EN 60684-3-228:2004

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1

Gives the requirements for one type of heat-shrinkable, flame retarded, with a nominal shrink ratio 2:1, fluid resistant polyvinylidene fluoride sleeving for use at temperatures up to 175 C. This sleeving is normally supplied with an internal diameter up to 25,4 mm, and the standard colour is transparent. Sizes or colours other than those specifically listed in this standard may be available as custom items. These items are considered to comply with this standard if they comply with the property requirements listed in Tables 2, 3, 4 and 5, with the exception of dimensions and mass. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This edition includes the following significant technical change with regard to the previous edition: Replacement of the thermal endurance test method according to EN 60216 with a long term ageing test, i.e. 3 000 h at the recommended maximum temperature found suitable for use,in order to provide safe thermal test data within a workable time scale.

Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 228: Wärmeschrumpfende Polyvinylidenefluoridschläuche, halbsteif, flammwidrig, flüssigkeitsbeständig, Schrumpfverhältnis 2:1

Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 228: Gaines thermorétractables semi-rigides en fluorure de polyvinylidène, retardées à la flamme, résistant aux fluides, rapport de rétreint 2:1

Donne les exigences relatives à un type de gaines thermorétractables en fluorure de polyvinylidène, retardées à la flamme de rapport de rétreint nominal 2:1 et résistant aux fluides, pour un usage allant jusqu'à une température de 175 °C. Cette gaine est normalement fournie avec un diamètre intérieur allant jusqu'à 25,4 mm et la couleur standard est transparente. D'autres dimensions et d'autres couleurs que celles spécifiquement indiquées dans cette norme peuvent être disponibles, comme articles spéciaux. Ces articles sont considérés comme satisfaisant à cette norme s'ils correspondent aux caractéristiques indiquées dans les Tableaux 2, 3, 4 et 5, en excluant les dimensions et la masse. Les matériaux conformes à la présente spécification satisfont aux niveaux de performance établis. Cependant il convient que le choix d'un matériau, par un utilisateur, pour une application spécifique, soit fondé sur les exigences réelles nécessaires pour obtenir les performances satisfaisantes pour cette application, et qu'il ne soit pas fondé sur cette seule spécification. Cette édition comprend la modification technique majeure suivante par rapport à l'édition précédente: Remplacement de la méthode d'essai d'endurance thermique conformément à la EN 60216 par un essai de vieillissement à long terme, c'est-à-dire 3 000 h, à la température maximale recommandée pour un usage adapté, afin de fournir des données d'essai thermiques comprises dans une échelle de temps exploitable.

Gibke izolacijske cevi – 3. del: Specifikacija za posamezne vrste cevi – 228. list: Toplotno skrčljive poltoge poliviniliden-fluoridne cevi, ognjevarne, odporne proti tekočinam, razmerje krčenja 2:1 (IEC 60684-3-228:1998)

General Information

• Status: Published
• Publication Date: 24-Aug-2004
• Withdrawal Date: 30-Jun-2007
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/SC 15C - IEC_SC_15C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 25-Aug-2004
• Completion Date: 25-Aug-2004
• Ref Project: SIST EN 60684-3-228:2005 - Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1

Relations

• Replaces: EN 60684-3-228:1998 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60684-3-228:2005

STANDARD
januar 2005
Gibke izolacijske cevi – 3. del: Specifikacija za posamezne vrste cevi – 228.
list: Toplotno skrčljive poltoge poliviniliden-fluoridne cevi, ognjevarne,
odporne proti tekočinam, razmerje krčenja 2:1 (IEC 60684-3-228:1998)
(istoveten EN 60684-3-228:2004)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving -
Sheet 228: Heat- shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame
retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-228:1998)
ICS 29.035.20 Referenčna številka
SIST EN 60684-3-228:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60684-3-228
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2004

ICS 29.035.20 Supersedes EN 60684-3-228:1998


English version


Flexible insulating sleeving
Part 3: Specifications for individual types of sleeving
Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving,
flame retarded, fluid resistant, shrink ratio 2:1
(IEC 60684-3-228:2004)


Gaines isolantes souples Isolierschläuche
Partie 3: Spécifications pour types Teil 3: Anforderungen für einzelne
particuliers de gaines Schlauchtypen
Feuille 228: Gaines thermorétractables Blatt 228: Wärmeschrumpfende
semi-rigides en fluorure de polyvinylidène, Polyvinylidenefluoridschläuche, halbsteif,
retardées à la flamme, résistant flammwidrig, flüssigkeitsbeständig,
aux fluides, rapport de rétreint 2:1 Schrumpfverhältnis 2:1
(CEI 60684-3-228:2004) (IEC 60684-3-228:2004)



This European Standard was approved by CENELEC on 2004-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.


CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60684-3-228:2004 E

---------------------- Page: 2 ----------------------

EN 60684-3-228:2004 - 2 -
Foreword
The text of document 15C/1599/FDIS, future edition 2 of IEC 60684-3-228, prepared by SC 15C,
Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60684-3-228 on 2004-07-01.
This European Standard supersedes EN 60684-3-228:1998.
The significant technical change with regard to EN 60684-2-228:1998 is:
- Replacement of the thermal endurance test method according to EN 60216 with a long term ageing
test, i.e. 3 000 h at the recommended maximum temperature found suitable for use, in order to
provide safe thermal test data within a workable time scale.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60684-3-228:2004 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60684-3-228:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by
...