iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61131-7:2000

(Main)

Programmable controllers - Part 7: Fuzzy control programming

Programmable controllers - Part 7: Fuzzy control programming

Defines a language for the programming of Fuzzy Control applications used by programmable controllers.

Speicherprogrammierbare Steuerungen - Teil 7: Fuzzy-Control-Programmierung

Automates programmables - Partie 7: Programmation en logique floue

Définit un langage permettant de programmer des appli-cations de contrôle flou pour automates programmables.

Programmable controllers - Part 7: Fuzzy control programming

General Information

Status
Published
Publication Date
06-Dec-2000
Withdrawal Date
31-Oct-2003
ICS
25.040.40 - Industrial process measurement and control
35.240.50 - IT applications in industry
Technical Committee
CLC/TC 65X - Industrial-process measurement, control and automation
Drafting Committee
IEC/SC 65B - IEC_SC_65B
Parallel Committee
IEC/SC 65B - IEC_SC_65B
Current Stage
6060 - Document made available - Publishing
Start Date
07-Dec-2000
Completion Date
07-Dec-2000
Ref Project
SIST EN 61131-7:2002 - Programmable controllers -- Part 7: Fuzzy control programming

Buy Standard

EN 61131-7:2002EN 61131-7:2002
PreviousNext
Standard
EN 61131-7:2002
English language
57 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Programmable controllers - Part 7: Fuzzy control programmingSpeicherprogrammierbare Steuerungen -- Teil 7: Fuzzy-Control-ProgrammierungAutomates programmables -- Partie 7: Programmation en logique floueProgrammable controllers -- Part 7: Fuzzy control programming35.240.50Uporabniške rešitve IT v industrijiIT applications in industry25.040.40Merjenje in krmiljenje industrijskih postopkovIndustrial process measurement and controlICS:Ta slovenski standard je istoveten z:EN 61131-7:2000SIST EN 61131-7:2002en01-september-2002SIST EN 61131-7:2002SLOVENSKI
STANDARD



SIST EN 61131-7:2002



SIST EN 61131-7:2002



SIST EN 61131-7:2002



SIST EN 61131-7:2002



SIST EN 61131-7:2002



SIST EN 61131-7:2002



SIST EN 61131-7:2002



SIST EN 61131-7:2002



SIST EN 61131-7:2002



SIST EN 61131-7:2002



SIST EN 61131-7:2002



SIST EN 61131-7:2002



SIST EN 61131-7:2002



SIST EN 61131-7:2002



SIST EN 61131-7:2002
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62769-150-1:2023(Main)
Field device integration (FDI)® - Part 150-1: Profiles - ISA100
SIST EN IEC 62769-150-1:2023

IEC 62769-150-1:2023 is available as IEC 62769-150-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-150-1:2023 specifies an FDI profile of IEC 62769 for IEC 62734 (ISA100.11a)[1]. [1] ISA100 WIRELESSTM is a trade name of the non-profit consortium Wireless Compliance Institute. This information is given for the convenience of users of this standard and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61158-2:2023(Main)
Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
SIST EN IEC 61158-2:2024

IEC 61158-2:2023 is one of a series produced to facilitate the interconnection of automation system components. It is related to other standards in the set as defined by the "three-layer" fieldbus reference model described in IEC 61158‑1.

  • Standard
    546 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61918:2018/A12:2023(Amendment)
Industrial communication networks - Installation of communication networks in industrial premises
SIST EN IEC 61918:2019/A12:2023

This document specifies basic requirements for the installation of media for communication networks within and between the automation islands, of industrial sites. This standard covers balanced and optical fibre cabling. It also covers the cabling infrastructure for wireless media, but not the wireless media itself. Additional media are covered in the IEC 61784-5 series. This document is a companion standard to the communication networks of the industrial automation islands and especially to the communication networks specified in the IEC 61158 series and the IEC 61784 series. In addition, this document covers the connection between the generic telecommunications cabling specified in ISO/IEC 11801-3 and the specific communication cabling of an automation island, where an automation outlet (AO) replaces the telecommunication outlet (TO) of ISO/IEC 11801-3. NOTE If the interface used at the AO does not conform to that specified for the TO of ISO/IEC 11801-3, the cabling no longer conforms to ISO/IEC 11801-3 although certain features, including performance, of generic cabling may be retained. This document provides guidelines that cope with the critical aspects of the industrial automation area (safety, security and environmental aspects such as mechanical, liquid, particulate, climatic, chemicals and electromagnetic interference). This document does not recognise implementations of power distribution with or through Ethernet balanced cabling systems that are not specified in IEEE 802.3af and in IEEE 802.3at. This document deals with the roles of planner, installer, verifier, and acceptance test personnel, administration and maintenance personnel and specifies the relevant responsibilities and/or gives guidance.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62714-2:2022(Main)
Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 2: Semantics libraries
SIST EN IEC 62714-2:2023

The IEC 62714 series specifies an engineering data exchange format for use in industrial automation systems. This part of IEC 62714 specifies normative as well as informative AML libraries for the modelling of engineering information for the exchange between engineering tools in the plant automation area by means of AML. Moreover, it presents additional user defined libraries as an example. Its provisions apply to the export/import applications of related tools. This part of IEC 62714 specifies AML role class libraries and AML attribute type libraries. Role classes provide semantics to AML objects, attribute types provide semantics to AML attributes. The association of role classes to AML objects or attribute types to AML attributes represent the possibility to add (also external) semantic to it. By associating a role class to an AML object or an attribute type to an AML attribute,it gets a semantic.This part of IEC 62714 does not define details of the data exchange procedure or implementation requirements for the import/export tools.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61131-9:2022(Main)
Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI)
SIST EN IEC 61131-9:2022

This part of IEC 61131 specifies a single-drop digital communication interface technology for small sensors and actuators SDCI (commonly known as IO-LinkTM2), which extends the traditional digital input and digital output interfaces as defined in IEC 61131-2 towards a point-to-point communication link. This technology enables the transfer of parameters to Devices and the delivery of diagnostic information from the Devices to the automation system. This technology is mainly intended for use with simple sensors and actuators in factory automation, which include small and cost-effective microcontrollers. This part specifies the SDCI communication services and protocol (physical layer, data link layer and application layer in accordance with the ISO/OSI reference model) for both SDCI Masters and Devices. This part also includes EMC test requirements. This part does not cover communication interfaces or systems incorporating multiple point or multiple drop linkages, or integration of SDCI into higher level systems such as fieldbuses.

