Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement

The particular requirements of this part apply to fixed equipment in conducting locations where movement of persons is restricted by the location, and to supplies for portable equipment for use in such locations. A conducting location with restricted movement is comprised mainly of metallic or other conductive surrounding parts, within which it is likely that a person will come in contact through a substantial portion of his body with the metallic or other conductive surrounding parts and where the possibility of interrupting this contact is limited.

Errichten von Niederspannungsanlagen - Teil 7-706: Anforderungen für Betriebsstätten, Räume und Anlagen besonderer Art - Leitfähige Bereiche mit begrenzter Bewegungsfreiheit

Installations électriques basse tension - Partie 7-706: Exigences pour les installations ou emplacements spéciaux - Enceintes conductrices exiguës

Les exigences particulières de la présente partie s'appliquent aux matériels fixes des enceintes conductrices exiguës et à l'alimentation des appareils portatifs à l'intérieur de ces enceintes. Une enceinte conductrice exiguë est un local ou emplacement de travail dont les parois sont essentiellement constituées de parties métalliques ou conductrices, à l'intérieur duquel une personne peut venir en contact, sur une partie importante de son corps, avec les parties conductrices environnantes et dont l'exiguïté limite les possibilités d'interrompre ce contact.

Nizkonapetostne električne inštalacije - 7-706. del: Zahteve za posebne inštalacije ali lokacije - Omejeni prevodni prostori (IEC 60364-7-706:2005, spremenjen)

General Information

Status
Published
Publication Date
30-Jan-2007
Withdrawal Date
31-Jan-2009
Current Stage
6060 - Document made available - Publishing
Start Date
31-Jan-2007
Completion Date
31-Jan-2007

Relations

Buy Standard

Standardization document
HD 60364-7-706:2007
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prHD 60364-7-706:2004
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 60364-7-706:2007
01-oktober-2007
1DGRPHãþD
SIST HD 384.7.706 S1:2000
SIST IEC 60364-7-706:2006
1L]NRQDSHWRVWQHHOHNWULþQHLQãWDODFLMHGHO=DKWHYH]DSRVHEQHLQãWDODFLMH
DOLORNDFLMH2PHMHQLSUHYRGQLSURVWRUL ,(&VSUHPHQMHQ
Low-voltage electrical installations -- Part 7-706: Requirements for special installations or
locations - Conducting locations with restricted movement
Errichten von Niederspannungsanlagen -- Teil 7-706: Anforderungen für Betriebsstätten,
Räume und Anlagen besonderer Art - Leitfähige Bereiche mit begrenzter
Bewegungsfreiheit
Installations électriques basse tension -- Partie 7-706: Exigences pour les installations ou
emplacements spéciaux - Enceintes conductrices exiguës
Ta slovenski standard je istoveten z: HD 60364-7-706:2007
ICS:
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
SIST HD 60364-7-706:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 60364-7-706:2007

---------------------- Page: 2 ----------------------

SIST HD 60364-7-706:2007


HARMONIZATION DOCUMENT
HD 60364-7-706

DOCUMENT D'HARMONISATION
January 2007
HARMONISIERUNGSDOKUMENT

ICS 29.020; 91.140.50 Supersedes HD 384.7.706 S1:1991


English version


Low-voltage electrical installations -
Part 7-706: Requirements for special installations or locations -
Conducting locations with restricted movement
(IEC 60364-7-706:2005, modified)


Installations électriques basse tension -  Errichten von Niederspannungsanlagen -
Partie 7-706: Exigences pour les Teil 7-706: Anforderungen
installations ou emplacements spéciaux - für Betriebsstätten, Räume und Anlagen
Enceintes conductrices exiguës besonderer Art -
(CEI 60364-7-706:2005, modifiée) Leitfähige Bereiche mit begrenzter
Bewegungsfreiheit
(IEC 60364-7-706:2005, modifiziert)




This Harmonization Document was approved by CENELEC on 2006-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for implementation of this
Harmonization Document at national level.

Up-to-date lists and bibliographical references concerning such national implementations may be obtained on
application to the Central Secretariat or to any CENELEC member.

This Harmonization Document exists in three official versions (English, French, German).

