Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements

IEC 61158-6-12:2014 defines the protocol provided to define the wire-representation of the service primitives defined in IEC 61158-5-12, and define the externally visible behavior associated with their transfer. This standard specifies the protocol of the Type 12 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This third edition cancels and replaces the second edition published in 2010 and constitutes a technical revision. The main changes are: - bug fixes; - editorial improvements; - support of Explicit Device Identification added in ESM.

Industrielle Kommunikationsnetze - Feldbusse - Teil 6-12: Protokollspezifikation des Application Layer (Anwendungsschicht) - Typ 12-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-12: Spécification du protocole de la couche application - Eléments de type 12

L'IEC 61158-6-12:2014 décrit le protocole mis en place pour définir la représentation filaire des primitives de service définies dans la CEI 61158-5-12 et définir le comportement visible de l'extérieur associé à leur transfert. La présente norme spécifie le protocole de la couche application de bus de terrain de Type 12, en conformité avec le modèle de référence de base OSI (ISO/CEI 7498-1) et la structure de la couche application OSI (ISO/CEI 9545). Cette troisième édition annule et remplace la deuxième édition parue en 2010. Elle constitue une révision technique. Les principales modifications sont: - réparations des erreurs; - améliorations éditoriales; - prise en charge de l'Identification Explicite d'Appareils ajoutée en ESM.

Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 6-12. del: Specifikacija protokola na aplikacijski ravni - Elementi tipa 12 (IEC 61158-6-12:2014)

Aplikacijski nivo procesnih vodil (FAL) omogoča uporabniškim programom dostop do komunikacijskega okolja procesnih vodil. In this respect, the FAL can be viewed as a “window between corresponding application programs.”
Ta standard določa skupne elemente za osnovne časovno kritične in časovno nekritične sporočilne komunikacije med aplikacijami v avtomatizacijskem okolju in material, specifičen za procesna vodila tipa 12. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja.
Ta standard na abstrakten način določa na zunaj vidno vedenje, ki ga zagotavlja aplikacijski nivo procesnih vodil različnih tipov v smislu
a) abstraktne sintakse, ki določa podatkovne enote protokola aplikacijskega nivoja, ki se prenašajo med aplikacijskimi osebki, ki komunicirajo,
a) prenosne sintakse, ki določa podatkovne enote protokola aplikacijskega nivoja, ki se prenašajo med aplikacijskimi osebki, ki komunicirajo,
c) stroja stanja aplikacijskega konteksta, ki opredeljuje vedenje aplikacijskega opravila, vidnega med aplikacijskimi osebki, ki komunicirajo, in
d) strojev stanja aplikacijskega razmerja, ki opredeljujejo komunikacijsko vedenje med aplikacijskimi osebki, ki komunicirajo.
Namen tega standarda je opredeliti protokol, ki se zagotavlja za
a) določitev žične predstavitve primitivov opravil iz standarda IEC 61158-5-10 in
b) določitev zunanje vidnega vedenja, povezanega z njihovim prenosom.
Ta standard določa protokol aplikacijskega nivoja procesnih vodil IEC v skladu z osnovnim referenčnim modelom OSI (ISO/IEC 7498) in strukturo aplikacijskega nivoja OSI (ISO/IEC 9545).
Opravila in protokole aplikacijskega nivoja procesnih vodil zagotavljajo aplikacijski osebki (AE) aplikacijskega nivoja procesnih vodil znotraj aplikacijskih procesov. Aplikacijski osebek aplikacijskega nivoja procesnih vodil sestavljata sklop objektno usmerjenih aplikacijskih opravilnih elementov (ASE) in osebek za upravljanje nivojev (LME), ki upravlja aplikacijski osebek. Aplikacijski opravilni elementi zagotavljajo komunikacijska opravila, ki delujejo na sklopu povezanih razredov objektov aplikacijskega procesa (APO). Med aplikacijske opravilne elemente aplikacijskega nivoja procesnih vodil spada aplikacijski opravilni element za upravljanje, ki zagotavlja skupen sklop opravil za upravljanje primerkov razredov aplikacijskega nivoja procesnih vodil.
Čeprav ta opravila določajo način izdajanja in dostavljanja zahtev in odzivov z vidika aplikacij, ne zajemajo specifikacije v zvezi s tem, kako naj se nanje odzovejo aplikacije, ki te zahteve in odzive oddajajo. To pomeni, da vedenjski vidiki aplikacij niso opredeljeni; opredeljena je le definicija zahtev in odzivov, ki jih lahko pošiljajo/prejemajo. Tako se uporabnikom aplikacijskega nivoja procesnih vodil omogoči večja prilagodljivost pri standardizaciji takega vedenja objektov. Poleg teh opravil so v tem standardu opredeljena tudi nekatera podporna opravila, da se omogoči dostop do aplikacijskega nivoja procesnih vodil za nadzorovanje nekaterih vidikov njegovega delovanja.

