iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61069-7:1999

(Main)

Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety

Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety

The treatment of safety in this standard is confined to hazards that can be present within the industrial-process measurement and control system itself. Considerations of hazards that can be introduced by the process or equipment under control of the industrial-process measurement and control system to be assessed are excluded. If the system mission includes activities which could affect the safety of the process or equipment under control, the requirements of these activities are the subject of IEC 61508.

Leittechnik für industrielle Prozesse - Ermittlung der Systemeigenschaften zum Zweck der Eignungsbeurteilung eines Systems - Teil 7: Eignungsbeurteilung und Systemsicherheit

Mesure et commande dans les processus industriels - Appréciation des propriétés d'un système en vue de son évaluation - Partie 7: Evaluation de la sécurité d'un système

L'étude de la sécurité dans la présente norme se limite aux dangers pouvant se présenter dans le système de mesure et de commande des processus industriels proprement dit. L'étude des dangers pouvant être introduits par le processus ou l'équipement contrôlés par le système de mesure et de commande de processus industriels de la commande faisant l'objet de l'évaluation est exclue. Si la mission du système inclut des activités pouvant affecter la sécurité du processus ou de l'équipement contrôlés, les exigences concernant ces activités fond l'objet de la CEI 61508.

Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety

General Information

Status
Withdrawn
Publication Date
16-Aug-1999
Withdrawal Date
31-Jul-2002
ICS
25.040.40 - Industrial process measurement and control
Technical Committee
CLC/TC 65X - Industrial-process measurement, control and automation
Drafting Committee
IEC/SC 65A - IEC_SC_65A
Parallel Committee
IEC/SC 65A - IEC_SC_65A
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
20-Jul-2019
Completion Date
20-Jul-2019
Ref Project
SIST EN 61069-7:2001 - Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment -- Part 7: Assessment of system safety

Relations

Replaced By
EN 61069-7:2016 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety
Effective Date
26-Jan-2023

Buy Standard

EN 61069-7:2001EN 61069-7:2001
PreviousNext
Standard
EN 61069-7:2001
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2001
Industrial-process measurement and control - Evaluation of system properties for
the purpose of system assessment - Part 7: Assessment of system safety
Industrial-process measurement and control - Evaluation of system properties for the
purpose of system assessment -- Part 7: Assessment of system safety
Leittechnik für industrielle Prozesse - Ermittlung der Systemeigenschaften zum Zweck
der Eignungsbeurteilung eines Systems -- Teil 7: Eignungsbeurteilung und
Systemsicherheit
Mesure et commande dans les processus industriels - Appréciation des propriétés d'un
système en vue de son évaluation -- Partie 7: Evaluation de la sécurité d'un système
Ta slovenski standard je istoveten z: EN 61069-7:1999
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

-------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62443-2-1:2024(Main)
Security for industrial automation and control systems - Part 2-1: Security program requirements for IACS asset owners
SIST EN IEC 62443-2-1:2024

IEC 62443-2-1:2024 specifies asset owner security program (SP) policy and procedure requirements for an industrial automation and control system (IACS) in operation. This document uses the broad definition and scope of what constitutes an IACS as described in IEC TS 62443‑1‑1. In the context of this document, asset owner also includes the operator of the IACS. This document recognizes that the lifespan of an IACS can exceed twenty years, and that many legacy systems contain hardware and software that are no longer supported. Therefore, the SP for most legacy systems addresses only a subset of the requirements defined in this document. For example, if IACS or component software is no longer supported, security patching requirements cannot be met. Similarly, backup software for many older systems is not available for all components of the IACS. This document does not specify that an IACS has these technical requirements. This document states that the asset owner needs to have policies and procedures around these types of requirements. In the case where an asset owner has legacy systems that do not have the native technical capabilities, compensating security measures can be part of the policies and procedures specified in this document. This edition includes the following significant technical changes with respect to the previous edition: a) revised requirement structure into SP elements (SPEs), b) revised requirements to eliminate duplication of an information security management system (ISMS), and c) defined a maturity model for evaluating requirements.

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62382:2024(Main)
Control systems in the process industry - Electrical and instrumentation loop check
SIST EN IEC 62382:2024

IEC 62382:2024 defines procedures and specifications for loop check, which comprises the activities between the completion of the loop construction (including installation and point-to-point checks) and the beginning of cold commissioning. This document is applicable for the construction of new plants and for expansion or retrofits (i.e. revamping) of electrical and instrument (E&I) installations in existing plants (including PLC, DCS, panel-mounted and field instrumentation). It does not include a detailed checkout of power distribution systems, except as they relate to the loops being checked (i.e. a motor starter or a power supply to a four-wire transmitter). Loop checks can be performed throughout the lifecycle of the plant. This document is also applicable when loop checks are performed after commissioning. This document describes what is intended to be tested but not how the test is performed, due to the wide range of technologies and equipment available. The intent of this document is to provide a means for all parties, including the owner, the installer and the vendor, to clearly establish and agree on the scope of activities and responsibilities involved in performing these tests in order to achieve a timely delivery and acceptance of the automation system. The activities described in this document can be taken as a guideline and adapted to the specific requirements of the process, plant or equipment. This edition includes the following significant technical changes with respect to the previous edition: a) general re-organization of the content of the previous edition, moving informative content to the annexes; b) replacing the forms based on I/O type in IEC 62382:2012, Annex A to Annex E with an example of a generic loop check form; c) providing additional references to other applicable standards.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63303:2024(Main)
Human machine interfaces for process automation systems
SIST EN IEC 63303:2024

