SIST EN 61987-11:2017
(Main)Industrial-process measurement and control - Data structures and elements in -process equipment catalogues - Part 11: Lists of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures (IEC 61987-11:2016)
Industrial-process measurement and control - Data structures and elements in -process equipment catalogues - Part 11: Lists of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures (IEC 61987-11:2016)
IEC 61987-11:2012(E) provides a characterisation of industrial process measuring equipment (device type dictionary) for integration in the Component Data Dictionary (CDD), and generic structures for Operating Lists of Properties (OLOPs) and Device Lists of Properties (DLOPs) of measuring equipment in conformance with IEC 61987-10.
Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 11: Merkmalleisten (ML) für Messgeräte für den elektronischen Datenaustausch - Allgemeine Strukturen (IEC 61987-11:2016)
Mesure et commande des processus industriels - Structures de données et éléments dans les catalogues d'équipement de processus - Partie 11: Listes des propriétés (LOP) d'équipements de mesure pour l'échange électronique de données - Structures génériques (IEC 61987-11:2016)
L'IEC 61987-11:2012 fournit une caractérisation des équipements de mesure de processus industriels (dictionnaire des types de dispositifs) pour l'intégration dans le dictionnaire de données de composants (CDD, en anglais "Component Data Dictionary") et des structures génériques pour les listes de propriétés fonctionnelles (OLOP, en anglais "Operating List of Properties") et les listes de propriétés des dispositifs de mesure (DLOP, en anglais "Device List of Properties") en conformité avec la CEI 61987-10. La présente version bilingue (2014-01) correspond à la version anglaise monolingue publiée en 2012-07.
Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v katalogih procesne opreme - 11. del: Seznam lastnosti merilne opreme za elektronsko izmenjavo podatkov - Splošne strukture (IEC 61987-11:2016)
Standard 61987-11:2012(E) zagotavlja karakterizacijo merilne opreme za industrijske procese (slovar tipov naprav) za integracijo v slovar podatkov o komponentah (CDD) ter splošne strukture operativnih seznamov lastnosti (OLOP) in seznamov lastnosti naprav (DLOP) za merilno opremo v skladu s standardom IEC 61987-10.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61987-11:2017
01-september-2017
1DGRPHãþD
SIST EN 61987-11:2012
Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v
katalogih procesne opreme - 11. del: Seznam lastnosti merilne opreme za
elektronsko izmenjavo podatkov - Splošne strukture (IEC 61987-11:2016)
Industrial-process measurement and control - Data structures and elements in -process
equipment catalogues - Part 11: Lists of properties (LOPs) of measuring equipment for
electronic data exchange - Generic structures (IEC 61987-11:2016)
Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der
Prozessleittechnik - Teil 11: Merkmalleisten (ML) für Messgeräte für den elektronischen
Datenaustausch - Allgemeine Strukturen (IEC 61987-11:2016)
Mesure et commande des processus industriels - Structures de données et éléments
dans les catalogues d'équipement de processus - Partie 11: Listes des propriétés (LOP)
d'équipements de mesure pour l'échange électronique de données - Structures
génériques (IEC 61987-11:2016)
Ta slovenski standard je istoveten z: EN 61987-11:2017
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 61987-11:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61987-11:2017
---------------------- Page: 2 ----------------------
SIST EN 61987-11:2017
EUROPEAN STANDARD EN 61987-11
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2017
ICS 25.040.40; 35.100.20 Supersedes EN 61987-11:2012
English Version
Industrial-process measurement and control - Data structures
and elements in -process equipment catalogues - Part 11: Lists
of properties (LOPs) of measuring equipment for electronic data
exchange - Generic structures
(IEC 61987-11:2016)
Mesure et commande des processus industriels - Industrielle Leittechnik - Datenstrukturen und -elemente in
Structures de données et éléments dans les catalogues Katalogen der Prozessleittechnik - Teil 11: Merkmalleisten
d'équipement de processus - Partie 11: Listes des (ML) für Messgeräte für den elektronischen
propriétés (LOP) d'équipements de mesure pour l'échange Datenaustausch - Allgemeine Strukturen
électronique de données - Structures génériques (IEC 61987-11:2016)
(IEC 61987-11:2016)
This European Standard was approved by CENELEC on 2017-01-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61987-11:2017 E
---------------------- Page: 3 ----------------------
SIST EN 61987-11:2017
EN 61987-11:2017
European foreword
The text of document 65E/467/CDV, future edition 2 of IEC 61987-11, prepared by SC 65E “Devices
and integration in enterprise systems” of IEC/TC 65 “Industrial process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61987-11:2017.
