EN 62309:2004
(Main)Dependability of products containing reused parts - Requirements for functionality and tests
Dependability of products containing reused parts - Requirements for functionality and tests
Introduces the concept to check the reliability and functionality of reused parts and their usage within new products. Also provides information and criteria about the tests/analysis required for products containing such reused parts, which are declared qualified-as-good-as-new relative to the designed life of the product. The purpose of this standard is to ensure by tests and analysis that the reliability and functionality of a new product containing reused parts is comparable to a product with only new parts.
Zuverlässigkeit von Produkten mit wieder verwendeten Teilen - Anforderungen an Funktionalität und Prüfungen
Sûreté de fonctionnement des produits contenant des composants réutilisés - Exigences pour la fonctionalité et les essais
Introduit le concept de la vérification de la fiabilité et de la fonctionnalité des composants réutilisés et de leur utilisation dans des produits. Fournit aussi des informations et des critères pour les tests/analyses prescrits pour les produits contenant de tels composants réutilisés et qui sont déclarés qualifiés bons comme neufs relativement à la durée de vie conçue du produit. L'objet de la présente norme est d'assurer par des tests et des analyses que la fiabilité et la fonctionnalité des nouveaux produits contenant des composants réutilisés est comparable à celle d'un produit ne contenant que des composants neufs.
Zagotovljivost izdelkov, ki vsebujejo rabljene dele - Zahteve za funkcionalnost in preskušanje (IEC 62309:2004)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2007
Zagotovljivost izdelkov, ki vsebujejo rabljene dele - Zahteve za funkcionalnost in
preskušanje (IEC 62309:2004)
Dependability of products containing reused parts - Requirements for functionality and
tests
Zuverlässigkeit von Produkten mit wieder verwendeten Teilen - Anforderungen an
Funktionalität und Prüfungen
Sûreté de fonctionnement des produits contenant des composants réutilisés - Exigences
pour la fonctionalité et les essais
Ta slovenski standard je istoveten z: EN 62309:2004
ICS:
03.120.01 Kakovost na splošno Quality in general
21.020 =QDþLOQRVWLLQQDþUWRYDQMH Characteristics and design of
VWURMHYDSDUDWRYRSUHPH machines, apparatus,
equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62309
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2004
ICS 03.120.30 ; 21.020
English version
Dependability of products containing reused parts –
Requirements for functionality and tests
(IEC 62309:2004)
Sûreté de fonctionnement des produits Zuverlässigkeit von Produkten
contenant des composants réutilisés - mit wieder verwendeten Teilen –
Exigences pour la fonctionalité Anforderungen an Funktionalität
et les essais und Prüfungen
(CEI 62309:2004) (IEC 62309:2004)
This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62309:2004 E
Foreword
The text of document 56/945/FDIS, future edition 1 of IEC 62309, prepared by IEC TC 56,
Dependability, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 62309 on 2004-09-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62309:2004 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
ISO 9000 NOTE Harmonized as EN ISO 9000:2000 (not modified).
ISO 9001 NOTE Harmonized as EN ISO 9001:2000 (not modified).
IEC 60300-1 NOTE Harmonized as EN 60300-1:2003 (not modified).
IEC 60300-2 NOTE Harmonized as EN 60300-1:2004 (not modified).
__________
- 3 - EN 62309:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-191 1990 International Electrotechnical Vocabulary - -
(IEV)
Chapter 191: Dependability and quality of
service
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
Première édition
STANDARD
First edition
2004-07
Sûreté de fonctionnement des produits
contenant des composants réutilisés –
Exigences pour la fonctionnalité
et les essais
Dependability of products containing
reused parts –
Requirements for functionality
and test
© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
PRICE CODE R
Commission Electrotechnique Internationale
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue
62309 © IEC:2004 – 3 –
CONTENTS
FOREWORD.5
INTRODUCTION.9
1 Scope.11
2 Normative references .11
3 Terms and definitions .11
4 Requirements for a product containing reused parts .15
4.1 General .15
4.2 Functional properties and quality.17
4.3 Environmental issues .17
4.4 Safety .19
4.5 Remaining working life .19
4.6 Traceability .19
5 Qualification testing for products containing reused parts .19
5.1 Evaluation of current status .19
5.2 Reliability assessment.21
5.3 Final inspection and testing .21
6 Reconditioning .21
6.1 Reconditioning of parts.21
6.2 Dismantling and restoration.21
7 Warranty and documentation .21
7.1 Life, failure rate, warranty period.21
7.2 Documentation .23
7.3 Product safety and control.23
Annex A (informative) Additional statements and an example .25
A.1 Reliability of qualified-as-good-as-new parts .25
A.2 Design documentation .27
A.3 Design for reuse.27
A.4 Economic aspects .29
A.5 Lifetime diagram.31
A.6 Example .31
Bibliography.39
Figure 1 – Parts reused for products.15
Figure 2 – Principle decision flow.17
Figure A.1 – Example for determination of the remaining working life of parts.25
Figure A.2 – Assignment of "level of detail for product" to "design aspects" .29
Figure A.3 – Lifetime diagram .31
62309 © IEC:2004 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DEPENDABILITY OF PRODUCTS CONTAINING REUSED PARTS –
REQUIREMENTS FOR FUNCTIONALITY AND TESTS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62309 has been prepared by IEC technical committee 56:
Dependability.
The text of this standard is based on the following documents:
FDIS Report on voting
56/945/FDIS 56/968/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
62309 © IEC:2004 – 7 –
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch"
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.