EN 60811-501:2012/prA2:2023

Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds

Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 501: Mechanische Prüfungen - Prüfungen zur Bestimmung der mechanischen Eigenschaften von Isolier- und Mantelwerkstoffen

Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non métalliques - Partie 501: Essais mécaniques - Détermination des propriétés mécaniques des mélanges pour les enveloppes isolantes et les gaines

Električni in optični kabli - Preskuševalne metode za nekovinske materiale - 501. del: Mehanski preskusi - Preskusi za ugotavljanje mehanskih lastnosti zmesi za izolacije in oplaščenja - Dopolnilo A2

General Information

• Status: Not Published
• Publication Date: 19-Nov-2024
• ICS: 29.035.01 - Insulating materials in general
• ICS: 29.060.20 - Cables
• Technical Committee: CLC/TC 20 - Electric cables
• Drafting Committee: IEC/TC 20 - IEC_TC_20
• Current Stage: 4060 - Enquiry results established and sent to TC, SR, BTTF - Enquiry
• Start Date: 21-Apr-2023
• Completion Date: 21-Apr-2023
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60811-501:2012/oprA2:2023 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds

Relations

• Amends: EN 60811-501:2012 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
• Effective Date: 02-Aug-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60811-501:2012/oprA2:2023
01-april-2023
Električni in optični kabli - Preskuševalne metode za nekovinske materiale - 501.
del: Mehanski preskusi - Preskusi za ugotavljanje mehanskih lastnosti zmesi za
izolacije in oplaščenja - Dopolnilo A2
Electric and optical fibre cables - Test methods for non-metallic materials - Part 501:
Mechanical tests - Tests for determining the mechanical properties of insulating and
sheathing compounds
Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene
Werkstoffe - Teil 501: Mechanische Prüfungen - Prüfungen zur Bestimmung der
mechanischen Eigenschaften von Isolier- und Mantelwerkstoffen
Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non
métalliques - Partie 501: Essais mécaniques - Détermination des propriétés mécaniques
des mélanges pour les enveloppes isolantes et les gaines
Ta slovenski standard je istoveten z: EN 60811-501:2012/prA2:2023
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
29.060.20 Kabli Cables
SIST EN 60811-501:2012/oprA2:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60811-501:2012/oprA2:2023

---------------------- Page: 2 ----------------------
SIST EN 60811-501:2012/oprA2:2023
20/2082/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60811-501/AMD2 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-01-27 2023-04-21
SUPERSEDES DOCUMENTS:
20/2048/CD, 20/2075A/CC

IEC TC 20 : ELECTRIC CABLES
SECRETARIAT: SECRETARY:
Germany Mr Walter Winkelbauer
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation ,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are
reminded that the enquiry stage is the final stage for submitting "in some countries" clauses. See
AC/22/2007.

TITLE:
Amendment 2 - Electric and optical fibre cables - Test methods for non-metallic materials - Part
501: Mechanical tests - Tests for determining the mechanical properties of insulating and
sheathing compounds

Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
SIST EN 60811-501:2012/oprA2:2023
20/2082/CDV – 2 – IEC CDV 60811-501/AMD2 © IEC:2023
PROPOSED STABILITY DATE: 2030

NOTE FROM TC/SC OFFICERS:

---------------------- Page: 4 ----------------------
SIST EN 60811-501:2012/oprA2:2023
IEC CDV 60811-501/AMD2 © IEC:2022 – 3 – 20/2082/CDV
1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
3
4 ELECTRIC AND OPTICAL FIBRE CABLES –
5 TEST METHODS FOR NON-METALLIC MATERIALS –
6
7 Part 501: Mechanical tests –
8 Tests for determining the mechanical properties
9 of insulating and sheathing compounds
10
11 AMENDMENT 2
12
13 FOREWORD
14 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
15 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
16 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
17 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
18 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
19 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
20 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
21 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
22 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
23 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
24 consensus of opinion on the relevant subjects since each technical committee has representation from all
25 interested IEC National Committees.
26 3) IEC Publications have the form of recommendations for international use and ar
...