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. HD 60364-7-706:2007 E

---------------------- Page: 3 ----------------------

SIST HD 60364-7-706:2007
HD 60364-7-704:2007 - 2 -
FOREWORD
The text of document 64/1478/FDIS, future edition 2 of IEC 60364-7-706, prepared by IEC TC 64, Electrical
installations and protection against electric shock, was submitted to the IEC-CENELEC parallel vote.
A draft amendment, prepared by SC 64A, Protection against electric shock, of Technical Committee
CENELEC TC 64, Electrical installations and protection against electric shock, was submitted to the formal
vote.
The combined texts were approved by CENELEC as HD 60364-7-706 on 2006-02-01.
This Harmonization Document supersedes HD 384.7.706 S1:1991.
The following dates were fixed:
- latest date by which the existence of the HD (doa) 2006-08-01
has to be announced at national level
- latest date by which the HD has to be implemented (dop) 2007-08-01
at national level by publication of a harmonized
national standard or by endorsement
- latest date by which the national standards conflicting (dow) 2009-02-01
with the HD have to be withdrawn
Annexes ZA and ZB have been added by CENELEC.
In this standard, the common modifications to the International Standard are indicated by a vertical line in the
left margin of the text.

---------------------- Page: 4 ----------------------

SIST HD 60364-7-706:2007
- 3 - HD 60364-7-706:2007
INTRODUCTION
The requirements of this part of HD 60364 supplement, modify or replace certain of the general requirements
of the other parts of HD 60364.
The clause numbering of part 706 follows the pattern and corresponding references of HD 60364. The
numbers following the particular number of part 706 are those of the corresponding parts,
...

SLOVENSKI OSIST prHD 60364-7-706:2004

PREDSTANDARD
junij 2004
Electrical installations of buildings -- Part 7-706: Requirements for special
installations or locations - Conducting locations with restricted movement
ICS 91.140.50 Referenčna številka
OSIST prHD 60364-7-706:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------
64/1390/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJET DE COMITÉ POUR VOTE (CDV)

Project number IEC 60364-7-706, Ed.2
Numéro de projet
IEC/TC or SC: Date of circulation Closing date for voting (Voting
TC 64
Date de diffusion mandatory for P-members)
CEI/CE ou SC:

Date de clôture du vote (Vote
2004-04-23
obligatoire pour les membres (P))
2004-09-24
Titre du CE/SC: Installations électriques et TC/SC Title: Electrical installations and protection
protection contre les chocs électriques against electric shock
Secretary: Dipl.-Ing. Reinhard PELTA, Germany
Secrétaire: E-mail: reinhard.pelta@siemens.com
Also of interest to the following committees Supersedes documents
Intéresse également les comités suivants Remplace les documents
   64/1340/CD - 64/1388/CC
Functions concerned
Fonctions concernées
Safety EMC Environment Quality assurance
Sécurité
CEM Environnement Assurance qualité
CE DOCUMENT EST TOUJOURS À L'ÉTUDE ET SUSCEPTIBLE DE THIS DOCUMENT IS STILL UNDER STUDY AND SUBJECT TO CHANGE. IT
MODIFICATION. IL NE PEUT SERVIR DE RÉFÉRENCE. SHOULD NOT BE USED FOR REFERENCE PURPOSES.
LES RÉCIPIENDAIRES DU PRÉSENT DOCUMENT SONT INVITÉS À RECIPIENTS OF THIS DOCUMENT ARE INVITED TO SUBMIT, WITH THEIR
PRÉSENTER, AVEC LEURS OBSERVATIONS, LA NOTIFICATION DES COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF
DROITS DE PROPRIÉTÉ DONT ILS AURAIENT ÉVENTUELLEMENT WHICH THEY ARE AWARE AND TO PROVIDE SUPPORTING
CONNAISSANCE ET À FOURNIR UNE DOCUMENTATION EXPLICATIVE. DOCUMENTATION.



Title : IEC 60364-7-706, Ed. 2: Electrical
Titre : CEI 60364-7-706, Ed. 2: Installations
installations of buildings – Part 7-706:
électriques des bâtiments - Partie 7-706:
Requirements for special installations or
Prescriptions pour les installations et
locations – Conducting locations with restricted
emplacements particuliers - Enceintes
movement
conductrices exiguës




Note d'introduction Introductory note




ATTENTION ATTENTION

CDV soumis en parallèle au vote (CEI) Parallel IEC CDV/CENELEC Enquiry
et à l’enquête (CENELEC)


Copyright © 2004 International Electrotechnical Commission, IEC. All rights reserved. It is
permitted to download this electronic file, to make a copy and to print out the content for the sole
purpose of preparing National Committee positions. You may not copy or "mirror" the file or
printed version of the document, or any part of it, for any other purpose without permission in
writing from IEC.
FORM CDV (IEC)

2002-08-09

---------------------- Page: 2 ----------------------
60364-7-706 Ed. 2/CDV © IEC:20xx – 2 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_________
ELECTRICAL INSTALLATIONS OF BUILDINGS –
Part 7-706: Requirements for special installations or locations –
Conducting locations with restricted movement


FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.