EN 60745-2-4:2003

Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type

Applies to sanders with the exception of all types of disc-type sanders, which are covered by IEC 60745-2-3. Tools covered include but are not limited to belt sanders, reciprocating sanders or polishers, orbital sanders or polishers, and random orbit sanders or polishers.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-4: Besondere Anforderungen für Schleifer und Polierer außer Tellerschleifern

Outils électroportatifs à moteur - Sécurité - Partie 2-4: Règles particulières pour les ponceuses et les lustreuses autres que du type à disque

S'applique aux ponceuses à l'exception de toutes les ponceuses du type à disque qui sont couvertes par la CEI 60745-2-3. Les outils concernés comprennent mais n'y sont pas limités, les ponceuses à bande, les ponceuses ou polisseuses vibrantes, les ponceuses ou polisseuses orbitales ainsi que les ponceuses orbitales spéciales.

Ročna električna orodja - Varnost - 2-4. del: Posebne zahteve za peskalnike in brusilnike, ki niso kolutni (IEC 60745-2-4:2002; spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 23-Jul-2003
• Withdrawal Date: 31-Jan-2006
• ICS: 25.080.50 - Grinding and polishing machines
• ICS: 25.140.20 - Electric tools
• ICS: 25.140.30 - Hand-operated tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: IEC/TC 116 - Safety of hand-held motor-operated electric tools
• Parallel Committee: IEC/SC 61F - IEC_SC_61F --> TC 116
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-May-2012
• Completion Date: 01-May-2012
• Directive: 98/37/EC - Machinery
• Ref Project: SIST EN 60745-2-4:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-4: Particular requirements for sanders and polishers other than disk type

Relations

• Replaces: EN 50144-2-4:1999 - Safety of hand-held electric motor operated tools - Part 2-4: Particular requirements for sanders
• Effective Date: 28-Jan-2023
• Replaces: EN 50260-2-4:2002 - Safety of hand-held battery-powered motor-operated tools and battery packs - Part 2-4: Particular requirements for sanders
• Effective Date: 28-Jan-2023
• Replaced By: EN 60745-2-4:2009 - Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
• Effective Date: 13-May-2010
• Amended By: EN 60745-2-4:2003/A1:2009 - Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
• Effective Date: 29-Jan-2023
• Amended By: EN 60745-2-4:2003/A11:2007 - Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
• Effective Date: 07-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-4: Besondere Anforderungen für Schleifer und Polierer außer TellerschleifernOutils électroportatifs à moteur - Sécurité -- Partie 2-4: Règles particulières pour les ponceuses et lustreuses, autres que du type à disqueHand-held motor-operated electric tools - Safety -- Part 2-4: Particular requirements for sanders and polishers other than disk type25.140.20Electric tools25.080.50Brusilni in polirni strojiGrinding and polishing machinesICS:Ta slovenski standard je istoveten z:EN 60745-2-4:2003SIST EN 60745-2-4:2003en01-december-2003SIST EN 60745-2-4:2003SLOVENSKI
STANDARDSIST EN 50260-2-4:2002SIST EN 50144-2-4:20001DGRPHãþD







EUROPEAN STANDARD
EN 60745-2-4 NORME EUROPÉENNE EUROPÄISCHE NORM
July 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-4:2003 E
ICS 25.140.20; 25.140.30; 25.080.50 Supersedes EN 50144-2-4:1999 & EN 50260-2-4:2002
English version
Hand-held motor-operated electric tools -
Safety Part 2-4: Particular requirements for sanders
and polishers other than disk type (IEC 60745-2-4:2002, modified)
Outils électroportatifs à moteur -
Sécurité Partie 2-4: Règles particulières pour les ponceuses et lustreuses,
autres que du type à disque (CEI 60745-2-4:2002, modifiée)
Handgeführte motorbetriebene Elektrowerkzeuge -
Sicherheit Teil 2-4: Besondere Anforderungen
für Schleifer und Polierer außer Tellerschleifern (IEC 60745-2-4:2002, modifiziert)
This European Standard was approved by CENELEC on 2003-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.



EN 60745-2-4:2003 – 2 –
Foreword The text of the International Standard IEC 60745-2-4:2002 , prepared by SC 61F, Safety of hand-held motor-operated electric tools, of IEC TC 61, Safety of household and similar electrical appliances, together with the common modifications prepared by the Technical Committee CENELEC TC 61F, Safety of hand-held and transportable motor-operated electric tools, was submitted to the formal vote and was approved by CENELEC as EN 60745-2-4 on 2003-02-01. This European Standard supersedes EN 50144-2-4:1999 and EN 50260-2-4:2002.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-02-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-02-01 Other standards referred to in this European standard are listed in Clause 2. Clause 2 lists the valid edition of those documents at the time of issue of this EN. This standard is divided into two parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This European Standard has been prepared under a mandate given to CEN and CENELEC by the European Commission and the European Free Trade Association and supports the essential health and safety requirements of the Machinery Directive. Compliance with the clauses of Part 1 together with this Part 2 provides one means of conforming with the essential health and safety requirements of the Directive concerned. CEN/TC 255 is producing standards for non-electric sanders and polishers (EN 792-8). Warning:
Other requirements and other EC Directives can be applicable to the products falling within the scope of this standard. This standard follows the over
...