EN 60512-26-100:2008

Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

IEC 60512-26-100:2008 specifies the test and measurements and the related measurement setup and reference arrangements for interoperability and backward compatibility tests for the development and qualification of 8-way, free and fixed connectors for data transmission. The following test methods are provided: insertion loss, test 26a; return loss, test 26b; near-end crosstalk (NEXT), test 26c; far-end crosstalk (FEXT), test 26d; transfer impedance, test 26e; transverse conversion loss (TCL), test 26f; transverse conversion transfer loss (TCTL), test 26g.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 26-100: Messaufbau, Prüf- und Referenzanordnung und Messverfahren für Steckverbinder nach IEC 60603-7 - Prüfungen 26a bis 26g

Connecteurs pour équipements électroniques - Essais et mesures - Partie 26-100: Montage de mesure, dispositifs d'essai et de référence et mesures pour les connecteurs conformes à la CEI 60603-7 - Essais 26a à 26g

La CEI 60512-26-100:2008 spécifie les essais et mesures ainsi que le montage de mesure et les dispositifs de référence associés pour les essais d'interopérabilité et de compatibilité amont pour le développement et la qualification des embases et des fiches à 8 voies pour la transmissions des données. Les méthodes d'essai suivantes sont spécifiées: perte d'insertion, essai 26a; affaiblissement de réflexion, essai 26b; paradiaphonie, essai 26c; télédiaphonie, essai 26d; impédance de transfert, essai 26e; perte de conversion transverse, essai 26f; perte de transfert de conversion transverse, essai 26g.

Konektorji za elektronsko opremo - Preskušanje in meritve - 26-100. del: Merilna postavitev, določitev preskusov in referenc ter meritve konektorjev v skladu z IEC 60603-7 - Preskusi od 26a do 26g (IEC 60512-26-100:2008)

General Information

• Status: Published
• Publication Date: 23-Oct-2008
• Withdrawal Date: 30-Sep-2011
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 24-Oct-2008
• Completion Date: 24-Oct-2008
• Ref Project: SIST EN 60512-26-100:2008 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (IEC 60512-26-100:2008)

Relations

• Amended By: EN 60512-26-100:2008/A1:2011 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60512-26-100:2008
01-december-2008
.RQHNWRUML]DHOHNWURQVNRRSUHPR3UHVNXãDQMHLQPHULWYHGHO0HULOQD
SRVWDYLWHYGRORþLWHYSUHVNXVRYLQUHIHUHQFWHUPHULWYHNRQHNWRUMHYYVNODGX],(&
3UHVNXVLRGDGRJ,(&
Connectors for electronic equipment - Tests and measurements - Part 26-100:
Measurement setup, test and reference arrangements and measurements for connectors
according to IEC 60603-7 - Tests 26a to 26g (IEC 60512-26-100:2008)
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 26-100:
Messaufbau, Prüf- und Referenzanordnung und Messverfahren für Steckverbinder nach
IEC 60603 7 -Prüfungen 26a bis 26g (IEC 60512-26-100:2008)
Connecteurs pour équipements électroniques - Essais et mesures - Partie 26-100:
Montage de mesure, dispositifs d'essai et de référence et mesures pour les connecteurs
conformes à la CEI 60603-7 - Essais 26a à 26g (CEI 60512-26-100:2008)
Ta slovenski standard je istoveten z: EN 60512-26-100:2008
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60512-26-100:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60512-26-100:2008

---------------------- Page: 2 ----------------------

SIST EN 60512-26-100:2008

EUROPEAN STANDARD
EN 60512-26-100

NORME EUROPÉENNE
October 2008
EUROPÄISCHE NORM

ICS 31.220.10

English version


Connectors for electronic equipment -
Tests and measurements -
Part 26-100: Measurement setup, test and reference arrangements
and measurements for connectors according to IEC 60603-7 -
Tests 26a to 26g
(IEC 60512-26-100:2008)


Connecteurs  Steckverbinder
pour équipements électroniques - für elektronische Einrichtungen -
Essais et mesures - Mess- und Prüfverfahren -
Partie 26-100: Montage de mesure, Teil 26-100: Messaufbau,
dispositifs d'essai et de référence Prüf- und Referenzanordnung
et mesures pour les connecteurs und Messverfahren für Steckverbinder
conformes à la CEI 60603-7 - nach IEC 60603-7 -
Essais 26a à 26g Prüfungen 26a bis 26g
(CEI 60512-26-100:2008) (IEC 60512-26-100:2008)


This European Standard was approved by CENELEC on 2008-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-26-100:2008 E

---------------------- Page: 3 ----------------------

SIST EN 60512-26-100:2008
EN 60512-26-100:2008 - 2 -
Foreword
The text of document 48B/1892/FDIS, future edition 1 of IEC 60512-26-100, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-26-100 on 2008-10-01.
This European Standard cancels and replaces the annexes of EN 60603-7-x documents dealing with
transmission characteristics for interoperability and backward compatibility.
This standard is to be read in conjunction with EN 60512-1 and EN 60512-1-100 which explains the
structure of the EN 60512 series.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2009-07-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-10-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60512-26-100:2008 was approved by CE
...