EN 60512-9-2:2012
(Main)Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature
Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature
IEC 60512-9-2:2011 when required by the detail specification, this part of IEC 60512, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard test method to assess the ability of a connector to withstand elevated temperatures with electrical loading. This standard cancels and replaces Test 9b of IEC 60512-5, issued in 1992.
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 9-2: Dauerprüfungen - Prüfung 9b: Elektrische Belastung bei hoher Temperatur
Connecteurs pour équipements électroniques - Essais et mesures - Partie 9-2: Essais d'endurance - Essai 9b: Charge électrique et température
La CEI 60512-9-2:2011 Lorsque la spécification particulière l'exige, la présente partie de la CEI 60512 est utilisée pour les essais des connecteurs qui entrent dans le domaine d'application du comité d'études 48 de la CEI. Ces essais peuvent aussi être utilisés sur des composants similaires lorsqu'une spécification particulière le stipule. L'objet de la présente norme est de définir une méthode d'essai normalisée pour évaluer l'aptitude d'un connecteur à résister à des températures élevées avec charge électrique. La présente norme annule et remplace l'essai 9b de la CEI 60512-5, publiée en 1992.
Konektorji za elektronsko opremo - Preskusi in meritve - 9-2. del: Preskusi vzdržljivosti - Preskus 9b: Električno breme in temperatura
Ta del standarda IEC 60512 se uporablja, če tako zahteva podrobna specifikacija, za preskušanje konektorjev na področju uporabe tehničnega odbora 48. Lahko se uporablja tudi za podobne elemente, če je tako določeno v podrobni specifikaciji. Cilj tega standarda je podrobno opisati standardno preskusno metodo za ocenjevanje zmožnosti konektorja, da vzdrži visoke temperature z električnim bremenom.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 9-2: Dauerprüfungen - Prüfung 9b: Elektrische Belastung bei hoher TemperaturConnecteurs pour équipements électroniques - Essais et mesures - Partie 9-2: Essais d'endurance - Essai 9b: Charge électrique et températureConnectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature31.220.10Plug-and-socket devices. ConnectorsICS:Ta slovenski standard je istoveten z:EN 60512-9-2:2012SIST EN 60512-9-2:2012en,fr,de01-maj-2012SIST EN 60512-9-2:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 60512-9-2 NORME EUROPÉENNE EUROPÄISCHE NORM February 2012
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-9-2:2012 E
ICS 31.220.01
English version
Connectors for electronic equipment -
Tests and measurements -
Part 9-2: Endurance tests -
Test 9b: Electrical load and temperature (IEC 60512-9-2:2011)
Connecteurs pour équipements électroniques -
Essais et mesures -
Partie 9-2: Essais d'endurance -
Essai 9b: Charge électrique et température (CEI 60512-9-2:2011) Steckverbinder für elektronische Einrichtungen -
Mess- und Prüfverfahren -
Teil 9-2: Dauerprüfungen -
Prüfung 9b: Elektrische Belastung bei hoher Temperatur (IEC 60512-9-2:2011)
This European Standard was approved by CENELEC on 2012-01-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Foreword The text of document 48B/2243/FDIS, future edition 1 of IEC 60512-9-2, prepared by SC 48B, "Connectors", of IEC TC 48, "Electromechanical components and mechanical structures for electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60512-9-2:2012.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-10-02 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-01-02
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 60512-9-2:2011 was approved by CENELEC as a European Standard without any modification.
- 3 - EN 60512-9-2:2012
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60512-1-1 - Connectors for electronic equipment - Tests and measurements -
Part 1-1: General examination - Test 1a: Visual examination EN 60512-1-1 -
IEC 60512-1-100 - Connectors for electronic equipment - Tests and measurements -
Part 1-100: General - Applicable publications EN 60512-1-100 -
IEC 60512-2-1 - Connectors for electronic equipment - Tests and measurements -
Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact
resistance - Millivolt level method EN 60512-2-1 -
IEC 60512-2-6 - Connectors for electronic equipment - Tests and measurements -
Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity EN 60512-2-6 -
IEC 60512-3-1 - Connectors for electronic equipment - Tests and measurements -
Part 3-1: Insulation tests - Test 3a: Insulation resistance EN 60512-3-1 -
IEC 60512-4-1 - Connectors for electronic equipment - Tests and measurements -
Part 4-1: Voltage stress tests - Test 4a: Voltage proof EN 60512-4-1 -
IEC 60512-9-2 Edition 1.0 2011-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Connectors for electronic equipment – Tests and measurements –
Part 9-2: Endurance tests – Test 9b: Electrical load and temperature
Connecteurs pour équipements électroniques – Essais et mesures –
Partie 9-2: Essais d’endurance – Essai 9b: Charge électrique et température
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE G ICS 31.220.01 PRICE CODE CODE PRIX ISBN 978-2-88912-809-9
– 2 – 60512-9-2 © IEC:2011 CONTENTS FOREWORD . 3 1 Scope and object . 5 2 Normative references . 5 3 Preparation . 5
Preparation of the specimen . 5 3.1 Equipment . 6 3.24 Test method . 6 5 Final measurements . 6 6 Details to be specified . 7
60512-9-2 © IEC:2011 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –
Part 9-2: Endurance tests –
Test 9b: Electrical load and temperature
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation fro
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.