EN 62024-1:2002

High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor

Specifies electrical characteristics and measuring methods for the nanohenry range chip inductor that is normally used in the high frequency (over 100 kHz) range.

Induktive Hochfrequenzbauelemente - Elektrische Eigenschaften und Messmethoden - Teil 1: Chipinduktivitäten im Nanohenry-Bereich

Composants inductifs à haute fréquence - Caractéristiques électriques et méthodes de mesure - Partie 1: Inductance pastille de l'ordre du nanohenry

Spécifie les caractéristiques électriques et les méthodes de mesure pour l'inductance pastille de l'ordre du nanohenry qui est normalement utilisée dans la gamme de hautes fréquences (supérieure à 100 kHz).

High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor (IEC 62024-1:2002)

General Information

• Status: Withdrawn
• Publication Date: 01-Aug-2002
• Withdrawal Date: 30-Jun-2005
• ICS: 29.100.10 - Magnetic components
• Technical Committee: CLC/SR 51 - Magnetic components and ferrite materials
• Drafting Committee: IEC/TC 51 - IEC_TC_51
• Parallel Committee: IEC/TC 51 - IEC_TC_51
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Mar-2011
• Completion Date: 01-Mar-2011
• Ref Project: SIST EN 62024-1:2004 - High frequency inductive components - Electrical characteristics and measuring methods -- Part 1: Nanohenry range chip inductor

Relations

• Replaced By: EN 62024-1:2008 - High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 62024-1:2004

STANDARD
julij 2004
High frequency inductive components - Electrical characteristics and measuring
methods - Part 1: Nanohenry range chip inductor (IEC 62024-1:2002)
ICS 29.100.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 62024-1
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2002
ICS 29.100.10
English version
High frequency inductive components -
Electrical characteristics and measuring methods
Part 1: Nanohenry range chip inductor
(IEC 62024-1:2002)
Composants inductifs à haute fréquence - Induktive Hochfrequenzbauelemente -
Caractéristiques électriques Elektrische Eigenschaften
et méthodes de mesure und Messmethoden
Partie 1: Inductance pastille Teil 1: Chipinduktivitäten
de l'ordre du nanohenry im Nanohenry-Bereich
(CEI 62024-1:2002) (IEC 62024-1:2002)
This European Standard was approved by CENELEC on 2002-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means rese
...