IEC 63303:2024 defines general structures and functions of HMI systems. An HMI life cycle example for HMI systems is included. This document specifies requirements and recommendations for activities in each stage of the life cycle including designing, using, and maintaining the HMI system. It also provides requirements and recommendations for functions and performance of HMI systems. The requirements and recommendations in this document are applicable to any controlled process using an HMI to interface to a control system. There can be differences in implementation to meet the specific needs based on the application and controlled process type.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63082-2:2024(Main)
Intelligent device management - Part 2: Requirements and recommendations
SIST EN IEC 63082-2:2024

IEC 63082-2:2024 specifies requirements and recommendations for establishing and maintaining intelligent device management (IDM) as outlined in IEC TR 63082-1 in an enterprise having one or more facilities. The following topics are included in the scope of this document: - optimizing functionality and performance of intelligent devices for their use; - managing information related to IDM; - integrating intelligent devices into industrial automation and control systems (IACS) in facilities; - exchanging information between stakeholders that achieve and sustain IDM; - coordinating multiple asynchronous IDM life cycles. The following topics are outside the scope of this document: - defining and determining the function and performance of intelligent devices; - defining and specifying technologies and tools that provide, preserve and manage information related to IDM such as FDT, FDI, portable on-line and off-line tools, configuration tools, historians, and maintenance planning tools; - defining and specifying technologies and tools that are used to design intelligent devices; - defining and specifying communication network architecture, communication technologies, cybersecurity requirements, and network management requirements.

  • Standard
    104 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62381:2024(Main)
Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT)
SIST EN IEC 62381:2024

IEC 62381:2024 defines requirements and checklists for the factory acceptance test (FAT), the factory integration test (FIT), the site acceptance test (SAT), and the site integration test (SIT). These tests are carried out to demonstrate that the automation system meets the requirements of the applicable specification. This document provides a means for all parties, including the owner, the buyer, and the vendor, to clearly establish and agree on the scope of activities and responsibilities involved in performing these tests in order to achieve a timely delivery and acceptance of the automation system. The activities specified in this document can be used to develop test plans adapted to the specific requirements of the process/plant/equipment. The annexes of this document contain checklists which are available for consideration when preparing specific test procedures and documentation for a specific automation system. This edition includes the following significant technical changes with respect to the previous edition: a) General re-organization of the standard; b) Current technology incorporated; c) Optional factory integration test (FIT) added; d) Replaced the forms in the annexes with detailed checklists of activities which can be used to develop project-specific test plans; and e) Provided additional references to other applicable standards.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61987-32:2024(Main)
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 32: Lists of properties (LOP) for I/O modules for electronic data exchange
SIST EN IEC 61987-32:2024

IEC 61987-32:2024 This part of IEC 61987 provides an operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for I/O modules and a device list of properties (DLOP) for the description of a range of I/O module types. The structures of the OLOP and the DLOPs correspond to the general structures defined in IEC 61987-11 and agree with the fundamentals for the construction of LOPs defined in IEC 61987-10. Aspects other than the OLOP, needed in different electronic data exchange processes and described in IEC 61987-10 and IEC 61987-11, are published in IEC 61987-92. The locations of the libraries of properties and of blocks used in the LOPs concerned are listed in Annex C and Annex D.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC IEC/TS 62443-1-5:2024(Main)
Security for industrial automation and control systems - Part 1-5: Scheme for IEC 62443 security profiles
SIST-TS CLC IEC/TS 62443-1-5:2024

This part of IEC 62443 specifies a scheme for defining (selecting, writing, drafting, creating) IEC 62443 security profiles. This scheme and its specified requirements apply to IEC 62443 security profiles which are planned to be published as part of the upcoming IEC 62443 dedicated security profiles subseries. IEC 62443 security profiles can support interested parties (e.g. during conformity assessment activities) to achieve comparability of assessed IEC 62443 requirements.

  • Technical specification
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61784-3:2021/A1:2024(Amendment)
Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions
SIST EN IEC 61784-3:2021/A1:2024
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61784-5-8:2024(Main)
Industrial networks - Profiles - Part 5-8: Installation of fieldbuses - Installation profiles for CPF 8
SIST EN IEC 61784-5-8:2024

IEC 61784-5-8:2024 is available as IEC 61784-5-8:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61784-5-8:2024 specifies the installation profiles for CPF 8 (CC-LinkTM[1]). The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2018, IEC 61918:2018/AMD1:2022 and IEC 61918:2018/AMD2:2024. [1] CC-Link™, CC-Link/LT™ and CC‑Link IE™ are trade names of Mitsubishi Electric Co., control of trade name use is given to CCLink Partner Association. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61784-5-19:2024(Main)
Industrial networks - Profiles - Part 5-19: Installation of fieldbuses - Installation profiles for CPF 19
SIST EN IEC 61784-5-19:2024

IEC 61784-5-19:2024 is available as IEC 61784-5-19:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61784-5-19:2024 specifies the installation profile for CPF 19 (MECHATROLINKTM[1]). The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2018, IEC 61918:2018/AMD1:2022 and IEC 61918:2018/AMD2:2024. [1] MECHATROLINKTM and Σ-LINKTM II are trade names of YASKAWA ELECTRIC CORPORATION. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trade names holder or any of its products. Compliance to this profile does not require use of the trade names. Use of the trade name requires permission of the trade name holder.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day