iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 62841-4-3:2021/A11:2021

(Amendment)

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers

DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
2020-07-15: common mod, no xml

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 4-3: Besondere Anforderungen für personengeführte Rasenmäher

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 4-3: Exigences particulières pour tondeuses à gazon à conducteur à pied

No scope available

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-3. del: Posebne zahteve za ročno vodene vrtne kosilnice - Dopolnilo A11

General Information

Status
Published
Publication Date
05-Aug-2021
ICS
65.060.70 - Horticultural equipment
Technical Committee
CLC/TC 116 - Safety of hand-held motor-operated electric tools
Drafting Committee
CLC/TC 116 - Safety of hand-held motor-operated electric tools
Current Stage
6060 - Document made available - Publishing
Start Date
06-Aug-2021
Due Date
14-Dec-2021
Completion Date
06-Aug-2021
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN IEC 62841-4-3:2021/A11:2021 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers

Relations

Amends
EN IEC 62841-4-3:2021 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers
Effective Date
02-Oct-2018

Buy Standard

EN IEC 62841-4-3:2021/A11:2021EN IEC 62841-4-3:2021/A11:2021
PreviousNext
Amendment
EN IEC 62841-4-3:2021/A11:2021
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62841-4-3:2021/A11:2021
01-november-2021
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-
3. del: Posebne zahteve za ročno vodene vrtne kosilnice - Dopolnilo A11
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-
behind lawnmowers
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 4-3: Besondere Anforderungen für
handgeführte Rasenmäher
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 4-3: Exigences particulières pour tondeuses à gazon à conducteur à
pied
Ta slovenski standard je istoveten z: EN IEC 62841-4-3:2021/A11:2021
ICS:
25.140.20 Električna orodja Electric tools
65.060.70 Vrtnarska oprema Horticultural equipment
SIST EN IEC 62841-4-3:2021/A11:2021 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62841-4-3:2021/A11:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 62841-4-3:2021/A11:2021


EUROPEAN STANDARD EN IEC 62841-4-3:2021/A11

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2021
ICS 65.060.70

English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 4-3: Particular
requirements for pedestrian controlled walk-behind lawnmowers
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 4-3: Exigences transportable Werkzeuge und Rasen- und
particulières pour tondeuses à gazon à conducteur à pied Gartenmaschinen - Sicherheit - Teil 4-3: Besondere
Anforderungen für handgeführte Rasenmäher
This amendment A11 modifies the European Standard EN IEC 62841-4-3:2021; it was approved by CENELEC on 2021-05-31. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62841-4-3:2021/A11:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62841-4-3:2021/A11:2021
EN IEC 62841-4-3:2021/A11:2021

Contents
European foreword .3
1 Modification to Clause 1, “Scope” .5
2 Modification to Clause 2, “Normative references” .5
3 Modifications to Clause 8, “Marking and instructions” .5
4 Modification to Clause 18, “Abnormal operation” .6
5 Modifications to Clause 19, “Mechanical hazards” .7
6 Modification to Clause 20, “Mechanical strength” .7
7 Modifications to Annex I, “Measurement of noise and vibration emissions” .7
8 Modifications to Annex K, “Battery tools and battery packs” .7
9 Modifications to Annex L, “Battery tools and battery packs provided with mains co
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62841-4-3:2021(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers
SIST EN IEC 62841-4-3:2021

IEC 62841-4-3:2020 This document applies to the design of pedestrian controlled walk-behind - cylinder lawnmowers; and - rotary lawnmowers equipped with - metallic cutting means; and/or - rigid non-metallic cutting means; and/or - non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of greater than 10 J. This document does not apply to - robotic lawnmowers; - remote-controlled lawnmowers; - flail mowers or flail-type attachments; - scissors type lawnmowers; - grassland mowers; - sickle bar mowers; - towed/semi-mounted grass-cutting machines; - scrub-clearing machines; - lawn trimmers and lawn edge trimmers; - lawn edgers; - grass trimmers; - brush cutters; - brush saws; - agricultural mowers; - trailing seat/sulky units; - ride-on machines; - non-powered lawnmowers; - combustion engine powered lawnmowers; - hybrid and fuel cell powered machines and associated charging systems; and - garden tractors or their attachments. Robotic lawnmowers are covered by IEC 60335-2-107, and will be covered by a future part of IEC 62841.

