prEN IEC 63366:2023
(Main)Product category rules for life cycle assessment of electrical and electronic products and systems.
Product category rules for life cycle assessment of electrical and electronic products and systems.
Règles de définition des catégories de produits pour l'analyse du cycle de vie des produits et systèmes électriques et électroniques
Pravila za kategorije proizvodov za ocenjevanje življenjskega cikla električnih in elektronskih proizvodov ter sistemov
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2023
Pravila za kategorije proizvodov za ocenjevanje življenjskega cikla električnih in
elektronskih proizvodov ter sistemov
Product category rules for life cycle assessment of electrical and electronic products and
systems
Règles de définition des catégories de produits pour l'analyse du cycle de vie des
produits et systèmes électriques et électroniques
Ta slovenski standard je istoveten z: prEN IEC 63366:2023
ICS:
13.020.60 Življenjski ciklusi izdelkov Product life-cycles
29.020 Elektrotehnika na splošno Electrical engineering in
general
31.020 Elektronske komponente na Electronic components in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
111/691/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63366 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-03-10 2023-06-02
SUPERSEDES DOCUMENTS:
111/646/CD, 111/690/CC
IEC TC 111 : ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS
SECRETARIAT: SECRETARY:
Italy Mr Alfonso Sturchio
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 121
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are reminded
that the enquiry stage is the final stage for submitting "in some countries" clauses. See AC/22/2007.
TITLE:
Product category rules for life cycle assessment of electrical and electronic products and
systems.
PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
IEC CDV 63366 IEC:2023 – 2 –
1 CONTENTS
2 FOREWORD . 4
3 INTRODUCTION . 6
4 1 Scope . 6
5 2 Normative references . 6
6 3 Terms and definitions . 7
7 4 Product life cycle assessment . 13
8 4.1 General . 13
9 4.2 Product Category Rules . 13
10 4.3 Development of scenarios . 23
11 4.4 Life cycle impact assessment . 25
12 4.5 Additional rules . 25
13 4.6 LCA report . 26
14 5 Requirements for the development of PSR for EEPS . 28
15 Annex A (informative) Recovery activities: Allocation, calculation and default values . 30
16 A.1 Circular formula . 30
17 A.2 Formula with benefits . 30
18 A.3 Default values for R1, R2 and R3 . 33
19 Annex B (informative) Access to LCA datasets . 34
20 B.1 General . 34
21 B.2 The Global LCA Data Access network . 34
22 Annex C (informative) Recommended impact categories . 35
23 C.1 General . 35
24 C.2 Additional environmental information . 41
25 Annex D (informative) Correlation with EN15804 standard . 42
26 Annex E (informative) General content of a product’s environmental declaration . 44
27 E.1 General . 44
28 E.2 List of information in environmental declarations . 44
29 E.2.1 Information about the manufacturer . 44
30 E.2.2 Description of the product family, the reference product and its
31 packaging . 44
32 E.2.3 Constitutive materials and substances . 44
33 E.2.4 Information on life cycle stages and potential impacts. 44
34 Annex F (informative) Example of a product’s environmental declaration . 46
35 F.1 General . 46
36 F.2 Basic example . 46
37 Bibliography . 50
39 Figure 1 – Graphical visualization of functional unit, technical solution and reference
40 flow relationship . 16
41 Figure 2 – Typical scheme of the analysed product system’s boundaries, including the
42 life cycle stages and unit processes, which separate it from the ecosphere (natural
43 environment) . 18
44 Figure 3 –End-of-waste decision tree . 22
45 Figure D.1 –Life cycle stages and corresponding modules as defined in EN 15804 . 42
46 Figure F.1 – material composition . 47
IEC CDV 63366 IEC:2023 – 3 –
48 Table 1 – Key parameters of EoL related processes to be defined for the EoL scenario . 25
49 Table A.1 –Adaption of the Circular Formula and parameters for the application in
50 context of “net benefits” . 31
51 Table A.2 –Default values for R1, R2 and R3 to be apply in case of the lack of specific
52 data . 33
53 Table C.1 – Overview of recommended impact categories at midpoint and indicators to
54 be considered in LCA studies or reported in environmental declarations . 36
55 Table C.2 –Characterization factors recommended in LIME (Life Cycle Impact
56 Assessment Method based on Endpoint, in Japan) and their characteristics . 40
57 Table C.3 –Additional parameters to be declared in the environmental declaration per
58 functional/declared unit . 41
59 Table D.1 – Life cycle information - Relation between life cycle stages in this standard
60 and EN15804 modules . 43
IEC CDV 63366 IEC:2023 – 4 –
62 INTERNATIONAL ELECTROTECHNICAL COMMISSION
63 ____________
65 PRODUCT CATEGORY RULES FOR LIFE CYCLE ASSESSMENT OF
66 ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS
68 FOREWORD
69 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
70 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
71 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
72 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
73 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
74 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
75 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
76 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
77 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
78 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
79 consensus of opinion on the relevant subjects since each technical committee has representation from all
80 interested IEC National Committees.
81 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
82 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
83 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
84 misinterpretation by any end user.
85 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
86 transparently to the maximum extent possible in their national and regional publications. Any divergence between
87 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
88 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
89 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
90 services carried out by independent certification bodies.
91 6) All users should ensure that they have the latest edition of this publication.
92 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
93 members of its technical committees and IEC National Committees for any personal injury, property damage or
94 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
95 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
96 Publications.
97 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
98 indispensable for the correct application of this publication.
99 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
100 rights. IEC shall not be held responsible for identifying any or all such patent rights.
101 IEC 63366 has been prepared by IEC technical committee 111: ENVIRONMENTAL
102 STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS. It
103 is an International Standard.
104 The text of this International Standard is based on the following documents:
Draft Report on voting
111/XX/FDIS 111/XX/RVD
106 Full information on the voting for its approval can be found in the report on voting indicated in
107 the above table.
108 The language used for the development of this International Standard is English.
109 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
110 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
111 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
112 described in greater detail at www.iec.ch/publications.
IEC CDV 63366 IEC:2023 – 5 –
113 The committee has decided that the contents of this document will remain unchanged until the
114 stability date indicated on the IEC website under webstore.iec.ch in the data related to the
115 specific document. At this date, the document will be
116 • reconfirmed,
117 • withdrawn,
118 • replaced by a revised edition, or
119 • amended.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.