EN 60384-13:2006

Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors

is applicable to fixed direct current capacitors, using as dielectric a polypropylene film with electrodes of thin metal foils. The capacitors covered by this standard are intended for use in electronic equipment.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 13: Rahmenspezifikation - Festkondensatoren mit einem Dielektrikum aus Polypropylen und Belägen aus Metallfolien für Gleichspannung

Condensateurs fixes utilisés dans les équipements électroniques - Partie 13: Spécification intermédiaire - Condensateurs fixes pour courant continu à diélectrique en film de polypropylène à armatures en feuilles métalliques

Nespremenljivi kondenzatorji za elektronsko opremo – 13. del: Sektorska specifikacija – Nespremenljivi kondenzatorji za enosmerni tok s kovinsko folijo in polipropilenskim dielektrikom (IEC 60384-13:2006)

General Information

• Status: Withdrawn
• Publication Date: 08-Mar-2006
• Withdrawal Date: 31-Jan-2009
• ICS: 31.060.30 - Paper and plastics capacitors
• Technical Committee: CLC/TC 40XA - CLC/TC 40XA
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Parallel Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 13-Jan-2015
• Completion Date: 13-Jan-2015
• Ref Project: SIST EN 60384-13:2006 - Fixed capacitors for use in electronic equipment -- Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors

Relations

• Replaces: EN 131800:1997 - Sectional Specification: Fixed polypropylene film dielectric metal foil d.c. capacitors
• Effective Date: 29-Jan-2023
• Replaced By: EN 60384-13:2012 - Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60384-13:2006

STANDARD
julij 2006
Nespremenljivi kondenzatorji za elektronsko opremo – 13. del: Sektorska
specifikacija – Nespremenljivi kondenzatorji za enosmerni tok s kovinsko
folijo in polipropilenskim dielektrikom (IEC 60384-13:2006)
Fixed capacitors for use in electronic equipment – Part 13: Sectional specification –
Fixed polypropylene film dielectric metal foil d.c. capacitors (IEC 60384-13:2006)
ICS 31.060.10 Referenčna številka
SIST EN 60384-13:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60384-3

NORME EUROPÉENNE
December 2006
EUROPÄISCHE NORM

ICS 31.060.40


English version


Fixed capacitors for use in electronic equipment
Part 3: Sectional specification: Surface mount fixed tantalum
electrolytic capacitors with manganese dioxide solid electrolyte
(IEC 60384-3:2006)


Condensateurs fixes utilisés dans  Festkondensatoren zur Verwendung
les équipements électroniques in Geräten der Elektronik
Partie 3: Spécification intermédiaire: Teil 3: Rahmenspezifikation:
Condensateurs fixes électrolytiques Oberflächenmontierbare
au tantale pour montage en surface Tantal-Kondensatoren mit festem
à électrolyte solide en bioxyde Mangandioxid-Elektrolyt
de manganèse (IEC 60384-3:2006)
(CEI 60384-3:2006)




This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-3:2006 E

---------------------- Page: 2 ----------------------

EN 60384-3:2006 - 2 -
Foreword
The text of document 40/1771/FDIS, future edition 3 of IEC 60384-3, prepared by IEC TC 40, Capacitors
and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60384-3 on 2006-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-3:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60384-3:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 60062 (mod) - Marking codes for resistors and capacitors EN 60062 2005


1)
IEC 60063 - Preferred number series for resistors and - -
capacitors


1) 2)
IEC 60068-1 - Environmental testing EN 60068-1 1994
Part 1: General and guidance


1) 2)
IEC 60384-1 (mod) - Fixed capacitors for use in electronic EN 60384-1 2001
equipment + corr. October 2001
Part 1: Generic specification


1)
IEC 60410 - Sampling plans and procedures for inspection - -
by attributes


1)
ISO 3 - Preferred numbers - Series of pre
...