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50636-2-107:2015/A3:2021(Amendment)
Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers
SIST EN 50636-2-107:2015/A3:2021

This European Standard specifies safety requirements and their verification for the design and construction of robotic battery powered electrical rotary lawnmowers and their peripherals with the rated voltage of the battery being not more than 75 V d.c. charged by mains electrical and/or alternative energies, e.g. solar power.

  • Amendment
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50636-2-107:2015/A2:2020(Amendment)
Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers
SIST EN 50636-2-107:2015/A2:2020

This European Standard specifies safety requirements and their verification for the design and construction of robotic battery powered electrical rotary lawnmowers and their peripherals with the rated voltage of the battery being not more than 75 V d.c. charged by mains electrical and/or alternative energies, e.g. solar power.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50636-2-107:2015/A1:2018(Amendment)
Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers
SIST EN 50636-2-107:2015/A1:2018

This clause of Part 1 is replaced by the following: This European Standard specifies safety requirements and their verification for the design and construction of robotic battery powered electrical rotary lawnmowers and their peripherals with the rated voltage of the battery being not more than 75 V d.c. charged by mains electrical and/or alternative energies, e.g. solar power. This European Standard does not apply to non-robotic machines such as lawn trimmers, lawn edge trimmers, lawn edgers, ride-on lawnmowers or pedestrian controlled lawnmowers. This European Standard is not applicable to EMC and environmental hazards (except noise). This European Standard does not apply to internal combustion engine(s), hybrid and fuel cell powered machines and associated charging systems. This European Standard deals with all the significant hazards presented by battery powered robotic lawnmowers and their peripherals when they are used as intended and under conditions of misuse which are reasonably foreseeable. This European Standard is not applicable to machines, which are manufactured before the date of publication of this document by CENELEC. NOTE This European Standard does not apply to battery chargers (EN 60335-2-29:2004).

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50636-2-107:2015(Main)
Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers
SIST EN 50636-2-107:2015

This clause of Part 1 is replaced by the following: This European Standard specifies safety requirements and their verification for the design and construction of robotic battery powered electrical rotary lawnmowers and their peripherals with the rated voltage of the battery being not more than 75 V d.c. charged by mains electrical and/or alternative energies, e.g. solar power. This European Standard does not apply to non-robotic machines such as lawn trimmers, lawn edge trimmers, lawn edgers, ride-on lawnmowers or pedestrian controlled lawnmowers. This European Standard is not applicable to EMC and environmental hazards (except noise). This European Standard does not apply to internal combustion engine(s), hybrid and fuel cell powered machines and associated charging systems. This European Standard deals with all the significant hazards presented by battery powered robotic lawnmowers and their peripherals when they are used as intended and under conditions of misuse which are reasonably foreseeable. This European Standard is not applicable to machines, which are manufactured before the date of publication of this document by CENELEC. NOTE This European Standard does not apply to battery chargers (EN 60335-2-29:2004).

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50636-2-100:2014(Main)
Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
SIST EN 50636-2-100:2015

Replacement: This European Standard specifies the safety requirements and their verification for the design and construction of hand-held mains-operated electrical garden vacuums, and garden blower/vacuums with or without shredding means and garden blowers, hereinafter referred to as machine(s), for use at and around the home or for similar purposes, their rated voltage being not more than 250 V single phase. This European Standard does not apply to: - machines powered by combustion engines; NOTE 1 Combustion engine driven machines are covered by EN 15503. - machines driven by an external power source; - machines powered from a 3 phase supply; - vacuum cleaners intended primarily for use indoors, for water suction cleaning or animal grooming; NOTE 2 EN 60335-2-2 deals with this type of machine. - walk-behind, hand-guided (support-wheeled) and ride-on machines; - combination of a mains driven and/or battery powered blowers and vacuums with internal combustion engines (hybrid); - back-pack powered blowers and back-pack powered vacuums. EMC and environmental aspects, except noise, have not been considered in this standard. This European Standard deals with all the significant hazards presented by hand-held mains-operated electrical garden vacuums, garden blower/vacuums with or without shredding means and garden blowers when they are used as intended and under conditions of misuse which are reasonably foreseeable. This European Standard is not applicable to machines, which are manufactured before the date of publication of this document by CENELEC.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50636-2-94:2014(Main)
Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears
SIST EN 50636-2-94:2015

