EN 50377-4-2:2011

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U

1.1 Product definition This European Standard contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a connector terminated with cylindrical zirconia 8° angled PC ferrule and assembled singlemode resilient alignment sleeve SC-APC simplex connector set (plug/adaptor/plug), adaptor and patchcord must meet in order for it to be categorised as an EN standard product. Since different variants and grades of performance are permitted, product marking details are given in 3.6. 1.2 Intermateability Although all products conforming to the requirements of this standard will intermate, the resulting level of random attenuation performance will only be ensured in accordance with Table 1. The intention is that this will be true irrespective of the manufacturing source(s) of the product. When intermating plug variants having different attenuation grades, the resulting level of attenuation cannot be assured to be any better than the worst attenuation grade. The intermating of a grade C plug with a grade B plug will result in an uncertain level of random attenuation performance. 1.3 Operating environment The tests selected combined with the severities and durations are representative of a category U environment described in EN 61753 1. 1.4 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this standard does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment programme. 1.5 Quality assurance Compliance with this standard does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme.

Steckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-Datenübertragungssysteme - Produktnormen - Teil 4 2: Bauart SC-APC-Simplex, 8°, zum Anschluss an Einmodenfasern der Typen B1.1 und B1.3 nach IEC 60793-2-50 mit Zirkoniumdioxyd-Ferrule für die Kategorie U

Jeux de connecteurs et composants d'interconnexion à utiliser dans les systèmes de communication par fibres optiques - Spécifications de produits - Partie 4 2: Type simplex SC/APC à 8 degrés câblé sur une fibre unimodale de types B1.1 et B1.3 selon la CEI 60793-2-50, avec férule en zircone plein de catégorie U

Konektorski sestavi in povezovalne komponente za optične komunikacijske sisteme - Specifikacije izdelka - 4-2. del: Tip SC/APC simplex 8°, zaključen z enorodnim vlaknom po IEC 60793-2-50 kategorij B1.1 in B1.3 s tulko iz polnega cirkonija kategorije U

1.1 Opredelitev izdelka
Ta standard vsebuje začetne zahteve za dimenzije, optične in mehanske zahteve ter zahteve za okoljsko učinkovitost, ki jim morajo ustrezati konektor, zaključen s cilindrično tulko PC iz cirkonija pod kotom 8 °, in sestavljeni enorodni prožni (z obojko) konektorski sestav simpleks SC-APC (priključek-adapter-priključek), adapter in priključni kabel, da bi bili opredeljeni kot izdelek standarda EN.
Ker so dovoljene različice in različne stopnje zmogljivosti, so podrobnosti o označevanju izdelka navedene v 3.6.
1.2 Medsebojna združljivost
Čeprav so vsi izdelki, ki ustrezajo zahtevam iz tega standarda, medsebojno združljivi, so ravni uspešnosti naključnega slabljenja zagotovljene le v skladu s preglednico 1. To velja ne glede na vire izdelave izdelka.
Kadar imajo medsebojno združljivi priključki različne stopnje slabljenja, se ne more zagotoviti, da bi bila raven slabljenja boljša od najslabše stopnje slabljenja.
Medsebojna združljivost priključka stopnje C s priključkom stopnje B povzroča negotovo raven uspešnosti naključnega slabljenja.
.3 Delovno okolje
Izbrani preskusi v kombinaciji s strogostjo in trajanjem predstavljajo kategorijo okolja U, opisano v EN 61753-1.
1.4 Zanesljivost
Medtem ko je pričakovana življenjska doba izdelka v tem okolju 20 let, skladnost s tem standardom ne jamči zanesljivosti izdelka. Ta se mora predvideti z uporabo priznanega programa za ocenjevanje zanesljivosti.
1.5 Zagotavljanje kakovosti
Skladnost s tem standardom ne jamči skladnosti izdelave izdelka. Ta se mora vzdrževati z uporabo priznanega programa za zagotavljanje kakovosti.

General Information

• Status: Published
• Publication Date: 24-Mar-2011
• Withdrawal Date: 01-Jan-2014
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jan-2019
• Ref Project: SIST EN 50377-4-2:2011 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.FLMVNHSteckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-Datenübertragungssysteme - Produktnormen - Teil 4 2: Bauart SC-APC-Simplex, 8°, zum Anschluss an Einmodenfasern der Typen B1.1 und B1.3 nach IEC 60793-2-50 mit Zirkoniumdioxyd-Ferrule für die Kategorie UJeux de connecteurs et composants d'interconnexion à utiliser dans les systèmes de communication par fibres optiques - Spécifications de produits - Partie 4 2: Type simplex SC/APC à 8 degrés câblé sur une fibre unimodale de types B1.1 et B1.3 selon la CEI 60793-2-50, avec férule en zircone plein de catégorie UConnector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 50377-4-2:2011SIST EN 50377-4-2:2011en01-junij-2011SIST EN 50377-4-2:2011SLOVENSKI
STANDARD



SIST EN 50377-4-2:2011



EUROPEAN STANDARD EN 50377-4-2 NORME EUROPÉENNE
EUROPÄISCHE NORM March 2011
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50377-4-2:2011 E
ICS 33.180.20
English version
Connector sets and interconnect components to be used in optical fibre communication systems -
Product specifications -
Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
Jeux de connecteurs et composants d'interconnexion à utiliser dans les systèmes de communication par fibres optiques -
Spécifications de produits -
Partie 4 2: Type simplex SC/APC à 8 degrés câblé sur une fibre unimodale de types B1.1 et B1.3 selon la CEI 60793-2-50, avec férule en zircone plein de catégorie U
Steckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-Datenübertragungssysteme -
Produktnormen -
Teil 4 2: Bauart SC-APC-Simplex, 8°, zum Anschluss an Einmodenfasern der Typen B1.1 und B1.3 nach IEC 60793-2-50 mit Zirkoniumdioxyd-Ferrule für die Kategorie U
This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 50377-4-2:2011



EN 50377-4-2:2011 – 2 – Foreword This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect, passive and connectorised components. The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50377-4-2 on 2011-01-02. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement
(dop)
2012-01-02 – latest date by which the national standards conflicting with the EN have to be withdrawn
(dow)
2014-01-02 __________ SIST EN 50377-4-2:2011



– 3 – EN 50377-4-2:2011 Connector sets and interconnect components to be used in optical fibre communication systems – Product specifications Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U Description Performance Coupling mechanism: Push-pull Application: For use in EN Category U (uncontrolled environment) Configuration: Plug/adaptor/plug Attenuation grades: (random mate) B: ≤ 0,12 dB mean ≤ 0,25 dB for 97 % of measurements
C: ≤ 0,25 dB mean
≤ 0,50 dB for 97 % of meas
...