  • Standard
    333 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61918:2018/A1:2022(Amendment)
Industrial communication networks - Installation of communication networks in industrial premises
SIST EN IEC 61918:2019/A1:2022

No scope available

  • Amendment
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62769-150-1:2021(Main)
Field device integration (FDI) - Part 150-1: Profiles - ISA100 WIRELESS
SIST EN 62769-150-1:2021

This part of IEC 62769 specifies an FDI profile for IEC 62734 (ISA100 WIRELESS).

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61804-4:2020(Main)
Devices and integration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 4: EDD interpretation
SIST EN IEC 61804-4:2020

IEC 61804-4:2020 specifies EDD interpretation for EDD applications and EDDs to support EDD interoperability. This document is intended to ensure that field device developers use the EDDL constructs consistently and that the EDD applications have the same interpretations of the EDD. It supplements the EDDL specification to promote EDDL application interoperability and improve EDD portability between EDDL applications. This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision. This edition was developed by merging material from multiple variants of existing EDDL specifications including those from FieldComm Group (Foundation™ Fieldbus , HART® ), PROFIBUS™ Nutzerorganisation e.V. (PNO), and ISA100_Wireless™ Compliance Institute (ISA100 WCI). When a profile deviation exists, it is now indicated in the context where the related deviation is found. As a result, the formatting and numbering of this edition may be different from any of the individual specifications from which this edition was derived. This edition includes the following significant technical changes with respect to the previous edition: • communication profiles ISA100 and GPE were added; • description of rules for optimized-column-width layout have been added; • description of the concatenation of labels and help was added; • color banding for meter type charts was added.

  • Standard
    142 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61804-5:2020(Main)
Devices and intergration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 5: EDDL Builtin library
SIST EN IEC 61804-5:2020

IEC 61804-5:2020 specifies the EDDL builtin library and provides the profiles of the various fieldbuses. This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision. This edition was developed by merging material from multiple variants of existing EDDL specifications including those from FieldComm Group (Foundation™ Fieldbus , HART® ), PROFIBUS™ Nutzerorganisation e.V. (PNO), and ISA100_Wireless™ Compliance Institute (ISA100 WCI). As a result, the formatting and numbering of this edition may be different from any of the individual specifications from which this edition was derived. This edition includes the following significant technical changes with respect to the previous edition: • Communication profiles ISA100 and GPE were added. • The following builtins have been deprecated: – ABORT_ON_NO_DEVICE – IGNORE_NO_DEVICE – RETRY_ON_NO_DEVICE – XMTR_ABORT_ON_NO_DEVICE – XMTR_IGNORE_NO_DEVICE – XMTR_RETRY_ON_NO_DEVICE – get_status_code_string

  • Standard
    282 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61804-3:2020(Main)
Devices and integration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 3: EDDL syntax and semantics
SIST EN IEC 61804-3:2020

IEC 61804-3:2020 specifies the electronic device description language (EDDL) technology, which enables the integration of real product details using the tools of the engineering life cycle. This document specifies EDDL as a generic language for describing the properties of automation system components. EDDL is capable of describing • device parameters and their dependencies; • device functions, for example, simulation mode, calibration; • graphical representations, for example, menus; • interactions with control devices; • graphical representations: – enhanced user interface, – graphing system; • persistent data store. EDDL is used to create electronic device description (EDD) for e.g. concrete devices, common usable profiles or libraries. This EDD is used with appropriate tools to generate an interpretative code to support parameter handling, operation, and monitoring of automation system components such as remote I/Os, controllers, sensors, and programmable controllers. Tool implementation is outside the scope of this document. This document specifies the semantic and lexical structure in a syntax-independent manner. A specific syntax is defined in Annex A, but it is possible to use the semantic model also with different syntaxes. IEC 61804-4 specifies EDD interpretation for EDD applications and EDDs to support EDD interoperability. IEC 61804-5 specifies the EDDL builtin library and provides the profiles of the various fieldbuses. This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision. This edition was developed by merging material from multiple variants of existing EDDL specifications including those from FieldComm Group (FOUNDATION™ Fieldbus , HART® ), PROFIBUS™ Nutzerorganisation e.V. (PNO), and ISA100_Wireless™ Compliance Institute (ISA100 WCI). Any places where there may be a profile deviation are now indicated in the context where the related deviation is found. As a result, the formatting and numbering of this edition may be different from any of the individual specifications from which this edition was derived. This edition includes the following significant technical changes with respect to the previous edition: • Communication profiles ISA100 and GPE were added. • EDD Identification Information has a new LAYOUT_TYPE attribute. • New construct SEMANTIC_MAP was added. • CLASS attribute values LOCAL_A and LOCAL_B were added. • Extended LIST functionality to support device managed lists.

  • Standard
    396 pages
    English language
    sale 10% off
    e-Library read for
    1 day