EN 60684-3-229:2003

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1

Gives the requirements for one type of heat shrinkable, semi-flexible, polyvinylidene fluoride, flame retarded, fluid resistant sleeving that has been found suitable for use up to temperatures of 150 °C. The nominal shrink ratio is 2:1. This sleeving is normally supplied in bore sizes up to 25,4 mm and is transparent. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 229: Wärmeschrumpfende Polyvinylidenefluoridschläuche, gering flexibel, flammwidrig, flüssigkeitsbeständig, Schrumpfverhältnis 2:1

Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 229: Gaines thermorétractables semi-souples en fluorure de polyvinylidène, retardées à la flamme, résistant aux fluides, rapport de rétreint 2:1

Donne les prescriptions relatives à un type de gaine thermo-rétractable en fluorure de polyvinylidène, semi-souple, retardée à la flamme et résistant aux fluides, dont l'utilisation est adaptée pour des températures allant jusqu'à 150 °C. Le rapport de rétreint nominal est de 2:1. Cette gaine est normalement fournie avec des diamètres intérieurs allant jusqu'à 25,4 mm et est transparente. Les matériaux conformes à cette norme satisfont aux niveaux de performance établis. Cependant, il convient que la sélection d'un matériau par un utilisateur pour une application particulière soit basée sur les caractéristiques réelles nécessaires pour atteindre les perfor-mances appropriées dans cette application et pas uniquement basée sur la présente norme.

Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 229. list: Toplotno skrčljive polgibke poliviniliden-fluoridne cevi, ognjevarne, odporne proti tekočinam, razmerje krčenja 2:1 (IEC 60684-3-229:2003)

General Information

• Status: Published
• Publication Date: 17-Apr-2003
• Withdrawal Date: 31-Mar-2006
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/SC 15C - IEC_SC_15C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 18-Apr-2003
• Completion Date: 18-Apr-2003
• Ref Project: SIST EN 60684-3-229:2004 - Flexible insulating sleeving -- Part 3 : Specifications for individual types of sleeving -- Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1

Standards Content (Sample)

SLOVENSKI SIST EN 60684-3-229:2004

STANDARD
september 2004
Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 229. list:
Toplotno skrčljive polgibke poliviniliden-fluoridne cevi, ognjevarne, odporne
proti tekočinam, razmerje krčenja 2:1 (IEC 60684-3-229:2003)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving -
Sheet 229: Heat- shrinkable semi-flexible polyvinylidene fluoride sleeving, flame
retarted, fluid resistant, shrink ratio 2:1 (IEC 60684-3-229:2003)
ICS 29.035.20 Referenčna številka
SIST EN 60684-3-229:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60684-3-229
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2003

ICS 29.035.20


English version


Flexible insulating sleeving
Part 3 : Specifications for individual types of sleeving
Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving,
flame retarded, fluid resistant, shrink ratio 2:1
(IEC 60684-3-229:2003)


Gaines isolantes souples Isolierschläuche
Partie 3: Spécifications pour types Teil 3: Anforderungen für einzelne
particuliers de gaines Schlauchtypen
Feuille 229: Gaines thermorétractables Blatt 229: Wärmeschrumpfende
semi-souples en fluorure de polyvinylidène, Polyvinylidenefluoridschläuche,
retardées à la flamme, résistant aux fluides, gering flexibel, flammwidrig,
rapport de rétreint 2:1 flüssigkeitsbeständig,
(CEI 60684-3-229:2003) Schrumpfverhältnis 2:1
(IEC 60684-3-229:2003)



This European Standard was approved by CENELEC on 2003-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60684-3-229:2003 E

---------------------- Page: 2 ----------------------

EN 60684-3-229:2003 - 2 -
Foreword
The text of document 15C/1414/FDIS, future edition 1 of IEC 60684-3-229, prepared by SC 15C,
Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60684-3-229 on 2003-04-01.

The following dates were fixed:

– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-01-01

– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-04-01

Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60684-3-229:2003 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60684-3-229:2003
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60684-1 1980 Specification for flexible i
...