The following dates are fixed:
• latest date by which the document has to be (dop) 2017-10-21
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-04-21
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61987-11:2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61987-11:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60770-1:2010 NOTE Harmonized as EN 60770-1:2011
IEC 61360-1:2009 NOTE Harmonized as EN 61360-1:2010
IEC 61360-2 NOTE Harmonized as EN 61360-2
IEC 61987-12 NOTE Harmonized as EN 61987-12
IEC 81346-1:2009 NOTE Harmonized as EN 81346-1:2009
ISO 10303 (Series) NOTE Harmonized as ENV 10303 (Series)
2
---------------------- Page: 4 ----------------------
SIST EN 61987-11:2017
EN 61987-11:2017
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60947-5-6 - Low-voltage switchgear and controlgear -- EN 60947-5-6 -
Part 5-6: Control circuit devices and
switching elements - DC interface for
proximity sensors and switching amplifiers
(NAMUR)
IEC 61069-5 - Industrial-process measurement, control EN 61069-5 -
and automation - Evaluation of system
properties for the purpose of system
assessment - Part 5: Assessment of
system dependability
IEC 61508-6 - Functional safety of EN 61508-6 -
electrical/electronic/programmable
electronic safety-related systems -- Part 6:
Guidelines on the application of IEC
61508-2 and IEC 61508-3
IEC 61987-1 2006 Industrial-process measurement and EN 61987-1 2007
control - Data structures and elements in
process equipment catalogues -- Part 1:
Measuring equipment with analogue and
digital output
IEC 61987-10 2009 Industrial-process measurement and EN 61987-10 2009
control - Data structures and elements in
process equipment catalogues - Part 10:
Lists of Properties (LOPs) for Industrial-
Process Measurement and Control for
Electronic Data Exchange - Fundamentals
- - + AC 2011
IEC 61987-92 - - -
IEC 62424 - Representation of process control EN 62424 -
engineering - Requests in P&I diagrams
and data exchange between P&ID tools
and PCE-CAE tools
3
---------------------- Page: 5 ----------------------
SIST EN 61987-11:2017
---------------------- Page: 6 ----------------------
SIST EN 61987-11:2017
IEC 61987-11
®
Edition 2.0 2016-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial-process measurement and control – Data structures and elements in
process equipment catalogues –
Part 11: Lists of properties (LOPs) of measuring equipment for electronic data
exchange – Generic structures
Mesure et commande des processus industriels – Structures de données et
éléments dans les catalogues d'équipement de processus –
Partie 11: Listes des propriétés (LOP) d'équipements de mesure pour l'échange
électronique de données– Structures génériques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.20 ISBN 978-2-8322-3692-5
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 61987-11:2017
– 2 – IEC 61987-11:2016 © IEC 2016
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 10
3.1 Terms and definitions concerning measuring instruments . 10
3.2 Terms and definitions concerning relationships . 11
4 General . 13
4.1 Characterization scheme. 13
4.2 Aspects . 13
4.3 Rules for the construction of LOPs with block structure . 15
4.3.1 Block order . 15
4.3.2 Position of cardinality properties . 15
4.3.3 Naming of blocks created by cardinality . 15
4.3.4 Characterizing property . 15
4.3.5 Validity . 15
4.4 OLOP and DLOP . 15
4.5 Operating conditions . 16
4.6 Measuring equipment configuration . 17
5 Operating list of properties (OLOP) . 18
5.1 Generic block structure . 18
5.2 Base conditions . 19
5.3 Process case . 19
5.3.1 General . 19
5.3.2 Process case variables . 19
5.3.3 Other process case variable . 20
5.4 Operating conditions for device design. 20
5.4.1 General . 20
5.4.2 Installation design conditions . 20
5.4.3 Environmental design conditions. 20
5.4.4 Process design conditions . 21
5.4.5 Pressure-temperature design conditions . 21
5.5 Process equipment . 22
5.5.1 General . 22
5.5.2 Line or nozzle . 22
5.6 Physical location . 22
5.6.1 General . 22
5.6.2 Available power supply . 22
5.6.3 Process criticality classification . 23
5.6.4 Area classification . 23
6 Device list of properties (DLOP) . 23
6.1 General . 23
6.1.1 Generic block structure . 23
6.1.2 Relationship to IEC 61987-1 . 25
6.1.3 Multivariable devices . 25
6.2 Identification . 26
---------------------- Page: 8 ----------------------
SIST EN 61987-11:2017
IEC 61987-11:2016 © IEC 2016 – 3 –
6.3 Application . 26
6.4 Function and system design . 26
6.4.1 General . 26
6.4.2 Dependability . 26
6.5 Input . 26
6.5.1 General . 26
6.5.2 Measured variable . 26
6.5.3 Auxiliary input . 27
6.6 Output. 28
6.6.1 General . 28
6.6.2 output . 29
6.7 Digital communication . 30
6.7.1 General . 30
6.7.2 Digital communication interface . 30
6.8 Performance . 30
6.8.1 General . 30
6.8.2 Reference conditions for the device . 30
6.8.3 Performance variable . 30
6.9 Rated operating conditions . 32
