EN 60603-7-7:2006

Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz

Covers 8 way connectors, up to 4 pairs, and specifies mechanical and environmental requirements, and electrical transmission requirements for frequencies up to 600 MHz. These connectors are typically used as category 7 connectors in class F cabling systems specified in IS0/IEC 11801. They are intermateable, interoperable and backward compatible with IEC 60603-7-X series connectors.

Steckverbinder für elektronische Einrichtungen - Teil 7-7: Bauartspezifikation für geschirmte freie und feste Steckverbinder, 8-polig, für Datenübertragungen bis 600 MHz

Connecteurs pour équipements électroniques - Partie 7-7: Spécification particulière pour les fiches et les embases blindées à 8 voies pour la transmission des données à des fréquences jusqu'à 600 MHz

Konektorji za elektronsko opremo - 7-7. del: Podrobna specifikacija za 8-polne, zaslonjene, proste in nespremenljive konektorje za prenos podatkov s frekvencami do 600 MHz (IEC 60603-7-7:2006)

General Information

• Status: Withdrawn
• Publication Date: 25-Jul-2006
• Withdrawal Date: 30-Jun-2009
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Sep-2013
• Completion Date: 01-Sep-2013
• Ref Project: SIST EN 60603-7-7:2007 - Connectors for electronic equipment -- Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz

Relations

• Replaces: EN 60603-7-7:2002 - Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 600 MHz (category 7, shielded)
• Effective Date: 28-Jan-2023
• Replaced By: EN 60603-7-7:2010 - Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz
• Effective Date: 28-Jan-2023

Standards Content (Sample)

6/29(16., 6,67(1

67$1'$5'
MDQXDU
.RQHNWRUML]DHOHNWURQVNRRSUHPRGHO3RGUREQDVSHFLILNDFLMD]D
SROQH]DVORQMHQHSURVWHLQQHVSUHPHQOMLYHNRQHNWRUMH]DSUHQRVSRGDWNRYV
IUHNYHQFDPLGR0+],(&
LVWRYHWHQ(1
&RQQHFWRUVIRUHOHFWURQLFHTXLSPHQW3DUW'HWDLOVSHFLILFDWLRQIRUZD\
VKLHOGHGIUHHDQGIL[HGFRQQHFWRUVIRUGDWDWUDQVPLVVLRQZLWKIUHTXHQFLHVXSWR
0+],(&
,&6 5HIHUHQþQDãWHYLOND

6,67(1HQ
!"#$%&’( )&!*+,%- .

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60603-7-7

NORME EUROPÉENNE
July 2006
EUROPÄISCHE NORM

ICS 31.220.10 Supersedes EN 60603-7-7:2002


English version


Connectors for electronic equipment
Part 7-7: Detail specification for 8-way, shielded,
free and fixed connectors for data transmission
with frequencies up to 600 MHz
(IEC 60603-7-7:2006)


Connecteurs pour équipements Steckverbinder für elektronische
électroniques Einrichtungen
Partie 7-7: Spécification particulière Teil 7-7: Bauartspezifikation
pour les fiches et les embases blindées für geschirmte freie und feste
à 8 voies pour la transmission Steckverbinder, 8-polig, für
des données à des fréquences Datenübertragungen bis 600 MHz
jusqu'à 600 MHz (IEC 60603-7-7:2006)
(CEI 60603-7-7:2006)




This European Standard was approved by CENELEC on 2006-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60603-7-7:2006 E

---------------------- Page: 2 ----------------------

EN 60603-7-7:2006 - 2 -
Foreword
The text of document 48B/1664/FDIS, future edition 2 of IEC 60603-7-7, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60603-7-7 on 2006-07-01.
This European Standard supersedes EN 60603-7-7: 2002.
The following changes have been made:
– Many minor detail changes concerning the harmonization of this document, its specifications and its
test procedures with those contained in the other IEC/EN 60603-7 series standards.
– Significant performance improvements have been made to insertion loss and return loss, now
specified to 1 000 MHz, for special applications (ISO/IEC 15018).
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2007-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2009-07-01
with the EN have to be withdrawn
The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is
claimed that compliance with this document may involve the use of a patent concerning the switch given
in 2.2.2.
The IEC and CENELEC take no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under
reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this
respect, the statement of the holder of this patent right is registered with the IEC. Information may be
obtained from:
Nexans
16, rue de Monceau
75008 Paris
France
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights other than those identified above. IEC and CENELEC shall not be held responsible for
identifying any or all such patent rights.
Annex ZA has been
...