Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables

IEC 60794-2-10:2011 covers simplex and duplex optical fibre cables for indoor use except for cables used in terminated assemblies specified by IEC 60794-2-50. The requirements of the Sectional specification IEC 60794-2 are applicable to cables covered by this standard. The main changes with respect to the previous edition are as follows: - A new clause has been introduced: Clause 4 - Dimensions; - Test conditions and requirements have been made more accurate; - The new Subclause 5.5 has been added to give useful figures. This publication is to be read in conjunction with IEC 60794-1-1:2001, IEC 60794-1-2:2003 and IEC 60794-2:2002.

Lichtwellenleiterkabel - Teil 2-10: LWL-Innenkabel - Familienspezifikation für Simplex- und Duplexkabel

Câbles à fibres optiques - Partie 2-10: Câbles intérieurs à fibres optiques - Spécification de famille pour les câbles simplex et duplex

La CEI 60794-2-10:2011 couvre les câbles à fibres optiques simplex et duplex pour usage intérieur à l'exception des câbles utilisés dans les cordons spécifiés par la CEI 60794-2-50. Les exigences de la spécification intermédiaire CEI 60794-2 sont applicables aux câbles couverts par la présente norme. Les principales modifications par rapport à l'édition antérieure sont indiquées ci-dessous: - Un nouvel article a été intégré: Article 4 - Dimensions; - Les conditions et exigences d'essai ont été modifiées pour gagner en précision; - Le nouveau Paragraphe 5.5 a été ajouté pour donner des chiffres utiles. Cette publication doit être lue conjointement avec la CEI 60794-1-1:2001, la CEI 60794-1-2:2003 et la CEI 60794-2:2002.

Optični kabli - 2-10. del: Notranji kabli - Rodovna specifikacija za kable simpleks in dupleks (IEC 60794-2-10:2011)

Ta del IEC 60794 je rodovna specifikacija, ki zajema optične kable simpleks in dupleks za notranjo uporabo, razen za kable, ki se uporabljajo v zaključenih sestavih, ki jih določa IEC 60794-2-50. Zahteve področnih specifikacij IEC 60794-2 veljajo za kable, ki jih zajema ta standard.
Za kable, namenjene za vgradnjo v industrijske aplikacije, ki jih določa ISO/IEC 24702, so lahko dodatno zahtevane specifikacije MICE (glej dodatek B.2).

General Information

Status
Published
Publication Date
06-Oct-2011
Withdrawal Date
13-Sep-2014
Current Stage
6060 - Document made available - Publishing
Start Date
07-Oct-2011
Completion Date
07-Oct-2011

Relations

Buy Standard

Standard
EN 60794-2-10:2011 - BARVE
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60794-2-10:2011
01-december-2011
1DGRPHãþD
SIST EN 60794-2-10:2004
2SWLþQLNDEOLGHO1RWUDQMLNDEOL5RGRYQDVSHFLILNDFLMD]DNDEOHVLPSOHNVLQ
GXSOHNV ,(&
Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for
simplex and duplex cables (IEC 60794-2-10:2011)
Lichtwellenleiterkabel - Teil 2-10: LWL-Innenkabel - Familienspezifikation für Simplex-
und Duplexkabel (IEC 60794-2-10:2011)
Câbles à fibres optiques - Partie 2-10: Câbles intérieurs à fibres optiques - Spécification
de famille pour les câbles simplex et duplex (CEI 60794-2-10:2011)
Ta slovenski standard je istoveten z: EN 60794-2-10:2011
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
SIST EN 60794-2-10:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60794-2-10:2011

---------------------- Page: 2 ----------------------

SIST EN 60794-2-10:2011

EUROPEAN STANDARD
EN 60794-2-10

NORME EUROPÉENNE
October 2011
EUROPÄISCHE NORM

ICS 33.180.10 Supersedes EN 60794-2-10:2003


English version


Optical fibre cables -
Part 2-10: Indoor optical fibre cables -
Family specification for simplex and duplex cables
(IEC 60794-2-10:2011)


Câbles à fibres optiques -  Lichtwellenleiterkabel -
Partie 2-10: Câbles intérieurs à fibres Teil 2-10: LWL-Innenkabel -
optiques - Familienspezifikation für Simplex- und
Spécification de famille pour les câbles Duplexkabel
simplex et duplex (IEC 60794-2-10:2011)
(CEI 60794-2-10:2011)





This European Standard was approved by CENELEC on 2011-09-14. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60794-2-10:2011 E

---------------------- Page: 3 ----------------------

SIST EN 60794-2-10:2011
EN 60794-2-10:2011 - 2 -
Foreword
The text of document 86A/1396/FDIS, future edition 2 of IEC 60794-2-10, prepared by SC 86A, Fibres
and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 60794-2-10:2011.
This document supersedes EN 60794-2-10:2003.
The main changes with respect to EN 60794-2-10:2003 are as follows:

– A new clause has been introduced: Clause 4 – Dimensions.
– Test conditions and requirements have been made more accurate.
– The new Subclause 5.5 has been added to give useful figures.

EN 60794-2-10:2011 is to be used in conjunction with EN 60794-1-1, EN 60794-1-2 and EN 60794-2.

The following dates are fixed:
(dop) 2012-06-14
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2014-09-14
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 60794-2-10:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60654-4 NOTE  Harmonized as EN 60654-4.
IEC 60721-1 NOTE  Harmonized as EN 60721-1.
IEC 60721-3-3 NOTE  Harmonized as EN 60721-3-3.
IEC 61000-6-2 NOTE  Harmonized as EN 61000-6-2.
IEC 61918 NOTE  Harmonized as EN 61918.

----------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.