EN IEC 62988:2022
(Main)Nuclear power plants - Instrumentation and control systems important to safety - Selection and use of wireless devices
Nuclear power plants - Instrumentation and control systems important to safety - Selection and use of wireless devices
See the scope of IEC 62988:2018. Adoption of IEC 62988:2018 is to be done without modification.
Kernkraftwerke - Sicherheitstechnisch wichtige leittechnische Systeme - Auswahl und Einsatz drahtloser Geräte
Centrales nucléaires de puissance - Systèmes d'instrumentation et de contrôle-commande importants pour la sûreté - Sélection et utilisation des appareils sans fil
L'IEC 62988:2018 établit les exigences applicables pour la sélection et l’utilisation des appareils sans fil intégrés dans les systèmes d’instrumentation et de contrôle-commande (I&C) importants pour la sûreté employés dans les centrales nucléaires de puissance (CNP). Ces systèmes d’I&C peuvent être intégralement constitués d’appareils sans fil. Le présent document est applicable pour la construction des nouvelles CNP et pour la rénovation de l’I&C sur les CNP existantes. Tous les appareils sans fil ou les systèmes sans fil importants pour la sûreté relèvent du domaine du présent document. Les appareils fixes comme les appareils mobiles et tous les types de données (voix, données du procédé, etc.) sont couverts par le domaine du présent document s’ils réalisent une fonction classée de sûreté. Le présent document restreint l’utilisation des appareils sans fil aux systèmes réalisant des fonctions de sûreté de catégorie C telle que définie par l’IEC 61226, et exclut explicitement leur utilisation pour les catégories A et B. On peut utiliser le présent document comme un guide pour les appareils et les systèmes non classés de sûreté, par exemple pour s’assurer que les appareils importants pour la sûreté ne sont pas perturbés.
Jedrske elektrarne - Merilna in nadzorna oprema za zagotavljanje varnosti - Izbira in uporaba brezžičnih naprav (IEC 62988:2018)
Ta dokument določa zahteve v zvezi z izbiro in uporabo brezžičnih naprav pri merilni in nadzorni opremi (I&C), ki so pomembne za zagotavljanje varnosti in se uporabljajo v jedrskih elektrarnah (NPP). To merilno in nadzorno opremo lahko sestavljajo izključno brezžične naprave. OPOMBA: Beseda »uporaba« se navezuje na integracijo naprave, njeno primernost, upravni nadzor in vse druge dejavnosti, ki so lahko potrebne za uporabo naprave za zagotavljanje varnosti. Ta dokument se uporablja za merilno in nadzorno opremo novih jedrskih elektrarn ter za nadgradnjo merilne in nadzorne opreme v obstoječih jedrskih elektrarnah. Ta dokument zajema vse brezžične naprave in opremo, ki so pomembni za zagotavljanje varnosti. Njegovo področje uporabe vključuje tako fiksne kot prenosne naprave in vse vrste podatkov (glasovni podatki, procesni podatki itd.), ki opravljajo varnostno funkcijo. Ta dokument omejuje uporabo brezžičnih naprav na opremo, ki podpirajo funkcije kategorije C v skladu s standardom IEC 61226, in izrecno izključuje njihovo uporabo za kategoriji A in B. Ta dokument se lahko uporablja tudi kot smernica za naprave in opremo, ki niso varnostni, na primer za preprečevanje motenj pri varnostnih napravah. – Točka 5 vsebuje opis glavnih zahtev glede varnosti in kibernetske varnosti. – Točka 6 določa posebne zahteve za brezžične naprave, ki jih je treba vključiti v zasnovo sistema. – Točka 7 vsebuje opis zahtev za izbiro in integracijo brezžičnih naprav. – Točka 8 obravnava elektromagnetno združljivost in upravljanje spektra. – Točka 9 določa zahteve glede kibernetske varnosti za brezžične naprave. – Točka 10 vsebuje opis zahtev na področju primernosti brezžičnih naprav in njihovega okolja.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2022
Jedrske elektrarne - Merilna in nadzorna oprema za zagotavljanje varnosti - Izbira
in uporaba brezžičnih naprav (IEC 62988:2018)
Nuclear power plants - Instrumentation and control systems important to safety -
Selection and use of wireless devices (IEC 62988:2018)
Kernkraftwerke - Leittechnische Systeme mit sicherheitstechnischer Bedeutung -
Auswahl und Einsatz drahtloser Geräte (IEC 62988:2018)
Centrales nucléaires de puissance - Systèmes d'instrumentation et de contrôle-
commande importants pour la sûreté - Sélection et utilisation des appareils sans fil (IEC
62988:2018)
Ta slovenski standard je istoveten z: EN IEC 62988:2022
ICS:
27.120.20 Jedrske elektrarne. Varnost Nuclear power plants. Safety
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62988
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2022
ICS 27.120.20
English Version
Nuclear power plants - Instrumentation and control systems
important to safety - Selection and use of wireless devices
(IEC 62988:2018)
Centrales nucléaires de puissance - Systèmes Kernkraftwerke - Leittechnische Systeme mit
d'instrumentation et de contrôle-commande importants pour sicherheitstechnischer Bedeutung - Auswahl und Einsatz
la sûreté - Sélection et utilisation des appareils sans fil drahtloser Geräte
(IEC 62988:2018) (IEC 62988:2018)
This European Standard was approved by CENELEC on 2022-08-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62988:2022 E
European foreword
This document (EN IEC 62988:2022) consists of the text of document IEC 62988:2018, prepared by
IEC/TC 45 "Instrumentation, control and electrical power systems of nuclear facilities"
The following dates are fixed:
• latest date by which this document has to be (dop) 2023-08-08
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2025-08-08
conflicting with this document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN-CENELEC shall not be held responsible for identifying any or all such patent rights.
