Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements

IEC 61158-3-4:2014 defines the services provided to the Type 4 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model and systems management at the boundary between the data-link layer and systems management of the fieldbus reference model. This second edition cancels and replaces the first edition published in 2007. It constitutes a minor technical revision. The main changes are: editorial improvements and editorial corrections.

Industrielle Kommunikationsnetze - Feldbusse - Teil 3-4: Dienstfestlegungen des Data Link Layer (Sicherungsschicht) - Typ 4-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-4: Définition des services de la couche liaison de données - Eléments de type 4

L'IEC 61158-3-4:2014 définit les services fournis à la couche application de bus de terrain Type 4 au niveau de la frontière entre les couches application et liaison de données du modèle de référence de bus de terrain et à la gestion des systèmes au niveau de la frontière entre la couche liaison de données et la gestion des systèmes selon le modèle de référence de bus de terrain. Cette deuxième édition annule et remplace la première édition parue en 2007. Cette édition constitue une révision technique. Les modifications sont: améliorations éditoriales et corrections éditoriales.

Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-4. del: Definicija opravil na ravni podatkovnih povezav - Elementi tipa 4 (IEC 61158-3-4:2014)

Ta del standarda IEC 61158 določa skupne elemente za osnovne časovno kritične sporočilne komunikacije med napravami v avtomatizacijskem okolju. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja. Ta standard na abstrakten način določa na zunaj vidna opravila, ki jih zagotavlja
podatkovna povezovalna raven procesnih vodil tipa 4 v smislu
a) preprostih dejanj in dogodkov opravil;
b) parametrov, povezanih z vsakim preprostim dejanjem in dogodkom, ter obliko, ki jo prevzamejo; in
c) medsebojnih povezav med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji.
Namen tega standarda je določiti opravila, ki se zagotavljajo za
• aplikacijsko raven procesnih vodil tipa 4 na meji med aplikacijo in podatkovno povezovalno ravnjo referenčnega modela procesnega vodila;
• upravljanje sistemov na meji med podatkovno povezovalno ravnjo in upravljanjem sistemov referenčnega modela procesnega vodila.

General Information

Status
Withdrawn
Publication Date
16-Oct-2014
Withdrawal Date
16-Sep-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
29-May-2022
Completion Date
29-May-2022

Relations

Buy Standard

Standard
EN 61158-3-4:2015
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61158-3-4:2015
01-april-2015
1DGRPHãþD
SIST EN 61158-3-4:2008
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-4. del:
Definicija opravil na ravni podatkovnih povezav - Elementi tipa 4 (IEC 61158-3-
4:2014)
Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer
service definition - Type 4 elements (IEC 61158-3-4:2014)
Industrielle Kommunikationsnetze - Feldbusse - Teil 3-4: Dienstfestlegungen des Data
Link Layer (Sicherungsschicht) - Typ 4-Elemente (IEC 61158-3-4:2014)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-4:
Définition des services de la couche liaison de données - Eléments de type 4 (CEI 61158
-3-4:2014)
Ta slovenski standard je istoveten z: EN 61158-3-4:2014
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.20 Podatkovni povezovalni sloj Data link layer
35.110 Omreževanje Networking
SIST EN 61158-3-4:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61158-3-4:2015

---------------------- Page: 2 ----------------------

SIST EN 61158-3-4:2015


EUROPEAN STANDARD EN 61158-3-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2014
ICS 25.040.40; 35.100.20; 35.110 Supersedes EN 61158-3-4:2008
English Version
Industrial communication networks - Fieldbus specifications -
Part 3-4: Data-link layer service definition - Type 4 elements
(IEC 61158-3-4:2014)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 3-4:
bus de terrain - Partie 3-4: Définition des services de la Dienstfestlegungen des Data Link Layer
couche liaison de données - Eléments de type 4 (Sicherungsschicht) - Typ 4-Elemente
(CEI 61158-3-4:2014) (IEC 61158-3-4:2014)
This European Standard was approved by CENELEC on 2014-09-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61158-3-4:2014 E

---------------------- Page: 3 ----------------------

SIST EN 61158-3-4:2015
EN 61158-3-4:2014 - 2 -
Foreword
The text of document 65C/759/FDIS, future edition 2 of IEC 61158-3-4, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-3-4:2014.
The following dates are fixed:
(dop) 2015-06-17
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2017-09-17
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 61158-3-4:2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61158-3-4:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61158-1 NOTE Harmonized as EN 61158-1.
IEC 61158-2 NOTE Harmonized as EN 61158-2.
IEC 6115
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.