EN IEC 61918:2018/A11:2019
(Amendment)Industrial communication networks - Installation of communication networks in industrial premises
Industrial communication networks - Installation of communication networks in industrial premises
This document specifies basic requirements for the installation of media for communication networks within and between the automation islands, of industrial sites. This standard covers balanced and optical fibre cabling. It also covers the cabling infrastructure for wireless media, but not the wireless media itself. Additional media are covered in the IEC 61784-5 series. This document is a companion standard to the communication networks of the industrial automation islands and especially to the communication networks specified in the IEC 61158 series and the IEC 61784 series. In addition, this document covers the connection between the generic telecommunications cabling specified in ISO/IEC 11801-3 and the specific communication cabling of an automation island, where an automation outlet (AO) replaces the telecommunication outlet (TO) of ISO/IEC 11801-3. NOTE If the interface used at the AO does not conform to that specified for the TO of ISO/IEC 11801-3, the cabling no longer conforms to ISO/IEC 11801-3 although certain features, including performance, of generic cabling may be retained. This document provides guidelines that cope with the critical aspects of the industrial automation area (safety, security and environmental aspects such as mechanical, liquid, particulate, climatic, chemicals and electromagnetic interference). This document does not recognise implementations of power distribution with or through Ethernet balanced cabling systems that are not specified in IEEE 802.3af and in IEEE 802.3at. This document deals with the roles of planner, installer, verifier, and acceptance test personnel, administration and maintenance personnel and specifies the relevant responsibilities and/or gives guidance.
Industrielle Kommunikationsnetze – Installation von Kommunikationsnetzen in Industrieanlagen
Réseaux de communication industriels - Installation de réseaux de communication dans des locaux industriels
Industrijska komunikacijska omrežja - Inštalacija komunikacijskih omrežij v industrijskih okoljih
Ta dokument opredeljuje osnovne zahteve za inštalacijo medijev za komunikacijska omrežja v avtomatiziranih otokih industrijskih lokacij in med njimi. Ta dokument vključuje uravnoteženo kablovje iz optičnih vlaken. Prva tako vključuje kabelsko infrastrukturo za brezžične medije, vendar ne samih brezžičnih medijev. Dodatne medije obravnava IEC 61784-5 (vsi deli). Ta dokument je spremljevalni standard h komunikacijskim omrežjem industrijskih avtomatiziranih otokov in zlasti h komunikacijskim omrežjem, opredeljenim v standardu IEC 61158 (vsi deli) in IEC 61784 (vsi deli). Poleg tega ta dokument obravnava povezavo med generičnim telekomunikacijskim kablovjem, določenim v standardu ISO/IEC 11801-3, in posebnim komunikacijskim kablovjem avtomatiziranega otoka, pri čemer avtomatizirani izhod (AO) nadomešča telekomunikacijski izhod (TO) iz standarda ISO/IEC 11801-3. OPOMBA: Če vmesnik, uporabljen na avtomatiziranem izhodu, ni v skladu s tistim, ki je določen za telekomunikacijski izhod v standardu ISO/IEC 11801-3, kablovje ni več skladno s standardom ISO/IEC 11801-3, čeprav se nekatere značilnosti generičnega kablovja, vključno z zmogljivostjo, lahko ohranijo. Ta dokument podaja smernice za urejanje kritičnih vidikov industrijskih avtomatiziranih področij (varnost in okoljski vidiki, kot so motnje zaradi mehanskih vplivov, tekočine, delcev, podnebja, kemikalij in elektromagnetizma). Ta dokument ne priznava postopkov distribucije energije prek uravnoteženih kabelskih sistemov Ethernet ali z njimi. Ta dokument obravnava vloge načrtovalca, monterja, preveritelja, osebja za opravljanje prevzemnih preskusov, administrativnega osebja in osebja za vzdrževanje ter opredeljuje ustrezne odgovornosti in/ali podaja smernice.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2019
Industrijska komunikacijska omrežja - Inštalacija komunikacijskih omrežij v
industrijskih okoljih
Industrial communication networks - Installation of communication networks in industrial
premises
Industrielle Kommunikationsnetze – Installation von Kommunikationsnetzen in
Industrieanlagen
Réseaux de communication industriels - Installation de réseaux de communication dans
des locaux industriels
Ta slovenski standard je istoveten z: EN IEC 61918:2018/A11:2019
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61918:2018/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2019
ICS 25.040.40; 33.020; 35.240.50
English Version
Industrial communication networks - Installation of
communication networks in industrial premises
Réseaux de communication industriels - Installation de Industrielle Kommunikationsnetze - Installation von
réseaux de communication dans des locaux industriels Kommunikationsnetzen in Industrieanlagen
This amendment A11 modifies the European Standard EN IEC 61918:2018; it was approved by CENELEC on 2019-04-03. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61918:2018/A11:2019 E
European foreword
This document (EN IEC 61918:2018/A11:2019) has been prepared by CLC/TC 65X “Industrial-
process measurement, control and automation”.
The following dates are fixed:
• latest date by which this d
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.