As stated in the nuclear safety directive 2009/71/EURATOM, Chapter 1, Article 2, item 2, Member States
are not prevented from taking more stringent safety measures in the subject-matter covered by the
Directive, in compliance with Community law.
In a similar manner, this European standard does not prevent Member States from taking more stringent
nuclear safety and/or security measures in the subject-matter covered by this standard.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN and CENELEC
websites.
Endorsement notice
The text of the International Standard IEC 62988:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61000-4-3 NOTE Harmonized as EN IEC 61000-4-3
IEC 61226 NOTE Harmonized as EN IEC 61226
IEC 62003 NOTE Harmonized as EN IEC 62003
IEC 62657-1:2017 NOTE Harmonized as EN 62657-1:2017 (not modified)
IEC 62657-2:2017 NOTE Harmonized as EN 62657-2:2017 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60987 2007 Nuclear power plants - Instrumentation and EN 60987 2015
control important to safety - Hardware
design requirements for computer-based
systems
IEC 61513 2011 Nuclear power plants - Instrumentation and EN 61513 2013
control important to safety - General
requirements for systems
IEC 62138 - Nuclear power plants - Instrumentation and EN IEC 62138 -
control systems important to safety -
Software aspects for computer-based
systems performing category B or C
functions
IEC 62645 - Nuclear power plants - Instrumentation, EN IEC 62645 -
control and electrical power systems -
Cybersecurity requirements
IEC 62671 - Nuclear power plants - Instrumentation and - -
control important to safety - Selection and
use of industrial digital devices of limited
functionality
IEC/IEEE 60780-323 - Nuclear facilities - Electrical equipment EN 60780-323 -
important to safety - Qualification
IEC 62988 ®
Edition 1.0 2018-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Nuclear power plants – Instrumentation and control systems important to
safety – Selection and use of wireless devices
Centrales nucléaires de puissance – Systèmes d’instrumentation et de contrôle-
commande importants pour la sûreté – Sélection et utilisation des appareils
sans fil
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.120.20 ISBN 978-2-8322-5655-8
– 2 – IEC 62988:2018 © IEC 2018
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Symbols and abbreviations . 11
5 Fundamental requirements . 11
5.1 Safety classification . 11
5.2 Physical separation and isolation . 11
5.3 Cybersecurity . 12
6 Wireless application: system requirements . 12
6.1 General . 12
6.2 Network architecture . 12
6.3 Network performance . 12
6.4 Network surveillance and monitoring . 12
6.5 Power supply requirements . 13
6.6 Physical security . 13
6.7 Electromagnetic security . 13
7 Device selection: evidence of correctness and device integration . 13
7.1 General . 13
7.2 Quality assurance . 13
7.3 Functional and performance suitability . 14
7.4 Integration into the application . 14
7.5 Device self-monitoring . 14
7.6 Solution preferences . 14
8 Radio emissions . 14
8.1 Electromagnetic compatibility . 14
8.2 Radio coverage requirements . 15
8.3 Spectrum management . 15
8.3.1 General . 15
8.3.2 Flexibility . 15
8.3.3 Mobility . 16
9 Cybersecurity . 16
9.1 General requirements . 16
9.2 Wireless-specific requirements . 16
9.2.1 Data logging . 16
9.2.2 Site topology . 16
9.2.3 Connection to a wired network . 16
9.2.4 Network surveillance . 16
10 Qualification . 17
10.1 Hardware qualification . 17
10.2 Software qualification . 17
11 Documentation . 17
Bibliography . 18
IEC 62988:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
NUCLEAR POWER PLANTS – INSTRUMENTATION AND CONTROL
SYSTEMS IMPORTANT TO SAFETY – SELECTION
AND USE OF WIRELESS DEVICES
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.