EN 62005-7:2004
(Main)Reliability of fibre optic interconnecting devices and passive optical components - Part 7: Life stress modeling
Reliability of fibre optic interconnecting devices and passive optical components - Part 7: Life stress modeling
Describes a common set of procedures for estimating the reliability of fibre optic connectors, splices, branching devices and other passive components. This part specifically deals with component reliability as estimated from life tests which are accelerated in some manner as in the example of EN 62005-2.
Zuverlässigkeit von LWL-Verbindungselementen und passiven LWL-Bauteilen - Teil 7: Beanspruchungsmodelle
Fiabilité des dispositifs d'interconnexion et des composants optiques passifs à fibres optiques - Partie 7: Modélisation de contrainte de durée de vie
Describes a common set of procedures for estimating the reliability of fibre optic connectors, splices, branching devices and other passive components. This part specifically deals with component reliability as estimated from life tests which are accelerated in some manner as in the example of EN 62005-2.
Zanesljivost povezovalnih naprav z optičnimi vlakni in pasivnih optičnih komponent – 7. del: Modeliranje dolgotrajnih preobremenitev (IEC 62005-7:2004)
General Information
Standards Content (Sample)
SLOVENSKI SIST EN 62005-7:2005
STANDARD
februar 2005
Zanesljivost povezovalnih naprav z optičnimi vlakni in pasivnih optičnih
komponent – 7. del: Modeliranje dolgotrajnih preobremenitev (IEC 62005-
7:2004)
Reliability of fibre optic interconnecting devices and passive optical components -
Part 7: Life stress modeling (IEC 62005-7:2004)
ICS 33.180.20 Referenčna številka
SIST EN 62005-7:2005(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 62005-7
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2004
ICS 33.180.20
English version
Reliability of fibre optic interconnecting devices
and passive optical components
Part 7: Life stress modeling
(IEC 62005-7:2004)
Fiabilité des dispositifs d'interconnexion Zuverlässigkeit von
et des composants optiques passifs LWL-Verbindungselementen
à fibres optiques und passiven LWL-Bauteilen
Partie 7: Modélisation de contrainte Teil 7: Beanspruchungsmodelle
de durée de vie (IEC 62005-7:2004)
(CEI 62005-7:2004)
This European Standard was approved by CENELEC on 2004-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62005-7:2004 E
---------------------- Page: 2 ----------------------
EN 62005-7:2004 - 2 -
Foreword
The text of document 86B/1896/FDIS, future edition 1 of IEC 62005-7, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62005-7 on 2004-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62005-7:2004 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62005-1 NOTE Harmonized as EN 62005-1:2001 (not modified).
__________
---------------------- Page: 3 ----------------------
- 3 - EN 62005-7:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 62005-2 2001 Reliability of fibre optic interconnecting EN 62005-2 2001
devices and passive components
Part 2: Quantitative assessment of
reliability based on accelerated ageing
tests - Temperature and humidity; steady
state
IEC 62005-3 2001 Part 3: Relevant tests for evaluating EN 62005-3 2001
failure modes and failure mechanisms for
passive components
---------------------- Page: 4 ----------------------
NORME CEI
INTERNATIONALE
IEC
62005-7
INTERNATIONAL
Première édition
STANDARD
First edition
2004-01
Fiabilité des dispositifs d'interconnexion
et des composants optiques passifs
à fibres optiques –
Partie 7:
Modé
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.