EN 61083-2:1997

Digital recorders for measurements in high-voltage impulse tests - Part 2: Evaluation of software used for the determination of the parameters of impulse waveforms

Is applicable to the processing of records taken by digital recorders used for measurements during tests with high-voltage impulses and high current impulses as specified in HD 588/EN 60060 series. It specifies the test procedures to be applied to assess the accuracy of software used to process and read the records of impulses and calibration signals.

Digitalrecorder für Stoßspannungs- und Stoßstromprüfungen - Teil 2: Bewertung von Software zur Bestimmung der Parameter von Stoßspannungen

Enregistreurs numériques pour les mesures pendant les essais de choc à haute tension - Partie 2: Evaluation du logiciel utilisé pour obtenir les paramètres des formes d'onde de choc

Est applicable au traitement numérique d'enregistrements obtenus par les enregistreurs numériques utilisés pour les mesures pendant les essais de choc mettant en oeuvre des tensions élevées ou de forts courants, comme spécifié dans la série HD 588/EN 60060. Elle prescrit les procédures d'essai à appliquer pour s'assurer de la précision du logiciel utilisé pour traiter et lire des enregistrements de chocs et des signaux de calibration.

Digital recorders for measurements in high- voltage impulse tests - Part 2: Evaluation of software used for the determination of the parameters of impulse waveforms (IEC 61083-2:1996)

General Information

• Status: Withdrawn
• Publication Date: 16-Jan-1997
• Withdrawal Date: 31-Aug-1997
• ICS: 17.220.20 - Measurement of electrical and magnetic quantities
• Technical Committee: CLC/SR 42 - High-voltage testing techniques
• Drafting Committee: IEC/TC 42 - IEC_TC_42
• Parallel Committee: IEC/TC 42 - IEC_TC_42
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 24-Apr-2016
• Completion Date: 24-Apr-2016
• Ref Project: SIST EN 61083-2:1998 - Digital recorders for measurements in high-voltage impulse tests -- Part 2: Evaluation of software used for the determination of the parameters of impulse waveforms

Relations

• Replaced By: EN 61083-2:2013 - Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61083-2:1998
01-januar-1998
Digital recorders for measurements in high- voltage impulse tests - Part 2:
Evaluation of software used for the determination of the parameters of impulse
waveforms (IEC 61083-2:1996)
Digital recorders for measurements in high-voltage impulse tests -- Part 2: Evaluation of
software used for the determination of the parameters of impulse waveforms
Digitalrecorder für Stoßspannungs- und Stoßstromprüfungen -- Teil 2: Bewertung von
Software zur Bestimmung der Parameter von Stoßspannungen
Enregistreurs numériques pour les mesures pendant les essais de choc à haute tension
-- Partie 2: Evaluation du logiciel utilisé pour obtenir les paramètres des formes d'onde
de choc
Ta slovenski standard je istoveten z: EN 61083-2:1997
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
SIST EN 61083-2:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61083-2:1998

---------------------- Page: 2 ----------------------

SIST EN 61083-2:1998

---------------------- Page: 3 ----------------------

SIST EN 61083-2:1998

---------------------- Page: 4 ----------------------

SIST EN 61083-2:1998

---------------------- Page: 5 ----------------------

SIST EN 61083-2:1998

---------------------- Page: 6 ----------------------

SIST EN 61083-2:1998
NORME CEI
INTERNATIONALE
IEC
1083-2
INTERNATIONAL
Première édition
STANDARD
First edition
1996-07
Enregistreurs numériques pour les mesures
pendant les essais de choc à haute tension –
Partie 2:
Evaluation du logiciel utilisé pour obtenir
les paramètres des formes d'onde de choc
Digital recorders for measurements
in high-voltage impulse tests –
Part 2:
Evaluation of software used for the determination
of the parameters of impulse waveforms
© CEI 1996 Droits de reproduction réservés — Copyright - all rights reserved
de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized
Aucune partie
utilisée quelque forme que ce soit et par aucun procédé, in any form or by any means, electronic or mechanical,
sous
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without
microfilms, sans l'accord écrit de l'éditeur. permission in writing from the publisher
Bureau central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève, Suisse
CODE PRIX ^+
Commission Electrotechnique Internationale
PRICE CODE ^7
International Electrotechnical Commission
IEC
MermayHapotnian 3neKrporexHwlecHaR HOMHCCHR
• Pour prix, voir catalogue en vigueur
•
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 61083-2:1998
– 3 –
1083-2 © IEC:1996
CONTENTS
Page
FOREWORD 5
7
INTRODUCTION
Clause
9
1 Scope
9
2 Normative references
3 Definitions 11
4 Test data generator (TDG) 13
13
5 Software validation
13
5.1 Test procedure
15
5.2 Evaluation procedure
17
5.3 Data format
17
5.4 Setting characteristics
17
5.5 Application
17
6 Classification and prescribed limits of the reference waveforms
17
6.1 Classification into waveform groups
19
6.2 Specified limits of the parameters of the reference waveforms
7 Record of performance 21
23
8 Performance check
23
8.1 Performance check for user-developed software
8.2 Performance check for compiled code and firmware 23
23
9 Use of processed data
Annexes
25
A Examples of reference waveforms
35
B Test data generator (description of the IEC-TDG software)
39
C Switching impulses – time to peak

---------------------- Page: 8 ----------------------

SIST EN 61083-2:1998
1083-2 © IEC:1996 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
DIGITAL RECORDERS FOR MEASUREMENTS IN
HIGH-VOLTAGE IMPULSE TESTS —
Part 2: Evaluation of software used for the determination of
the parameters of impulse waveforms
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international co-operation on all questions concerning standardization in the electrical and electronic
fields. To this end and in addition to other activities, the IEC publishes International Standards. Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt
with may participate in this preparatory work. International, governmental and non-governmental
organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the
International Organization for Standardization (ISO) in accordance with conditions determined by agreement
between the two organizations.
2) The formal decisions or agreements of the IEC on technica
...