Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR)

IEC 62439-3:2012 specifies two redundancy protocols designed to provide seamless recovery in case of single failure of an inter-bridge link or bridge in the network, which are based on the same scheme: duplication of the LAN, resp. duplication of the transmitted information. This second edition cancels and replaces the first edition published in 2010. It constitutes a technical revision. The main changes with respect to the previous edition are: - specification of the interconnection of PRP and HSR networks; - introduction of a suffix for PRP frames; - clarification and modification of specifications to ensure interoperability; - slackening of the specifications to allow different implementations; - consideration of clock synchronization according to IEC 61588; - introduction of test modes to simplify testing and maintenance.

Industrielle Kommunikationsnetze - Hochverfügbare Automatisierungsnetze - Teil 3: Parallelredundanz-Protokoll (PRP) und nahtloser Hochverfügbarkeits-Ring (HSR)

Réseaux industriels de communication - Réseaux d’automatisme à haute disponibilité - Partie 3 : Protocole de redondance parallèle (PRP) et redondance transparente de haute disponibilité (HSR)

La CEI 62439-3:2012 spécifie deux protocoles de redondance conçus pour assurer une reprise transparente en cas de défaillance unique d'une maille inter-étage ou d'un pont au sein du réseau, qui reposent sur le même schéma: duplication du réseau local, duplication des informations transmises. Cette deuxième édition annule et remplace la première édition parue en 2010. Elle constitue une révision technique. Les principales modifications apportées à l'édition précédente sont: - spécification de l'interconnexion des réseaux PRP et HSR; - introduction d'un suffixe pour les trames PRP; - clarification et modification des spécifications pour garantir l'interopérabilité; - assouplissement des spécifications pour permettre des mises en oeuvre différentes; - prise en compte de la synchronisation des horloges conformément à la CEI 61588; - introduction de modes d'essai visant à simplifier les essais et la maintenance.

Industrijska komunikacijska omrežja za avtomatizacijo z visoko razpoložljivostjo - 3. del: Protokol vzporedne redundance (RPR) in brezprehodna zanka z visoko razpoložljivostjo (IEC 62439-3:2012)

Serija IEC 62439 se uporablja za avtomatizacijska omrežja z veliko razpoložljivostjo, ki temeljijo na tehnologiji iz standarda ISO/IEC 8802-3 (Ethernet). Ta del standarda IEC 62439 določa dva protokola redundance, zasnovana za zagotavljanje hitre obnovitve v primeru izpada ene medmostne povezave ali mostu v omrežju, ki temelji na isti shemi: podvojevanje LAN oziroma podvojevanje oddajanih informacij.

General Information

Status
Withdrawn
Publication Date
20-Sep-2012
Withdrawal Date
08-Aug-2015
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
02-Feb-2021
Completion Date
02-Feb-2021

Relations

Buy Standard

Standard
EN 62439-3:2012
English language
87 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2012
1DGRPHãþD
SIST EN 62439-3:2010
Industrijska komunikacijska omrežja za avtomatizacijo z visoko razpoložljivostjo -
3. del: Protokol vzporedne redundance (RPR) in brezprehodna zanka z visoko
razpoložljivostjo (IEC 62439-3:2012)
Industrial communication networks - High availability automation networks - Part 3:
Parallel Redundancy Protocol (PRP) and High availability Seamless Redundancy (HSR)
(IEC 62439-3:2012)
Industrielle Kommunikationsnetze: Hochverfügbare Automatisierungsnetze - Teil 3:
Parallelredundanz-Protokoll (PRP) und nahtloser Hochverfügbarkeits-Ring (HSR) (IEC
62439-3:2012)
Réseaux de communication industrielle - Réseaux d’automatisme à haute disponibilité -
Partie 3 : Protocole de redondance parallèle (PRP) et redondance transparente de haute
disponibilité (HSR) (CEI 62439-3:2012)
Ta slovenski standard je istoveten z: EN 62439-3:2012
ICS:
25.040.01 Sistemi za avtomatizacijo v Industrial automation
industriji na splošno systems in general
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62439-3
NORME EUROPÉENNE
September 2012
EUROPÄISCHE NORM
ICS 25.040; 35.040 Supersedes EN 62439-3:2010

English version
Industrial communication networks -
High availability automation networks -
Part 3: Parallel Redundancy Protocol (PRP) and High-availability
Seamless Redundancy (HSR)
(IEC 62439-3:2012)
Réseaux industriels de communication -  Industrielle Kommunikationsnetze -
Réseaux d’automatisme à haute Hochverfügbare Automatisierungsnetze -
disponibilité - Teil 3: Parallelredundanz-Protokoll (PRP)
Partie 3 : Protocole de redondance und nahtloser Hochverfügbarkeits-Ring
parallèle (PRP) et redondance (HSR)
transparente de haute disponibilité (HSR) (IEC 62439-3:2012)
(CEI 62439-3:2012)
This European Standard was approved by CENELEC on 2012-08-09. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62439-3:2012 E
Foreword
The text of document 65C/687/FDIS, future edition 2 of IEC 62439-3, prepared by SC 65C, "Industrial
networks", of IEC TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62439-3:2012.

