EN 61069-7:2016
(Main)Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety
Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety
The treatment of safety in this standard is confined to hazards that can be present within the industrial-process measurement and control system itself. Considerations of hazards that can be introduced by the process or equipment under control of the industrial-process measurement and control system to be assessed are excluded. If the system mission includes activities which could affect the safety of the process or equipment under control, the requirements of these activities are the subject of IEC 61508.
Leittechnik für industrielle Prozesse - Ermittlung der Systemeigenschaften zum Zweck der Eignungsbeurteilung eines Systems - Teil 7: Eignungsbeurteilung der Sicherheit eines Systems
Mesure, commande et automation dans les processus industriels - Appréciation des propriétés d'un système en vue de son évaluation - Partie 7: Evaluation de la sécurité d'un système
L'IEC 61069-7:2016 spécifie la méthode d'évaluation détaillée de la sécurité d'un système faisant partie d'un système de commande de base (BCS) qui repose sur les principes de base de l'IEC 61069-1 et la méthodologie de l'IEC 61069-2; définit la classification de base de la sécurité d'un système; décrit les facteurs ayant une influence sur la sécurité d'un système et dont il faut tenir compte lors de l'appréciation de la sécurité d'un système; et donne des lignes directrices concernant les techniques de sélection à partir d'un ensemble d'options (avec références) pour l'appréciation de la sécurité d'un système. Cette deuxième édition annule et remplace la première édition parue en 1998. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - réorganisation des informations contenues dans l'IEC 61069-7:1998 visant à mieux organiser l'ensemble complet de normes et à le rendre plus cohérent; - l'IEC TS 62603-1 a été incorporée dans cette édition.
Meritve, krmiljenje in avtomatizacija v industrijskih procesih - Ocenjevanje lastnosti sistema zaradi njegovega vrednotenja - 7. del: Vrednotenje sistema za varnost tveganja (IEC 61069-7:2016)
Obravnavanje varnosti v tem standardu je omejeno na nevarnosti, ki so lahko prisotne pri meritvah in krmiljenju v industrijskih procesih. Izključeno je upoštevanje nevarnosti, ki se lahko pojavijo zaradi postopka ali opreme, ki je pod nadzorom meritev in krmiljenja v industrijskih procesih, ki bodo ovrednoteni. Če misija sistema vključuje dejavnosti, ki bi lahko vplivale na varnost krmiljenega procesa ali opreme, so zahteve teh dejavnosti predmet standarda IEC 61508.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61069-7:2017
01-marec-2017
1DGRPHãþD
SIST EN 61069-7:2001
Meritve, krmiljenje in avtomatizacija v industrijskih procesih - Ocenjevanje
lastnosti sistema zaradi njegovega vrednotenja - 7. del: Vrednotenje sistema za
varnost tveganja (IEC 61069-7:2016)
,QGXVWULDOSURFHVVPHDVXUHPHQWFRQWURODQGDXWRPDWLRQ(YDOXDWLRQRIV\VWHP
SURSHUWLHVIRUWKHSXUSRVHRIV\VWHPDVVHVVPHQW3DUW $VVHVVPHQWRIV\VWHPVDIHW\
,(&
Leittechnik für industrielle Prozesse - Ermittlung der Systemeigenschaften zum Zweck
der Eignungsbeurteilung eines Systems - Teil 7: Eignungsbeurteilung der Sicherheit
eines Systems (IEC 61069-7:2016)
Mesure, commande et automation dans les processus industriels - Appréciation des
propriétés d'un sytème en vue de son évaluation - Partie 7: Evaluation de la sécurité d'un
système (IEC 61069-7:2016)
Ta slovenski standard je istoveten z: EN 61069-7:2016
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN 61069-7:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61069-7:2017
---------------------- Page: 2 ----------------------
SIST EN 61069-7:2017
EUROPEAN STANDARD EN 61069-7
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2016
ICS 25.040.40 Supersedes EN 61069-7:1999
English Version
Industrial-process measurement, control and automation -
Evaluation of system properties for the purpose of system
assessment - Part 7: Assessment of system safety
(IEC 61069-7:2016)
Mesure, commande et automation dans les processus Leittechnik für industrielle Prozesse - Ermittlung der
industriels - Appréciation des propriétés d'un sytème en vue Systemeigenschaften zum Zweck der Eignungsbeurteilung
de son évaluation - Partie 7: Evaluation de la sécurité d'un eines Systems - Teil 7: Eignungsbeurteilung der Sicherheit
système eines Systems
(IEC 61069-7:2016) (IEC 61069-7:2016)
This European Standard was approved by CENELEC on 2016-07-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61069-7:2016 E
---------------------- Page: 3 ----------------------
SIST EN 61069-7:2017
EN 61069-7:2016
European foreword
The text of document 65A/795/FDIS, future edition 2 of IEC 61069-7, prepared by SC 65A "System
aspects", of IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61069-7:2016.
The following dates are fixed:
(dop) 2017-04-20
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-07-20
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 61069-7:1999.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61069-7:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60243 NOTE Harmonized in EN 60243 series.
IEC 60529 NOTE Harmonized as EN 60529.
IEC 60695-2 NOTE Harmonized in EN 60695-2 series.
IEC 6
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.