General Information

Status
Withdrawn
Publication Date
23-Oct-2014
Withdrawal Date
22-Sep-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
25-Jul-2022
Completion Date
25-Jul-2022

Relations

Buy Standard

Standard
EN 61158-6-12:2015
English language
142 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2015
1DGRPHãþD
SIST EN 61158-6-12:2012
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 6-12. del:
Specifikacija protokola na aplikacijski ravni - Elementi tipa 12 (IEC 61158-6-
12:2014)
Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer
protocol specification - Type 12 elements (IEC 61158-6-12:2014)
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-12: Protokollspezifikation des
Application Layer (Anwendungsschicht) - Typ 12-Elemente (IEC 61158-6-12:2014)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-12:
Spécification du protocole de la couche application - Eléments de type 12 (CEI 61158-6-
12:2014)
Ta slovenski standard je istoveten z: EN 61158-6-12:2014
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61158-6-12

NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-6-12:2012
English Version
Industrial communication networks - Fieldbus specifications -
Part 6-12: Application layer protocol specification - Type 12
elements
(IEC 61158-6-12:2014)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 6-12:
bus de terrain - Partie 6-12: Spécification du protocole de la Protokollspezifikation des Application Layer
couche application - Eléments de type 12 (Anwendungsschicht) - Typ 12-Elemente
(CEI 61158-6-12:2014) (IEC 61158-6-12:2014)
This European Standard was approved by CENELEC on 2014-09-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61158-6-12:2014 E
Foreword
The text of document 65C/764/FDIS, future edition 3 of IEC 61158-6-12, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-6-12:2014.
The following dates are fixed:
(dop) 2015-06-23
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2017-09-23
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 61158-6-12:2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61158-6-12:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61131-3 NOTE Harmonized as EN 61131-3.
IEC 61158-1:2014 NOTE Harmonized as EN 61158-1:2014 (not modified).
IEC 61158-4-12 NOTE Harmonized as EN 61158-4-12.
IEC 61784-1 NOTE Harmonized as EN 61784-1.
IEC 61784-2 NOTE Harmonized as EN 61784-2.

- 3 - EN 61158-6-12:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 61158-3-12 -  Industrial communication networks - EN 61158-3-12 -
Fieldbus specifications -
Part 3-12: Data-link layer service
definition - Type 12 elements
IEC 61158-5-12 -  Industrial communication networks - EN 61158-5-12 -
Fieldbus specifications -
Part 5-12: Application layer service
definition - Type 12 elements
IEC 61158-6 series Industrial communication networks - EN 61158-6 series
Fieldbus specifications -
Part 6: Application layer protocol
specification
ISO/IEC 7498-1 -  Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 7498-3 -  Information technology - Open Systems - -
Interconnection - Basic Reference Model:
Naming and addressing
ISO/IEC 8802-3 -  Information technology - - -
Telecommunications and information
exchange between systems - Local and
metropolitan area networks - Specific
requirements -
Part 3: Carrier sense multiple access with
collision detection (CSMA/CD) access
method and physical layer specifications
ISO/IEC 9545 -  Information technology - Open Systems - -
Interconnection - Application layer
structure
ISO/IEC 9899 -  Information technology - Programming - -
languages - C
Publication Year Title EN/HD Year
ISO/IEC 10731 -  Information technology - Open Systems - -
Interconnection - Basic Reference
Model - Conventions for the definition of
OSI services
ISO/IEC/IEEE 60559 -  Information technology - Microprocessor - -
Systems - Floating-Point arithmetic
IEEE 802.1D -  IEEE Standard for local and metropolitan - -
area networks - Media Access Control
(MAC) Bridges
IEEE 802.1Q -  IEEE Standard for Local and metropolitan - -
area networks - Media Access Control
(MAC) Bridges and Virtual Bridges
IETF RFC 768 -  User Datagram Protocol - -
IETF RFC 791 -  Internet Protocol - DARPA Internet - -
Program Protocol Specification
IETF RFC 826 -  Ethernet Address Resolution Protocol: Or - -
Converting Network Protocol Addresses
to 48.bit Ethernet Address for
Transmission on Ethernet Hardware

IEC 61158-6-12 ®
Edition 3.0 2014-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial communication networks – Fieldbus specifications –

Part 6-12: Application layer protocol specification – Type 12 elements

Réseaux de communication industriels – Spécifications des bus de terrain –

Partie 6-12: Spécification du protocole de la couche application – Éléments

de type 12
-
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XG
ICS 25.040.40; 35.100.70; 35.110 ISBN 978-2-8322-1762-7

– 2 – IEC 61158-6-12:2014 © IEC 2014
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 10
1.1 General . 10
1.2 Specifications . 11
1.3 Conformance . 11
2 Normative references . 11
3 Terms, definitions, symbols, abbreviations and conventions . 12
3.1 Reference model terms and definitions . 12
3.2 Service convention terms and definitions . 13
3.3 Application layer definitions . 14
3.4 Common symbols and abbreviations . 19
3.5 Additional symbols and abbreviations . 19
3.6 Conventions . 21
4 Application layer protocol specification . 25
4.1 Operating principle . 25
4.2 Node reference model . 26
5 FAL syntax description . 27
5.1 Coding principles . 27
5.2 Data types and encoding rules . 27
5.3 AR coding . 31
5.4 SII coding . 36
5.5 Isochronous PDI coding . 40
5.6 CoE coding . 43
5.7 EoE coding . 81
5.8 FoE Coding . 89
6 FAL protocol state machines . 95
6.1 Overall structure . 95
6.2 AP-Context state machine . 97
6.3 FAL service protocol machine (FSPM) . 97
6.4 Application Relationship Protocol Machines (ARPMs) . 97
6.5 DLL mapping protocol machine (DMPM) . 137
Bibliography . 138

Figure 1 – Common structure of specific fields . 21
Figure 2 – Type description example . 23
Figure 3 – Slave Node Reference Model . 26
Figure 4 – Encoding of Time of Day value . 28
Figure 5 – Encoding of Time Difference value . 28
Figure 6 – AL Control Request structure . 31
Figure 7 – AL Control Response structure. 31
Figure 8 – AL State Changed structure . 34
Figure 9 – PDI Control type description . 34

IEC 61158-6-12:2014 © IEC 2014 – 3 –
Figure 10 – Sync Configuration type description . 35
Figure 11 – Distributed Clock sync and latch type description .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.