The following dates are fixed:
(dop) 2013-05-09
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-08-09
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62439-3:2010.
– specification of the interconnection of PRP and HSR networks;
– introduction of a suffix for PRP frames;
– clarification and modification of specifications to ensure interoperability;
– slackening of the specifications to allow different implementations;
– consideration of clock synchronization according to IEC 61588;
– introduction of test modes to simplify testing and maintenance.
This standard is to be used in conjunction with EN 62439-1:2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62439-3:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61580 series NOTE  Harmonized in EN 61580 series (not modified).

- 3 - EN 62439-3:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60050-191 - International Electrotechnical Vocabulary - -
(IEV) -
Chapter 191: Dependability and quality of
service
IEC 61588 - Precision clock synchronization protocol for - -
networked measurement and control systems

IEC 62439-1 - Industrial communication networks - High EN 62439-1 -
availability automation networks -
Part 1: General concepts and calculation
methods
IEC 62439-2 - Industrial communication networks - High EN 62439-2 -
availability automation networks -
Part 2: Media Redundancy Protocol (MRP)

IEC 62439-6 - Industrial communication networks - High EN 62439-6 -
availability automation networks -
Part 6: Distributed Redundancy Protocol
(DRP)
IEC 62439-7 - Industrial communication networks - High EN 62439-7 -
availability automation networks -
Part 7: Ring-based Redundancy Protocol
(RRP)
ISO/IEC 8802-3 2000 Information technology - Telecommunications - -
and information exchange between systems -
Local and metropolitan area networks -
Specific requirements -
Part 3: Carrier sense multiple access with
collision detection (CSMA/CD) access method
and physical layer specifications

IEEE 802.1D 2004 IEEE Standard for Local and Metropolitan - -
Area Networks - Media Access Control (MAC)
Bridges
IEEE 802.1Q 2011 IEEE Standard for Local and Metropolitan - -
Area Networks - Virtual Bridged Local Area
Networks
IEC 62439-3 ®
Edition 2.0 2012-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – High availability automation networks –

Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless

Redundancy (HSR)
Réseaux industriels de communication – Réseaux d'automatisme à haute

disponibilité –
Partie 3: Protocole de redondance parallèle (PRP) et redondance transparente de

haute disponibilité (HSR)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XC
ICS 25.040; 35.040 ISBN 978-2-83220-160-2

– 2 – 62439-3 © IEC:2012
CONTENTS
FOREWORD . 5
0 INTRODUCTION . 7
0.1 General . 7
0.2 Changes with respect to the previous edition . 7
0.3 Patent declaration . 8
1 Scope . 9
2 Normative references . 9
3 Terms, definitions, abbreviations, acronyms, and conventions . 10
3.1 Terms and definitions . 10
3.2 Abbreviations and acronyms . 10
3.3 Conventions . 10
4 Parallel Redundancy Protocol (PRP) . 10
4.1 PRP principle of operation . 10
4.1.1 PRP network topology . 10
4.1.2 PRP LANs with linear or bus topology . 11
4.1.3 PRP LANs with ring topology . 12
4.1.4 DANP node structure . 12
4.1.5 PRP attachment of singly attached nodes . 13
4.1.6 Compatibility between singly and doubly attached nodes . 14
4.1.7 Network management . 14
4.1.8 Implication on configuration . 14
4.1.9 Transition to non-redundant networks . 14
4.1.10 Duplicate handling . 15
4.1.11 Network supervision . 19
4.1.12 Redundancy management interface . 19
4.2 PRP protocol specifications . 19
4.2.1 Installation, configuration and repair guidelines . 19
4.2.2 MAC addresses . 20
4.2.3 Multicast MAC addresses . 20
4.2.4 IP addresses . 20
4.2.5 Nodes . 20
4.2.6 Duplicate Accept mode (testing only) . 21
4.2.7 Duplicate Discard mode . 21
4.3 PRP_Supervision frame . 24
4.3.1 Supervision frame for DANP . 24
4.3.2 PRP_Supervision frame contents . 27
4.3.3 PRP_Supervision frame for RedBox . 27
4.3.4 Reception of a PRP_Supervision frame and NodesTable . 27
4.4 Bridging node . 28
4.5 Constants . 28
4.6 PRP service specification . 28
5 High-availability Seamless Redundancy (HSR) . 28
5.1 HSR objectives . 28
5.2 HSR principle of operation . 29
5.2.1 Basic operation with a ring topology . 29
5.2.2 DANH node structure . 30

62439-3 © IEC:2012 – 3 –
5.2.3 Topology . 31
5.2.4 RedBox structure . 39
5.3 HSR node specifications . 41
5.3.1 HSR operation . 41
5.3.2 DANH receiving from its link layer interface . 41
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.