EN 60603-2:1998/A1:2005
(Amendment)Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
D114/118: CLC/TC 48B disbanded
Steckverbinder für gedruckte Schaltungen für Frequenzen unter 3 MHz - Teil 2: Bauartspezifikation für qualitätsbewertete indirekte Steckverbinder für gedruckte Schaltungen, Rastermaß 2,54 mm (0,1 in), mit gemeinsamen Einbaumerkmalen
Connecteurs pour fréquences inférieures à 3 MHz pour utilisation avec cartes imprimées - Partie 2: Spécification particulière pour connecteurs en deux parties pour cartes imprimées, avec assurance de la qualité, pour grilles de base de 2,54 mm (0,1 in) avec caractéristiques de montage communes
Konektorji za frekvence, nižje od 3 MHz, za uporabo na tiskanih vezjih – 2. del: Podrobna specifikacija za dvodelne konektorje z ocenjeno kakovostjo za tiskana vezja za osnovno mrežo 2,54 mm (0,1 in) s splošnimi lastnostmi za namestitev (IEC 60603-2:1995/A1:2000)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60603-2:2002/A1:2005
STANDARD
december 2005
Konektorji za frekvence, nižje od 3 MHz, za uporabo na tiskanih vezjih – 2. del:
Podrobna specifikacija za dvodelne konektorje z ocenjeno kakovostjo za
tiskana vezja za osnovno mrežo 2,54 mm (0,1 in) s splošnimi lastnostmi za
namestitev (IEC 60603-2:1995/A1:2000)
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail
specification for two-part connectors with assessed quality, for printed boards, for
basic grid of 2,54 mm (0,1 in) with common mounting features (IEC 60603-
2:1995/A1:2000)
ICS 31.220.10 Referenčna številka
SIST EN 60603-2:2002/A1:2005(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60603-2/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2005
ICS 31.220.10
English version
Connectors for frequencies below 3 MHz for use with printed boards
Part 2: Detail specification for two-part connectors with assessed quality,
for printed boards, for basic grid of 2,54 mm (0,1 in)
with common mounting features
(IEC 60603-2:1995/A1:2000)
Connecteurs pour fréquences inférieures Steckverbinder für gedruckte Schaltungen
à 3 MHz pour utilisation für Frequenzen unter 3 MHz
avec cartes imprimées Teil 2: Bauartspezifikation für
Partie 2: Spécification particulière pour qualitätsbewertete indirekte
connecteurs en deux parties pour cartes Steckverbinder für gedruckte
imprimées, avec assurance de la qualité, Schaltungen, Rastermaß 2,54 mm
pour grilles de base de 2,54 mm (0,1 in) (0,1 in), mit gemeinsamen
avec caractéristiques de montage Einbaumerkmalen
communes (IEC 60603-2:1995/A1:2000)
(CEI 60603-2:1995/A1:2000)
This amendment A1 modifies the European Standard EN 60603-2:1998; it was approved by CENELEC
on 2005-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.