prEN IEC 60269-7:2021

Low-voltage fuses - Part 7: Fuse links for the protection of batteries

These supplementary requirements apply to fuse-links for the protection of batteries and battery systems, including, but not limited to terminology, for electricity storage in equipment for circuits of nominal voltages up to 1 500 V d.c. Their rated voltage may be higher than 1 500 V d.c. The object of these supplementary requirements is to establish the characteristics of Battery fuse-links in such a way that they can be replaced by other fuse-links having the same characteristics, provided that their dimensions are identical.

Fusibles basse tension - Partie 7: Exigences supplémentaires concernant les éléments de remplacement utilisés pour la protection des batteries et des systèmes de batterie

IEC 60269-7:2021 Ces exigences supplémentaires s'appliquent aux éléments de remplacement utilisés pour la protection des batteries et des systèmes de batterie, y compris, entre autres, la terminologie, pour le stockage de l'électricité dans les équipements pour les circuits de tension nominale allant jusqu'à 1 500 V en courant continu.

Nizkonapetostne varovalke - 7. del: Taljivi vložki za zaščito baterij

General Information

• Status: Not Published
• Publication Date: 11-Apr-2024
• ICS: 29.120.50 - Fuses and other overcurrent protection devices
• Technical Committee: CLC/SR 32B - Low-voltage fuses
• Drafting Committee: IEC/SC 32B - IEC_SC_32B
• Current Stage: 6055 - Ratification Completed (DOR) - Publishing
• Start Date: 18-Jan-2024
• Completion Date: 18-Jan-2024
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: oSIST prEN IEC 60269-7:2021 - Low-voltage fuses - Part 7: Fuse links for the protection of batteries

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 60269-7:2021
01-september-2021
Nizkonapetostne varovalke - 7. del: Taljivi vložki za zaščito baterij
Low-voltage fuses - Part 7: Fuse links for the protection of batteries
Fusibles basse tension - Partie 7: Exigences supplémentaires concernant les éléments
de remplacement utilisés pour la protection des batteries et des systèmes de batterie
Ta slovenski standard je istoveten z: prEN IEC 60269-7:2021
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
oSIST prEN IEC 60269-7:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60269-7:2021

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60269-7:2021
32B/700/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60269-7 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2021-06-11 2021-09-03
SUPERSEDES DOCUMENTS:
32B/695/CD, 32B/696A/CC

IEC SC 32B : LOW-VOLTAGE FUSES
SECRETARIAT: SECRETARY:
Germany Mr Michael Altenhuber
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

TC 21,SC 32A,TC 64,TC 120
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.

TITLE:
Low-voltage fuses - Part 7: Fuse links for the protection of batteries

PROPOSED STABILITY DATE: 2024

NOTE FROM TC/SC OFFICERS:


Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60269-7:2021
IEC CDV 60269-7/Ed1 © IEC:2021        -2-  32B/700/CDV

1 LOW VOLTAGE FUSES
2 Part 7: Supplementary Requirements for fuse-links for the protection of batteries and battery systems
3
4 FOREWORD
5
6   1)  The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
7     all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
8     international co-operation on all questions concerning standardization in the electrical and electronic fields. To
9     this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
10    Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
11    Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
12    in the subject dealt with may participate in this preparatory work. International, governmental and non17
13    governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
14    with the International Organization for Standardization (ISO) in accordance with conditions determined by
15    agreement between the two organizations.
16      2)  The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
17            consensus of opinion on the relevant subjects since each technical committee has representation from all
18            interested IEC National Committees.
19      3)  IEC Publications have the form of recommendations for international use and are accepted by IEC National
20   Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
21   Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
22   misinterpretation by any end user.
23     4)  In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
24    transparently to the maximum extent possible in their national and regional publications. Any di
...