This clause of Part 1 is replaced by the following. This European Standard specifies safety requirements and their verification for the design and construction of electric powered hand-held scissors type grass shears with a maximum cutting width of 200 mm designed primarily for cutting grass, their rated voltage being not more than 250 V for a.c. or 75 V d.c. In this European Standard the term “machine” means “electric powered scissors type grass shear”. This European Standard does not apply to hedge trimmers as covered by EN 60745–2–15. Requirements for chargers are covered by EN 60335-2-29:2004. Requirements for batteries are covered by EN 62133:2003. EMC and environmental aspects except for noise have not been considered in this European Standard. This European Standard deals with all the significant hazards presented by hand-held scissors type grass shears when they are used as intended and under conditions of misuse which are reasonably foreseeable.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50636-2-91:2014(Main)
Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
SIST EN 50636-2-91:2015

This clause of Part 1 is replaced by the following. This European Standard specifies safety requirements and their verification for the design and construction of electric powered walk-behind and hand-held lawn trimmers and lawn edge trimmers, with cutting element(s) of non metallic filament line or freely pivoting non-metallic cutter(s), with a kinetic energy of not more than 10 J each, used by a standing operator for cutting grass, their rated voltage being not more than 250 V for a.c. or 75 V d.c.. NOTE 101 The method of calculating the kinetic energy for the purposes of this standard is given in 22.103. In this European Standard, hand-held and walk-behind lawn trimmers and lawn edge trimmers are referred to collectively as machine(s). This European Standard does not apply to - scissor type or lawn trimmers and lawn edge trimmers with cutting means other than those described above; - lawn trimmers and lawn edge trimmers with collecting devices; - self-propelled lawn trimmers or lawn edge trimmers; EMC and environmental aspects, except noise, have not been considered in this European Standard. This European Standard does not apply to chargers as covered by EN 60335-2-29. This European Standard does not apply to batteries as covered by EN 62133. This European Standard deals with all the significant hazards presented by hand-held and walk-behind lawn trimmers and lawn edge trimmers when they are used as intended and under conditions of misuse which are reasonably foreseeable.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50636-2-92:2014(Main)
Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
SIST EN 50636-2-92:2015

Deals with the safety of pedestrian-controlled mains-operated electric lawn scarifiers and aerators. These scarifiers have rotating cutters for regenerating lawns by, for instance, combing out grass thatch and moss, or by cutting vertically into the lawn face. These scarifiers are designed primarily for home use, with a rated voltage not more than 250 V single phase. For lawnmowers, see IEC 60335-2-77; for lawn trimmers, see IEC 60335-2-91. The contents of the corrigendum of May 2003 have been included in this copy.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50434:2014(Main)
Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers
SIST EN 50434:2015

This European Standard specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with integral electric motor, not exceeding 250 V single phase, with or without vacuum assisted collection which are designed to reduce organic material to smaller pieces and are used in a stationary position by an operator standing on the ground. This standard applies to shredders/chippers with feed intake openings or segments, in this standard referred to as feed safety openings that in total will fit into a square of 250 mm x 250 mm. NOTE For the requirements for the measurement of the square of 250 mm x 250 mm are given in clause 20.101.1 of this standard. In this European Standard shredders and chippers are referred to collectively as machine(s). This European Standard does not cover requirements for – machines powered by combustion engines; NOTE 1 Combustion engine driven machines are covered by EN 13683. – machines driven by an external power source or by battery power; – machines with powered discharge intended to broadcast material or load vehicles; – machines with mechanically powered feed intake or attachments; – wood chippers for agricultural, lawn and park and forestry use; NOTE 2 Wood chippers are covered by EN 13525. – machines powered from a 3 phase supply. This European Standard deals with all significant hazards presented by shredders/chippers when they are used as intended and under conditions of misuse which are reasonably foreseeable. EMC and environmental aspects, except noise, have not been considered in this European Standard. This European Standard is not applicable to machines which are manufactured before the date of publication of this document by CENELEC.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day