EN 62541-7:2015
(Main)OPC unified architecture - Part 7: Profiles
OPC unified architecture - Part 7: Profiles
IEC 62541-7:2015 describes the OPC Unified Architecture (OPC UA) Profiles. The Profiles in this document are used to segregate features with regard to testing of OPC UA products and the nature of the testing (tool based or lab based). This includes the testing performed by the OPC Foundation provided OPC UA CTT (a self-test tool) and by the OPC Foundation provided Independent certification test labs. It is also defining functionality that can only be tested in an a lab and defining the grouping of functionality that is to be used when testing OPC UA products either in a lab or using automated tools. This second edition cancels and replaces the first edition published in 2012 and constitutes a technical revision. It includes the following changes: - Added a large number of new Facets to cover additional functional areas of OPC UA. Most significantly: - Facets for Historical Access; - Facets for Aggregates; - Facets for HTTPs; - New Security Facets; - New User Token Facet that supports anonymous access; - Best Practice Facets as well as New Security Policy for asymmetric key length > 2048.
OPC Unified Architecture - Teil 7: Profile
Architecture unifiée OPC - Partie 7: Profils
L'IEC 62541-7:2015 décrit les Profils de l'Architecture unifiée OPC (OPC UA). Les Profils du présent document permettent de dissocier les caractéristiques relatives aux essais des produits OPC UA, ainsi que la nature des essais (basés sur un outil ou en laboratoire). Ceci inclut les essais effectués par l'outil d'essai de conformité (CTT) OPC UA de la Fondation OPC (outil autonome pour les essais), ainsi que les essais réalisés par des laboratoires de certification indépendants de cette même fondation. Elle inclut la définition d'une fonctionnalité qui ne peut être soumise à l'essai qu'en laboratoire, ainsi que la définition du regroupement d'une fonctionnalité à appliquer lors des essais de produits OPC UA en laboratoire ou en utilisant des outils automatisés. Cette deuxième édition annule et remplace la première édition parue en 2012. Elle constitue une révision technique. Cette édition inclut les modifications suivantes: - Ajout d'un nombre important de nouvelles Facettes pour couvrir des additional functional areas of OPC UA. Plus particulièrement: - Facettes pour l'Accès à l'historique; - Facettes pour les Agrégats; - Facettes pour les HTTP; - Nouvelles facettes de sécurité; - Nouvelle facette de Jeton Utilisateur prenant en charge l'accès Anonyme et Facettes Meilleures Pratiques; - Et une Nouvelle Politique de Sécurité pour longueur de clé asymétrique > 2048.
Enotna arhitektura OPC - 7. del: Profili (IEC 62541-7:2015)
Ta del standarda IEC 62541 opisuje profile enotne arhitekture OPC (OPC UA). Profili v tem dokumentu se uporabljajo za ločevanje funkcij pri določanju preskušanja izdelkov enotne arhitekture OPC in narave preskušanja (na podlagi orodja ali laboratorija). To vključuje preskuse, ki se izvajajo z orodjem za samopreskušanje skladnosti enotne arhitekture OPC (OPC UA CTT), ki ga ponuja organizacija OPC Foundation, in preskuse, ki jih izvajajo neodvisni certifikacijski preskuševalni laboratoriji organizacije OPC Foundation. To se lahko v enaki meri nanaša tudi na orodja za preskušanje, ki jih ponujajo druge organizacije, ali preskuševalne laboratorije drugih organizacij. Pomemben je koncept preskušanja s samodejnim orodjem v primerjavi z laboratorijskim preskušanjem. Obseg tega standarda vključuje definicijo funkcij, ki jih je mogoče preskušati samo v laboratoriju, in definicijo skupin funkcionalnosti, ki jih je treba uporabiti pri preskušanju izdelkov OPC UA v laboratoriju ali s samodejnimi orodji. Definiranje dejanskih primerov preskusov ni vključeno v obseg tega dokumenta, so pa vključene splošne kategorije primerov preskusov.
Večina aplikacij OPC UA ustreza več profilom, ne pa vsem.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Enotna arhitektura OPC - 7. del: Profili (IEC 62541-7:2015)OPC Unified Architecture - Teil 7: Profile (IEC 62541-7:2015)Architecture unifiée OPC - Partie 7: Profils (IEC 62541-7:2015)OPC Unified Architecture - Part 7: Profiles (IEC 62541-7:2015)35.240.50Uporabniške rešitve IT v industrijiIT applications in industry25.040.40Merjenje in krmiljenje industrijskih postopkovIndustrial process measurement and controlICS:Ta slovenski standard je istoveten z:EN 62541-7:2015SIST EN 62541-7:2015en,fr,de01-oktober-2015SIST EN 62541-7:2015SLOVENSKI
STANDARDSIST EN 62541-7:20121DGRPHãþD
SIST EN 62541-7:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 62541-7
May 2015 ICS 25.040.40; 35.100
Supersedes
EN 62541-7:2012
English Version
OPC unified architecture - Part 7: Profiles (IEC 62541-7:2015)
Architecture unifiée OPC - Partie 7: Profils (IEC 62541-7:2015)
OPC Unified Architecture - Teil 7: Profile (IEC 62541-7:2015) This European Standard was approved by CENELEC on 2015-04-29. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62541-7:2015 E SIST EN 62541-7:2015
EN 62541-7:2015 - 2 - Foreword The text of document 65E/378/CDV, future edition 2 of IEC 62541-7, prepared by SC 65E "Devices and integration in enterprise systems", of IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62541-7:2015. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-01-29 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-04-29
This document supersedes EN 62541-7:2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). Endorsement notice The text of the International Standard IEC 62541-7:2015 was approved by CENELEC as a European Standard without any modification. SIST EN 62541-7:2015
- 3 - EN 62541-7:2015 Annex ZA (normative)
Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC/TR 62541-1 -
OPC unified architecture - Part 1: Overview and concepts CLC/TR 62541-1 -
IEC/TR 62541-2 -
OPC unified architecture - Part 2: Security model CLC/TR 62541-2 -
IEC 62541-3 -
OPC unified architecture - Part 3: Address Space Model EN 62541-3 -
IEC 62541-4 -
OPC Unified Architecture - Part 4: Services EN 62541-4 -
IEC 62541-5 -
OPC unified architecture - Part 5: Information Model EN 62541-5 -
IEC 62541-6 -
OPC un
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.