EN 60352-5:2008

Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

Determines the suitability of press-in connections under specified mechanical, electrical and atmospheric conditions. Is applicable to solderless press-in connections for use in telecommunication equipment and in electronic devices employing similar techniques. Changes with respect to the previous edition deal with: use of four layer test boards; sample tolerance range requirements; use of platings other than tin or tin/lead.

Lötfreie Verbindungen - Teil 5: Einpressverbindungen - Allgemeine Anforderungen, Prüfverfahren und Anwendungshinweise

Connexions sans soudure - Partie 5: Connexions insérées à force - Exigences générales, méthodes d'essai et guide pratique

Détermine la conformité des connexions insérées à force dans des conditions mécaniques, électriques et atmosphériques spécifiées. Est applicable aux connexions insérées à force sans soudure utilisées dans les équipements de télécommunication et les systèmes électroniques employant des techniques similaires. Les modifications par rapport à l'édition précédente concernent: l'utilisation des cartes d'essai à quatre couches; les exigences des gammes de tolérances d'échantillons; l'utilisation de revêtements autres que ceux en étain ou étain/plomb.

Spoji brez spajke - 5. del: Vtisnjeni spoji - Splošne zahteve, preskusne metode in praktični napotki (IEC 60352-5:2008)

General Information

• Status: Withdrawn
• Publication Date: 05-Mar-2008
• Withdrawal Date: 31-Jan-2011
• ICS: 29.120.20 - Connecting devices
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-Mar-2015
• Completion Date: 28-Mar-2015
• Ref Project: SIST EN 60352-5:2008 - Solderless connections -- Part 5: Press-in connections - General requirements, test methods and practical guidance

Relations

• Replaces: EN 60352-5:2001 - Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
• Effective Date: 29-Jan-2023
• Replaces: EN 60352-5:2001/A1:2003 - Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
• Effective Date: 29-Jan-2023
• Replaced By: EN 60352-5:2012 - Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
• Effective Date: 29-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance (IEC 60352-5:2008)Connexions sans soudure - Partie 5: Connexions insérées a force - Exigences générales, méthodes d'essai et guide pratique (CEI 60352-5:2008)Lötfreie Verbindungen - Teil 5: Einpressverbindungen - Allgemeine Anforderungen, Prüfverfahren und Anwendungshinweise (IEC 60352-5:2008)Ta slovenski standard je istoveten z:EN 60352-5:2008SIST EN 60352-5:2008en,fr29.120.20ICS:SIST EN 60352-5:2002/A1:2004SIST EN 60352-5:20021DGRPHãþDSLOVENSKI
STANDARDSIST EN 60352-5:200801-maj-2008

EUROPEAN STANDARD EN 60352-5 NORME EUROPÉENNE
EUROPÄISCHE NORM March 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60352-5:2008 E
ICS 31.220.10 Supersedes EN 60352-5:2001 + A1:2003
English version
Solderless connections -
Part 5: Press-in connections -
General requirements, test methods and practical guidance (IEC 60352-5:2008)
Connexions sans soudure -
Partie 5: Connexions insérées à force -
Exigences générales,
méthodes d'essai et guide pratique (CEI 60352-5:2008)
Lötfreie Verbindungen -
Teil 5: Einpressverbindungen -
Allgemeine Anforderungen,
Prüfverfahren und Anwendungshinweise (IEC 60352-5:2008)
This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

- 2 -
Foreword The text of document 48B/1805A/FDIS, future edition 3 of IEC 60352-5, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60352-5 on 2008-02-01. This European Standard supersedes EN 60352-5:2001 + A1:2003. EN 60352-5:2008 includes the following significant technical changes with respect to EN 60352-5:2001: – a recommendation to use four layer test boards in 5.1; – removal of sample tolerance range requirements in 5.3.2.1; they have been moved to Annex B; – Subclause 6.4.2 has been modified to clarify that platings other than tin or tin/lead may be used. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2008-11-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2011-02-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60352-5:2008 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 61249-2-2 NOTE
Harmonized as EN 61249-2-2:2005 (not modified). __________

