EN IEC 60674-3-7:2023
(Main)Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Fluoroethylene-propylene (FEP) films used for electrical insulation
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Fluoroethylene-propylene (FEP) films used for electrical insulation
IEC 60674-3-7:2023 gives the requirements for fluoroethylene-propylene (FEP) films used for electrical insulation. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application can be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. Safety warning: It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner. This second edition cancels and replaces the first edition published in 1992. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the title of the standard has been changed to unify the name within the IEC 60674 series; b) update of the normative references.
Isolierfolien für elektrotechnische Zwecke - Teil 3: Bestimmungen für einzelne Materialien - Blatt 7: Fluorethylen-Propylen-(FEP)-Folien zur elektrischen Isolierung
Films plastiques à usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 7: Films de fluoroéthylène-propylène (FEP) utilisés dans l'isolation électrique
IEC 60674-3-7: 2023 spécifie les exigences pour les films de fluoroéthylènepropylène (FEP) utilisés dans l'isolation électrique. Les matériaux conformes à la présente spécification satisfont à des niveaux établis de performance. Toutefois, l'utilisateur peut choisir le matériau destiné à une application spécifique en se fondant sur les exigences réelles nécessaires pour assurer des performances adéquates dans le cadre de l'application considérée et non sur la présente spécification seule. Avertissement de sécurité: il incombe à l'utilisateur des méthodes contenues ou référencées dans le présent document de s'assurer que celles-ci sont utilisées en toute sécurité. Cette deuxième édition annule et remplace la première édition parue en 1992. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) le titre de la norme a été modifié pour harmoniser l'intitulé de la série IEC 60674; b) les références normatives ont été mises à jour.
Plastične folije za električne namene - 3. del: Specifikacije za posamezne materiale - 7. list: Fluoretilen-propilenske (FEP) folije, ki se uporabljajo za električno izolacijo (IEC 60674-3-7:2023)
Ta list standarda IEC 60674-3 določa zahteve za fluoretilen-propilenske (FEP) folije, ki se uporabljajo za električno izolacijo.
Materiali, ki so skladni s to specifikacijo, ustrezajo določenim ravnem delovanja. Vendar uporabnik lahko material za določeno uporabo izbere glede na dejanske zahteve, ki omogočajo ustrezno delovanje pri tej uporabi, in ne samo na podlagi te specifikacije.
Varnostno opozorilo: Končni uporabnik je odgovoren za varno uporabo metod, ki so zajete ali omenjene v tem dokumentu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2023
Plastične folije za električne namene - 3. del: Specifikacije za posamezne materiale
- 7. list: Fluoretilen-propilenske (FEP) folije, ki se uporabljajo za električno izolacijo
(IEC 60674-3-7:2023)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet
7: Fluoroethylene-propylene (FEP) films used for electrical insulation (IEC 60674-3-
7:2023)
Isolierfolien für elektrotechnische Zwecke - Teil 3: Bestimmungen für einzelne
Materialien - Blatt 7: Fluorethylen-Propylen-(FEP)-Folien zur elektrischen Isolierung (IEC
60674-3-7:2023)
Films plastiques à usages électriques - Partie 3: Spécifications pour matériaux
particuliers - Feuille 7: Films de fluoroéthylène-propylène (FEP) utilisés dans l'isolation
électrique (IEC 60674-3-7:2023)
Ta slovenski standard je istoveten z: EN IEC 60674-3-7:2023
ICS:
29.035.20 Plastični in gumeni izolacijski Plastics and rubber insulating
materiali materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60674-3-7
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2023
ICS 29.035.20 Supersedes EN 60674-3-7:1998
English Version
Plastic films for electrical purposes - Part 3: Specifications for
individual materials - Sheet 7: Fluoroethylene-propylene (FEP)
films used for electrical insulation
(IEC 60674-3-7:2023)
Films plastiques à usages électriques - Partie 3: Isolierfolien für elektrotechnische Zwecke - Teil 3:
Spécifications pour matériaux particuliers - Feuille 7: Films Bestimmungen für einzelne Materialien - Blatt 7:
de fluoroéthylène-propylène (FEP) utilisés dans l'isolation Fluorethylen-Propylen-(FEP)-Folien zur elektrischen
électrique Isolierung
(IEC 60674-3-7:2023) (IEC 60674-3-7:2023)
This European Standard was approved by CENELEC on 2023-09-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60674-3-7:2023 E
European foreword
The text of document 15/980/CDV, future edition 2 of IEC 60674-3-7, prepared by IEC/TC 15 "Solid
electrical insulating materials" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60674-3-7:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-06-22
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-09-22
document have to be withdrawn
This document supersedes EN 60674-3-7:1998 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60674-3-7:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60674-3 (series) NOTE Approved as EN 60674-3 (series)
ISO 1183-2:2019 NOTE Approved as EN ISO 1183-2:2019 (not modified)
ISO 11357-3:2018 NOTE Approved as EN ISO 11357-3:2018 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60674-1 1980 Specification for plastic films for electrical EN 60674-1 1998
purposes. Part 1: Definitions and general
requirements
IEC 60674-2 2016 Specification for plastic films for electrical EN 60674-2 2017
purposes - Part 2: Methods of test
IEC 60757 - Code for designation of colours EN IEC 60757 -
IEC 60674-3-7 ®
Edition 2.0 2023-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Plastic films for electrical purposes –
Part 3: Specifications for individual materials – Sheet 7: Fluoroethylene-
propylene (FEP) films used for electrical insulation
Films plastiques à usages électriques –
Partie 3: Spécifications pour matériaux particuliers – Feuille 7: Films de
fluoroéthylène-propylène (FEP) utilisés dans l'isolation électrique
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.035.20 ISBN 978-2-8322-7402-6
– 2 – IEC 60674-3-7:2023 © IEC 2023
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Classification . 6
5 Designation . 7
6 General requirement . 7
7 Dimensions. 7
7.1 Thickness . 7
7.2 Width . 8
8 Film length/roll diameter . 8
9 Properties . 8
9.1 Properties not dependent on thickness . 8
9.2 Properties dependent on thickness . 9
9.3 Electric strength (AC test) . 9
9.4 Thermal endurance . 10
9.5 Burning characteristics. 10
10 Roll characteristics for all types . 10
10.1 General . 10
10.2 Windability/sag . 10
10.3 Joins . 10
10.4 Difference between the film width and the roll width . 11
10.5 Cores . 11
Bibliography . 12
Table 1 – Nominal thickness and permitted range of thickness . 8
Table 2 – Property not dependent on thickness for all types. 9
Table 3 – Properties dependent on thickness for all types . 9
Table 4 – Electric strength (AC test) for all types . 10
Table 5 – Maximum permissible number of joins per roll . 11
Table 6 – Difference between the film width and the roll width . 11
IEC 60674-3-7:2023 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PLASTIC FILMS FOR ELECTRICAL PURPOSES –
Part 3: Specifications for individual materials –
Sheet 7: Fluoroethylene-propylene (FEP) films
used for electrical insulation
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct applica
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.