-01
Annex ZA has been added by CENELEC.
__________
Notice
This document contains material that is Copyright © 2006, Telcordia Technologies, Inc. ("Telcordia").
All rights reserved.
The reader is advised that this IEC document and Telcordia source(s) may differ, and the context and use
of said material in this IEC document may differ from that of Telcordia. Telcordia makes no representation
or warranty, express or implied, with respect to the sufficiency, accuracy, or utility of any information or
opinion contained herein. Any use of or reliance upon said information or opinion is at the risk of the user.
Telcordia shall not be liable for any damage or injury incurred by any person arising out of the sufficiency,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.