6.9.1 General . 32
6.9.2 Installation conditions . 32
6.9.3 Environmental design ratings . 33
6.9.4 Process design ratings . 33
6.9.5 Pressure-temperature design ratings . 34
6.10 Mechanical and electrical construction . 34
6.10.1 General . 34
6.10.2 Overall dimensions and weight . 34
6.10.3 Structural design . 35
6.10.4 Explosion protection design approval . 35
6.10.5 Codes and standards approval . 35
6.11 Operability . 35
6.11.1 General . 35
6.11.2 Basic configuration . 35
6.11.3 Parametrization . 35
6.11.4 Adjustment . 35
6.11.5 Operation . 35
6.11.6 Diagnosis . 35
6.12 Power supply . 36
6.13 Certificates and approvals. 36
6.14 Component part identifications . 36
7 Composite devices . 36
7.1 Structure of composite devices . 36
7.2 Aspects of components . 38
8 Additional aspects . 38
8.1 Administrative information . 38
8.2 Calibration and test . 39
8.3 Accessories . 39
8.4 Device documents supplied. 39
8.5 Packaging and shipping . 39
---------------------- Page: 9 ----------------------
SIST EN 61987-11:2017
– 4 – IEC 61987-11:2016 © IEC 2016
8.6 Digital communication parametrization . 39
8.7 Example of a composite device with aspects . 39
Annex A (informative) Device type dictionary – Classification of process measuring
equipment according to measuring characteristics . 41
Bibliography . 60
Figure 1 – Characterisation of measuring equipment . 13
Figure 2 – Simplified UML scheme of device, LOPs and aspects . 14
Figure 3 – Assignment of OLOPs and DLOPs for equipment used to measure one type
of measured variable . 16
Figure 4 – Structure of a composite device . 37
Figure 5 – Example for the structure of an LOP for a composite device showing
different aspects related to different sub-components . 40
Table 1 – Structure of the block “Operating conditions for device design” in the OLOP . 17
Table 2 – Structure of the block “Rated operating conditions” in the DLOP . 17
Table 3 – Generic block structure of an OLOP . 18
Table 4 – Generic block structure of a DLOP . 24
Table 5 – DLOP structure for composite devices . 37
Table A.1 – Classification scheme for process measuring equipment . 41
---------------------- Page: 10 ----------------------
SIST EN 61987-11:2017
IEC 61987-11:2016 © IEC 2016 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL –
DATA STRUCTURES AND ELEMENTS IN PROCESS
EQUIPMENT CATALOGUES –
Part 11: Lists of properties (LOPs) of measuring equipment
for electronic data exchange – Generic structures
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61987-11 has been prepared by subcommittee 65E: Devices and
integration in enterprise systems, of IEC technical committee 65: Industrial-process
measurement, control and automation.
This second edition cancels and replaces the first edition published in 2012. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) The classification in Table A.1 has been amended to reflect the changes in the
classification scheme of process measuring equipment in the CDD due to the development
of IEC 61987-14, IEC 61987-15 and IEC 61987-16.
b) Annex A has become “informative”.
---------------------- Page: 11 ----------------------
SIST EN 61987-11:2017
– 6 – IEC 61987-11:2016 © IEC 2016
The text of this standard is based on the following documents:
CDV Report on voting
65E/467/CDV 65E/509/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 61987 series, published under the general title Industrial-process
measurement and control – Data structures and elements in process equipment catalogues,
can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
---------------------- Page: 12 ----------------------
SIST EN 61987-11:2017
IEC 61987-11:2016 © IEC 2016 – 7 –
INTRODUCTION
The exchange of product data between companies, business systems, engineering tools, data
systems within companies and, in the future, control systems (electrical, measuring and
control technology) can run smoothly only when both the information to be exchanged and the
use of this information has been clearly defined.
Prior to this document, requirements on process control devices and systems were specified
by customers in various ways when suppliers or manufacturers were asked to quote for
suitable equipment. The suppliers in their turn described the devices according to their own
documentation schemes, often using different terms, structures and media (paper, databases,
CDs, e-catalogues, etc.). The situation was similar in the planning and development process,
with device information frequently being duplicated in a number of different information
technology (IT) systems.
Any method that is capable of recording all existing information only once during the planning
and ordering process and making it available for further processing, gives all parties involved
an opportunity to concentrate on the essentials. A precondition for this is the standardization
of both the descri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.