EN 61300-2-15:2008

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15: Tests - Torque strength of coupling mechanism

This part of IEC 61300 applies an overload torque to twist-type coupling mechanisms. It is applicable to threaded or bayonet-twist type coupling mechanisms. It can be used to ensure that the coupling mechanism of a connector set or connector-device combination will withstand the torsional loads likely to be applied during normal service. Specific technical changes from the previous edition include reexamination of the pre-conditioning and rewriting of the entire composition according to the latest IEC Directives.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-15: Prüfungen - Torsionsfestigkeit der Verriegelung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-15: Essais - Robustesse du mécanisme de verrouillage aux efforts de torsion

IEC 61300-2-15:2008 applique un couple de surcharge à des mécanismes de verrouillage rotationnels. Elle est applicable à des mécanismes de verrouillage rotationnels filetés ou à baïonnette. Elle peut être utilisée pour vérifier que le mécanisme de verrouillage d’un jeu de connecteurs ou d’une combinaison connecteur-dispositif résistera aux charges de torsion susceptibles d’être appliquées dans des conditions normales de fonctionnement. Cette seconde édition annule et remplace la première édition parue en 1995, dont elle constitue une révision technique. Les modifications techniques spécifiques par rapport à l’édition précédente incluent le réexamen du préconditionnement et une réécriture du document complet conformément aux toutes dernières directives de l’IEC. La présente version bilingue (2020-08) correspond à la version anglaise monolingue publiée en 2008-02.

Optični spojni elementi in pasivne komponente - Postopki osnovnega preskušanja in meritev - 2-15. del: Preskusi - Vrtilna trdnost spojnega mehanizma (IEC 61300-2-15:2008)

General Information

• Status: Published
• Publication Date: 08-May-2008
• Withdrawal Date: 31-Mar-2011
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 09-May-2008
• Completion Date: 09-May-2008
• Ref Project: SIST EN 61300-2-15:2008 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-15: Tests - Torque strength of coupling mechanism

Relations

• Replaces: EN 61300-2-15:1997 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15: Tests - Torque strength of coupling mechanism
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-15:2008
01-september-2008
1DGRPHãþD
SIST EN 61300-2-15:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH3RVWRSNLRVQRYQHJDSUHVNXãDQMD
LQPHULWHYGHO3UHVNXVL9UWLOQDWUGQRVWVSRMQHJDPHKDQL]PD,(&

Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-15: Tests - Torque strength of coupling mechanism
(IEC 61300-2-15:2008)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-15: Prüfungen - Torsionsfestigkeit der Verriegelung (IEC 61300-2
-15:2008)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-15: Essais - Robustesse du mécanisme
de verrouillage aux efforts de torsion (CEI 61300-2-15:2008)
Ta slovenski standard je istoveten z: EN 61300-2-15:2008
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-15:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61300-2-15

NORME EUROPÉENNE
May 2008
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-2-15:1997


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-15: Tests -
Torque strength of coupling mechanism
(IEC 61300-2-15:2008)


Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Méthodes fondamentales d'essais und passive Bauteile -
et de mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-15: Essais - Teil 2-15: Prüfungen -
Robustesse du mécanisme Torsionsfestigkeit der Verriegelung
de verrouillage aux efforts de torsion (IEC 61300-2-15:2008)
(CEI 61300-2-15:2008)




This European Standard was approved by CENELEC on 2008-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-15:2008 E

---------------------- Page: 2 ----------------------

EN 61300-2-15:2008 - 2 -
Foreword
The text of document 86B/2539/CDV, future edition 2 of IEC 61300-2-15, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-15 on 2008-04-01.
This European Standard supersedes EN 61300-2-15:1997.
Specific technical changes from EN 61300-2-15:1997 include reexamination of the pre-conditioning.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-15:2008 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61300-2-15:2008
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) app
...