EN 60512-9-5:2010

Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

IEC 60512-9-5:2010 when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard method for subjecting solderless connections to thermal stress conditioning by cyclic current loading.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 9-5: Dauerprüfungen - Prüfung 9e: Strombelastung, zyklisch

Connecteurs pour équipements électroniques - Essais et mesures - Partie 9-5: Essais d'endurance - Essai 9e: Charge en courant, essai cyclique

La CEI 60512-9-5:2010 est utilisée pour les essais des connecteurs du domaine d'activité du comité d'études 48, lorsque la spécification particulière l'exige. Elle peut également être utilisée pour des dispositifs similaires lorsqu'une spécification particulière le stipule. L'objet de cette norme est de définir une méthode normalisée pour soumettre les connexions sans soudure à une contrainte thermique appliquée au moyen d'une charge en courant de façon cyclique.

Konektorji za elektronsko opremo - Preskusi in meritve - 9-5. del: Preskušanje vzdržljivosti - Preskus 9e: Tokovna obremenitev, ciklična (IEC 60512-9-5:2010)

Ta del IEC 60512, kadar ga zahteva podrobna specifikacija, se uporablja za preskušanje konektorjev v okviru tehničnega odbora 48. Lahko se uporablja tudi za podobne naprave, kadar ga določa podrobna specifikacija. Cilj tega standarda je podrobno opredeliti standardno metodo s katero so nespajkani spojniki podvrženi pogojem termične napetosti s ciklično tokovno obremenitvijo.

General Information

• Status: Withdrawn
• Publication Date: 20-May-2010
• Withdrawal Date: 30-Apr-2013
• ICS: 31.220.01 - Electromechanical components in general
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 14-Jul-2023
• Completion Date: 14-Jul-2023
• Ref Project: SIST EN 60512-9-5:2010 - Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic (IEC 60512-9-5:2010)

Relations

• Replaced By: EN IEC 60512-9-5:2020 - Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
• Effective Date: 27-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 9-5: Dauerprüfungen - Prüfung 9e: Strombelastung, zyklisch (IEC 60512-9-5:2010)Connecteurs pour équipements électroniques - Essais et mesures - Partie 9-5: Essais d'endurance - Essai 9e: Charge en courant, essai cyclique (CEI 60512-9-5:2010)Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic (IEC 60512-9-5:2010)31.220.10Plug-and-socket devices. ConnectorsICS:Ta slovenski standard je istoveten z:EN 60512-9-5:2010SIST EN 60512-9-5:2010en01-september-2010SIST EN 60512-9-5:2010SLOVENSKI
STANDARD



SIST EN 60512-9-5:2010



EUROPEAN STANDARD EN 60512-9-5 NORME EUROPÉENNE
EUROPÄISCHE NORM May 2010
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-9-5:2010 E
ICS 31.220.01
English version
Connectors for electronic equipment -
Tests and measurements -
Part 9-5: Endurance tests -
Test 9e: Current loading, cyclic (IEC 60512-9-5:2010)
Connecteurs pour équipements électroniques -
Essais et mesures -
Partie 9-5: Essais d'endurance -
Essai 9e: Charge en courant,
essai cyclique (CEI 60512-9-5:2010)
Steckverbinder für elektronische Einrichtungen -
Mess- und Prüfverfahren -
Teil 9-5: Dauerprüfungen -
Prüfung 9e: Strombelastung, zyklisch (IEC 60512-9-5:2010)
This European Standard was approved by CENELEC on 2010-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 60512-9-5:2010



EN 60512-9-5:2010 - 2 -
Foreword The text of document 48B/2019/CDV, future edition 1 of IEC 60512-9-5, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60512-9-5 on 2010-05-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2011-02-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2013-05-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60512-9-5:2010 was approved by CENELEC as a European Standard without any modification. __________ SIST EN 60512-9-5:2010



- 3 - EN 60512-9-5:2010 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60512-1 - Connectors for electronic equipment - Tests and measurements -
Part 1: General EN 60512-1 -
IEC 60512-1-1 - Connectors for electronic equipment - Tests and measurements -
Part 1-1: General examination -
Test 1a: Visual examination EN 60512-1-1 -
IEC 60512-2-1 - Connectors for electronic equipment - Tests and measurements -
Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method EN 60512-2-1 -
IEC 60512-2-6 - Connectors for electronic equipment - Tes
...