EN 62329-2:2006

Heat shrinkable moulded shapes - Part 2: Methods of test

This part of IEC 62329 gives methods of test for heat-shrinkable moulded shapes in a range of configurations and materials suitable for insulation, environmental sealing, mechanical protection and strain relief for connector/cable terminations and multi-way transitions. The tests specified are designed to control the quality of the moulded shapes but it is recognized that they do not completely establish the suitability of moulded shapes for impregnation or encapsulation processes or other specialized applications.

Wärmeschrumpfende Formteile - Teil 2: Prüfverfahren

Gaines thermorétractables - Partie 2: Méthodes d'essai

La CEI 62329-2:2006 décrit des méthodes d'essai des profilés thermorétractables dans une gamme de configurations et de matériaux adaptés à l'isolement, aux éléments d'étanchéité contre les intempéries, à la protection mécanique et aux dispositifs anti-traction pour connecteurs/extrémités de câbles, et aux transitions à conducteurs multiples. Les essais spécifiés sont prévus pour contrôler la qualité des profilés, mais il est admis qu'ils n'établissent pas totalement l'adéquation des profilés aux processus d'imprégnation ou d'encapsulation ou à d'autres applications spécialisées.

Toplotno skrčljive vlite oblike – 2. del: Preskušalne metode (IEC 62329-2:2006)

General Information

• Status: Published
• Publication Date: 24-Oct-2006
• Withdrawal Date: 30-Sep-2009
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/TC 15 - IEC_TC_15
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 25-Oct-2006
• Completion Date: 25-Oct-2006
• Ref Project: SIST EN 62329-2:2007 - Heat shrinkable moulded shapes -- Part 2: Methods of test

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62329-2:2007
01-november-2007
7RSORWQRVNUþOMLYHYOLWHREOLNH±GHO3UHVNXãDOQHPHWRGH,(&
Heat shrinkable moulded shapes -- Part 2: Methods of test (IEC 62329-2:2006)
Wärmeschrumpfende Formteile -- Teil 2: Prüfverfahren (IEC 62329-2:2006)
Gaines thermorétractables -- Partie 2: Méthodes d'essai (IEC 62329-2:2006)
Ta slovenski standard je istoveten z: EN 62329-2:2006
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST EN 62329-2:2007 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 62329-2

NORME EUROPÉENNE
October 2006
EUROPÄISCHE NORM

ICS 29.035.20


English version


Heat shrinkable moulded shapes
Part 2: Methods of test
(IEC 62329-2:2006)


Gaines thermorétractables  Wärmeschrumpfende Formteile
Partie 2: Méthodes d'essai Teil 2: Prüfverfahren
(CEI 62329-2:2006) (IEC 62329-2:2006)




This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62329-2:2006 E

---------------------- Page: 2 ----------------------

EN 62329-2:2006 - 2 -
Foreword
The text of document 15/316/FDIS, future edition 1 of IEC 62329-2, prepared by IEC TC 15, Standards
on specifications for electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 62329-2 on 2006-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62329-2:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 62329-2:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60093 1980 Methods of test for volume resistivity and HD 429 S1 1983
surface resistivity of solid electrical insulating
materials


IEC 60212 1971 Standard conditions for use prior to and HD 437 S1 1984
during the testing of solid electrical insulating
materials


IEC 60216-4-1 2006 Electrical insulating materials - Thermal EN 60216-4-1 2006
endurance properties
Part 4-1: Ageing ovens - Single-chamber
ovens


IEC 60216-4-2 2000 Electrical insulating materials - Thermal EN 60216-4-2 2000
endurance properties
Part 4-2: Ageing ovens - Precision ovens for
use up to 300 °C


IEC 60243-1 1998 Electrical strength of insulating materials - EN 60243-1 1998
Test methods
Part 1: Tests at power frequencies


IEC 60250 1969 Recommended methods for the determination - -
of the permittivity and dielectric dissipation
factor of electrical insulating materials at
power, audio and radio frequenci
...