EN 60352-5:2001/A1:2003
(Amendment)Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
D114/118: CLC/TC 48B disbanded * Superseded by EN 60352-5:2008
Lötfreie Verbindungen - Teil 5: Einpressverbindungen - Allgemeine Anforderungen, Prüfverfahren und Anwendungshinweise
Connexions sans soudure - Partie 5: Connexions insérées à force - Règles générales, méthodes d'essai et guide pratique
Spoji brez spajke - 5. del: Vtisnjeni spoji - Splošne zahteve, preskusne metode in praktični napotki - Dopolnilo A1 (IEC 60352-5:2001/A1:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60352-5:2002/A1:2004
STANDARD
november 2004
Spoji brez spajke - 5. del: Vtisnjeni spoji - Splošne zahteve, preskusne metode
in praktični napotki - Dopolnilo A1 (IEC 60352-5:2001/A1:2003)
Solderless connections - Part 5: Press-in connections - General requirements, test
methods and practical guidance - Amendment A1 (IEC 60352-5:2001/A1:2003)
ICS 29.120.20 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 60352-5/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2003
ICS 31.220.10
English version
Solderless connections
Part 5: Press-in connections –
General requirements, test methods and practical guidance
(IEC 60352-5:2001/A1:2003)
Connexions sans soudure Lötfreie Verbindungen
Partie 5: Connexions insérées à force - Teil 5: Einpressverbindungen –
Règles générales, méthodes d'essai Allgemeine Anforderungen, Prüfverfahren
et guide pratique und Anwendungshinweise
(CEI 60352-5:2001/A1:2003) (IEC 60352-5:2001/A1:2003)
This amendment A1 modifies the European Standard EN 60352-5:2001; it was approved by CENELEC
on 2003-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60352-5:2001/A1:2003 E
Foreword
The text of document 48B/1367/FDIS, future amendment 1 to IEC 60352-5:2001, prepared by
SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for
electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as amendment A1 to EN 60352-5:2001 on 2003-12-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an i
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.