- 3 - EN 60352-5:2008
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year IEC 60050-581 A1 1978 1998 International Electrotechnical Vocabulary (IEV) -
Chapter 581: Electromechanical components for electronic equipment -
-
IEC 60068-1 + corr. October
+ A1 1988 1988 1992 Environmental testing -
Part 1: General and guidance
EN 60068-1
IEC 61249 Series Materials for printed boards and other interconnecting structures EN 61249 Series
IEC 60352-1
1997 Solderless connections -
Part 1: Wrapped connections - General requirements, test methods and practical guidance EN 60352-1 1997
IEC 60512 Series Connectors for electronic equipment - Tests and measurements
EN 60512 Series
IEC 60512-1-100 - 1) Connectors for electronic equipment - Tests and measurements -
Part 1-100: General - Applicable publications EN 60512-1-100 2006 2)
IEC 61188-5-1 - 1) Printed boards and printed board
assemblies - Design and use -
Part 5-1: Attachment (land/joint) considerations - Generic requirements EN 61188-5-1 2002 2)
IEC 62326-4 1996 Printed boards -
Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specificationEN 62326-4 1997
1) Undated reference.
2) Valid edition at date of issue.

IEC 60352-5Edition 3.0 2008-01INTERNATIONAL STANDARD NORME INTERNATIONALESolderless connections –
Part 5: Press-in connections – General requirements, test methods and practical guidance
Connexions sans soudure –
Partie 5: Connexions insérées à force – Exigences générales, méthodes d’essai et guide pratique
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE WICS 31.220.10 PRICE CODECODE PRIXISBN 2-8318-9522-7

– 2 – 60352-5 © IEC:2008
CONTENTS FOREWORD.4 INTRODUCTION.6
1 Scope and object.7 2 Normative references.7 3 Terms and definitions.8 4 Requirements.9 4.1 General.9 4.2 Tools.9 4.2.1 Tools evaluation.9 4.3 Press-in terminations.9 4.3.1 Materials.9 4.3.2 Dimensions of the press-in zone.9 4.3.3 Surface finishes.9 4.3.4 Design features.10 4.4 Printed boards.10 4.4.1 General.10 4.4.2 Materials.10 4.4.3 Thickness of printed boards.10 4.4.4 Plated-through hole.10 4.5 Press-in connections.11 4.6 Manufacturer´s specification.11 5 Tests.12 5.1 General.12 5.1.1 General remarks.12 5.1.2 Standard conditions for testing.13 5.1.3 Mounting of specimens/sets of parts.13 5.2 Test and measuring methods.13 5.2.1 General examination.13 5.2.2 Mechanical tests.14 5.2.3 Electrical tests.18 5.2.4 Climatic tests.18 5.3 Test schedules.19 5.3.1 General.19 5.3.2 Qualification test schedule.19 5.3.3 Application test schedule.21 5.3.4 Flow chart.23 5.4 Test report.24 5.4.1 Qualification test report.24 5.4.2 Application test report.24 6 Practical guidance.25 6.1 Current-carrying capacity.25 6.2 Tool information.25 6.2.1 Termination insertion tool.25 6.2.2 Support block.25 6.2.3 Termination removal tool.26

60352-5 © IEC:2008 – 3 –
6.3 Termination information.26 6.3.1 General.26 6.3.2 Design features.26 6.3.3 Materials and surface finishes.26 6.3.4 Press-in termination with wrap post.27 6.3.5 Press-in terminations with connector contact elements.27 6.4 Printed board information.28 6.4.1 General.28 6.4.2 Plated-through hole.28 6.5 Connection information.29 6.5.1 General.29 6.5.2 Repair of press-in connections.30 6.5.3 Combination of press-in connections and soldered connections.31 6.5.4 Bimetallic electrolytic corrosion effects.31
Annex A (normative)
Solid press-in terminations.32 Annex B (informative)
Plated through hole tolerance range.34
Bibliography.36
Figure 1 – Test arrangement, bending.14 Figure 2 – Test arrangement – push-out force.15 Figure 3 – Transverse section of a press-in connection.17 Figure 4 – Longitudinal section of a press-in connection.17 Figure 5 – Test arrangement for contact resistance.18 Figure 6 – Qualification test schedule.23 Figure 7 – Press-in connection made with a press-in termination, application level a).29 Figure 8 – Press-in connection made with a press-in termination, application level b).30 Figure 9 – Example of a termination removal tool.31 Figure A.1 – Parallelism of a solid press-in zone.33 Figure B.1 – Example of hole ranges.34
Table 1 – Finished plated-through holes.11 Table 2 – Vibration, prefe
...